Don’t let your builders do your wiring!!!

it looks like the builders wired the wing that's called a wing not a wing a wing wing and then see how they've because it's got a new this is a b it's gone USB on it a fingers crossed we're going to do the old twisty twisty twisty put some lube on obviously you don't want to go in dry because you've got better odds of it going in with a bit of lube aren't you what's the matter it's nice just yeah just happy to have the donut yeah yeah good what's the matter hey people oh okay you were pretty fresh [Music] it's so white you can't see it oh right we're here um we've introduced ourselves look at the van James it's for another job look we've got a little date hub a switch a power distribution and a patch panel I haven't bought the switch yet but um we're gonna fit a new fuse board and then do some testing James got a couple of little jobs to do aren't you nice little couple of jobs from there look what would be two more okay more so we're going for a 10 Way SPD fuse box and then some rcbos that's not for this job have we got any blanks in this van anywhere do we have a hunt or not what we we robbed them all from the other job it's all right okay we'll come back to you when we've set up there's one is there yeah that's what it's been done okay look there's no blanks the module blanks and they've sold out yesterday when I went so this is the board we're replacing um one two three four five six ways in use and then to comply I think the guy installed that the 30 milliamps so but you lose every circuit in the house if that trip so we're gonna put 100 amp switch in there it'll just be become an isolator keep the tail 16 mil check the fuse should be a 60 if it's not um you could upgrade it to an 80 and we'll see how we feel and we're gonna change this board and then James has got a socket to do and um fan and isolator and yeah let's get on with it you work under the um health and safety at work at you're not allowed to work live so you have to pull the main fuse yeah yeah exactly yeah yeah so I thought what this problem is yeah no it's um it's not yeah but this is the fuse board this is Ian's lovely fuse board um we're just going to disconnect this one you've got a little job in here to do James didn't you just can have a look we've got to add a socket for the client in here look they got a electric heater they've got it on an extension at the minute we're going to put a double socket in here hopefully these cables run in zone so James is going to cut a double in here hopefully find some cables behind this dot on dab wall here I don't even know how to do a ring do you know no we just thought we went that one off and it looks like the builders wired the wing it's called a wing not a wing a win-win look four in that's quality James yeah yes that is have you been doing privates or no no no so how are we going to do this then because I assume that'll be underline so there'll be one set coming that way but yeah that's that's interesting I've never seen it done like that before seriously four in two into out why wouldn't you just put two in a connector in the back wouldn't you to keep it as a ring but all right so we'll have to do a little bit with this route me no grommets look no sleeping I'll leave that off you can have a play with that yeah yeah and then you can at least do R1 correctly but what we'll have to do now is look take this one off in here look there's nothing there we'll have to take this one off in here and then see how they've because it's got a new this is a b it's gone USB on it we'll have to see how they've done the joint in there yeah all right Jane yeah all right don't touch that now so before putting any music on this time lapse I thought I'd do a voiceover because I keep getting demonetized for um music that's not royalty free so what I'm doing first here is removing the old consumer net um wooden patress that's what they were back in the day I'm just using my Stanley blade because the client's done such a nice job here with the wallpaper so I don't really want to damage that so we get that off and out of the way little wiggle wiggle jiggle jiggle here we go off it comes just having a little look around now assessing the situation trimming off the little bit of paper there and then here comes the back plate there's actually an armored coming out the back here which I had to deal with so I'm just offering up the board now checking what lockouts I need to bring out what I need to do so I straighten off some ends changes in and out and then you'll see here I'll disappear for a second because I'm going to go off and get some fireproof grommets and stuff and just prep the fuse board down there on the floor that's what I'm doing now prepping the fuse board distribution board consuming it whatever you want to call it back now just to check marking up the ceiling so we're just going to get the M18 multi-tool out now um we've actually got the M18 vac as well so a nice combo there to take off that little bit of architrave that's in our way nice to have a second pair of hands with James just to catch all the Dust so remove that piece there that will that will give a bit of space for the fuse board to step to the ceiling and what we do now we just trim out the ceiling because we need a little bit more space on those cables those Knockouts are about 30 min off the back of the board there so just cut out with a pad saw it's just a bit easier so there's no damage on the cables because they're all above there and then I'll just sort of straighten them out come back with a fuse board which will be fully prepped there little cut I've got one bit of grommet strip in the back there you'll see in a second why I've got that there just to take that armored into the back which isn't glanded which I can't do anything about because it's above the lean to porch roof so you've got to do the best you can do on the day fireproof gauntlets in the top there to receive all the cables and the tails make sure you bring the main Surf and the two Mains Tails through the same hole there otherwise Eddie will uh come and visit you some just put some washers on the fixings there just to give spreads to load a little bit more and then we just got the Milwaukee level on the bottom there making sure everything's level got the M12 out today M12 SDS I will link all these below for you and the M18 impact so there we go the board's mounted if you want that because you've cut that hole and didn't cut the cable and didn't cut cables earned a donut or a little up The Marvelous foreign socket what we're going to do that runs around in that zone luckily we found him James has cut the capping off so fingers crossed we're going to do the old twisty twisty twisty on there and put some lube on obviously you don't want to go in dry because you've got better odds of it going in with a bit Lube on in you what's the matter it's nice just yeah just happy to have the donut yeah yeah good that freaking hell is that Jesus Christ if it was an airport so I'm going to twist him on there Lube him up stick him in and then um hopefully it pulls through and comes out with a new socket towards you all right yes twist this home here it'll tell you about yeah we'll do yeah just this round all right put the twin and a half two twists I didn't mean to do that start again start again James well we've done two twists oh no because I'm going to use the neutral because it's a bit fat cable isn't it that camera on is that can it see what I'm doing that click it you smacking me in the face again what we'll do it again huh you've always got to sit on something in here yeah it's good for you though okay let's do this let's just straighten them out a bit mate is that that's right Ben that's true okay yep let's get some lube on it you're gonna give it a pull first if it comes uh yeah what's the matter okay have you noticed I hadn't got any hay fever look at that right you ready okay get off the cable that's it she is starting to go it's yeah let's go on top man I'm starting to go mate yeah keep going once you get a bit more because you've got to go gentle now because it's going in now yeah ready yeah as soon as it goes in you've got to go gentle see yeah you don't want to go to like mad at the start all right hold on mate I've gotta keeps nice and straight to go in an angle it's gonna not go in properly but you want to go in straight if I've gone all right that's it it's nice you'll start getting some lube going in there now so you should find it's a bit easier pull it with your hands now to keep it time to the wall come on go on no drive it back yeah I reckon it's hitting the end of the capping just going in you might give it back yes yeah it's just catching the captain mate if I could see where that capping is it back a little tiny bit more yeah Mike try again go on no tighten it can we try to go I need some toots one there sir all right I'm not kidding it's a party one all right let's get a bit more though look at that ends please yeah is that what's going to do it now it is that's tight mate yeah I ain't coming that's hitting the captain I reckon put it back a tiny bit if you can perform yeah look here now we've got enough this end now we've got enough this end why don't we cut and pull one that way yeah because look because it's not in the table where is it what leave that on there now because we need that as a that's our length isn't it give me as much as you come this way like we had cut it and it'll give me enough to connect and tie on and give it the last shot James can you see on the cable that's cutting um [Music] yeah that's it that's it right leave that there let me cut this enough to connect look let's spin the camera around me and see if we're doing that does that one yeah I can't see on the screen the screen color glands I don't know is it still on yeah it's still long but I can't see what it says I swear though James no we could pretend we connected it though just leave it yeah just poke a cave in the wall what is that doing I can't see tap the screen and you can see yeah I got greasy on fingers well I'm gonna tie this back on either mate yeah stay with your greasy fingers because then you can poke this into me this way can't you yeah tie on again on the neutral again yeah thank you okay all this little sausage on sausage let's do it bad for you mate a lot of you they are no poison mate catch me eating a sausage James well I'm not what are you laughing at huh why couldn't you eat sauce before pardon obviously eat a sausage how long ago months ago bad boy bye [Applause] seem to go that way easier didn't it when we but you can definitely tell it's been rubbing against this whole thing right oops tape first you kidding me let's flatten them out a bit look yeah [Music] how sharp flattening down it's a whole video just on this yeah that's right right it's a new socket featuring people this project mate would you want to do it because you're already lucky just lost it in your fingers right right you gotta keep that flat yeah yeah cameras on you now ready keep it in that capping ready yeah because it's starting to come off his head foreign foreign all right I'll make it a little bit of a slack yeah okay ready yep got it that's it back sir I've been used to untwisty risky doesn't it so now we do it sometimes mate 10 low battery and there you go there's your soccer connections there you go new cable there pulled in the cap in and then we'll do some of this well we've got the board in um obviously we're missing some blacks we're going to go off to the wholesalers and get some James has been I will when I gotta come back and do testing but we're going to get it back on for the client he's added his new socket in got it into wagos for now because we've ran out of sockets and then this was that's this was that one before so what he's going to do is split the ring you're going to put grommets on you yeah yeah four grommets on he's gonna split the ring so our new cable will go in with that we'll make in the back yeah and then that and that will go into the socket yeah Magic change this main switch now Pablo's on his way to isolate for me see these are dead these would be nice they'll be dead but we need to get rid of this rcd so we've got a under that main switch to go in let's have a look there we go lovely job blue he's been in pool diffuse for me made safe and managed to change the main switch give me the rcd how about you oh this needs a bit of a I'm gonna tweak it up or can it come up a bit or there's the Box you mean that's probably in the Box all right Surplus was not straight then is it look it's not I'm gonna put a little bit of um filler and paint his mate around here okay okay I'm gonna do some testing I've started okay what there's a board I've talked up the bottoms of the mcbs the client can verify that I've done it and film it did you hear me do it yeah yeah he heard me do it um so a little bit of slacks it's quite it's all right you've got to work with what you've got to work with we've got a ring which is nice five zero five one and nine nine on the cpcs um I'm gonna work through do some R1 r2s and then we'll get on with some live testing it's nice to actually see a shower um 0.27 how and how to do you in it huh no okay well you're going to pull that into an isolator anyway and then add a new piece in yeah so that's going that switch is going to be used for the fan that'll be the bathroom lights that'll go fan isolator inside the cupboard that's what the client wants so 0.27 on the shower mate put it on and I can see what I'm bloody doing that's it the garage is a bit rough it's not Jimmy no gland on it so obviously not doing that today without left to go down as a bit of a need some a bit of work on that I need to gland on it really to Earth down the armored um but there's a little board in here just to sockets and lights we just added this fan isolator in for the client James has finally gone in the Loft it must be you must be thinking he's getting some sort of donut after this yeah be under there mate under that floor and there's three cables see I he's the one that comes up to the lighting is it it's gonna be here yeah is it the one that goes up look to the light see that one on the rafter yeah clipped up there is it that one is it that one there goes into our Junction how old is it okay it's the one at the junction box then goes down the wall does it one good instruction box yeah there's gonna be mate because it's a fan and all sorts off of it Jimmy to come up or you're right it'll be one that drops down to the pull the find the cable that goes down the wall is that another one cut is it is it the third is that the third one of Jesus he fully pulled it out of the war hold on have a look I'll wiggle it mate one sec that one you know you want the other side didn't you see that one there basically find out where it goes and disconnect it that's it that one there yeah pull it up where's it go to mate have a look which way it's this one okay find it then so where's the end you just pulled up show me the end okay and where's it come back underneath yep so it's a junction box not sure do you want to pull that through in this way get out of the way there's two bits but yeah yeah come on give me the end lift it up for me Jesus [Applause] foreign all right [Music] they drew the juice have they I'm gonna do that that's Corey style wouldn't it not going to draw the joists like that through choice just clip along just clip along here all the edges yeah definitely don't drill these no no oh Corey Mac when are you coming back if you did we won't mention it though we'll edit that oh blessing he's a good lad um so where's the end mate hello pull it out then Tia start one Mrs Jones lights just flown at the ceiling James pulling the bloody slack right where does that go right right undo the JB then yeah and where does that end go from the JB right so undo the JB because you want a little screwdriver what's on the top of the junction box yeah turn the camera towards you mate that's better yeah no yeah sorry it's good footage Jays it's natural it's all natural can I zoom in on this camera no I thought it's like a nice thing can you I can't Zoom as such right what have you got inside there mate yeah so just disconnect are both ends should be a brown and blue shouldn't it and then put the put the Box lid back on and that's it happy cool I'll jump down then yeah well there we go because they're Sports in the living room we're not going to put any labels on here we're going to put them under the cover there so it's not um show basically a little bit of splodge down there it's blocked down there well James is going to do me a label for the board managed to do a nice bit of ceiling round with some um fire silicon I've got one do a little bit making good you're going to do me a label and I'm gonna have a do me a put five years on it just because yeah it's holding it it's like sold to me James it's older than me a bit of silicon around this socket we change sockets because that box was tiny bit proud so that one sits flush and there's a bit more giving this one so we're going to make good this

Channel: CJR ELECTRICAL

Views: 65,753

Keywords: Cjrelectrical, Electrician, fault finding, Install a new fusebox, Consumer unit

Id: QypAO6aZARM

Length: 30min 0sec (1800 seconds)

Published: Sat Jul 22 2023