Connecting two lan through Cisco packet Tracer

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
hello and welcome to another video tutorial answers could make a tracer in this video I will explain about how to connect to win to each other so just start we've select engineering devices but number my left office here what do I see on your ass here I think there is enough then we connected with it is 2960 is you create another layer here is what I saw through PC in Vienna but also 1940s okay so first of all let's connect this with cables with copper straight to cable Plus eternity looseness one cool let's in here connected positon a cool yes now connect this sweet this fist through router so you can connect it with faceted 0/4 are big objective gigabit ethernet 0/1 amid citizens in a bit since this what now we connected the topology is ready now let's stand for configuration how we will configure this so let's start from the first one yeah it needs the gate resto first of all I will enter default gate left it will be one ninety two dot one sixty eight dot one dot two fifty four like Beatrice IP address configure IP address of classes to one ninety two dot one sixty eight dot one dot one same again for PC configure yeah what you want to convert one sixty eight dot one dot two fifty four address of this basic if you live one ninety two dot one sixty eight dot one dot that is what has been there Cleary Hill to do that one sixty eight dot one dot 254 static because I forgot 192 168 1 to me simply specie that's a good death I will give you this to Class B address so it will be in 172 that's 16 not 1.2 54 one soon to conduct one six-four same again yeah your hair could be 172 cut six dot what 2:54 the address of this will be once 32.16 dot in one submit must come automatically as for the PCP there will be 172 cut 16.1 to what for IP address will be 172 16.1 got I think a completely submerge must come automatically now you can figure out all the pieces now just let's configure the router now first of all we have to enable the poor status for status is all gigabit 0/0 we give this one IP address what was our default gateway for that well it was one ninety two dot one sixty eight dot one dot two fifty four yes you can alternately you can do it through command-line interfaces what is in Turkish gigabit interface to the sleeper or status as well IP address I give you one central 16.1 got it was to 84 okay now or capillary is complete now let's start to test this one yes we need little detail for this cool to beginning yes fast forward time I think it's okay no now I want to test these two lengths whether they are communicating with each other are not so first of an eyelid in this VC from this one so we're to discuss come on were what was the idea just of this PC it was plus C address it was one ninety two dot one sixty eight dot one dot what I took yes is finding which 32 bytes of data first of all you see a request hello the first record was lost because it it was just the first time it was communicating so it's not but it's similar to the environment there is three packet force in send packet for reciprocity three lost is one so 25% loss anyway this is a boot result so you just bring one more DC from this side to this one stop come on come or when soon 2.16 that 1.1 now you see this is pinion statistics show that packet for faculty center shield is for loss to zero so zero person loss is successful you can it you do is this yes similar to the orderly I would just one is enough ICMP go picture and that's it for today later see you in the next video
Info
Channel: Nisar Ahmad
Views: 59,328
Rating: 4.7915635 out of 5
Keywords: Cisco Packet Tracer
Id: qLZGVTn0zME
Channel Id: undefined
Length: 9min 58sec (598 seconds)
Published: Sun Apr 10 2016
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.