Hi guys, thanks for tuning in to another
video on ForgottenWeapons.com. I'm Ian McCollum, and I'm here today at the James Julia Auction House taking a look at some of the guns they're going to be selling their upcoming fall of 2017 firearms auction. And today we have a really pretty extraordinary gun to take a look at. This may not look like a whole lot from back there, but the history on it, and what this was mechanically capable of doing is really impressive. This is a Confederate Whitworth sniper rifle. Now, let me just put it this way, this rifle in British military tests before 1860 was capable of sub minute of angle accuracy at 500 yards. That is no mean feat at all, that's really, really impressive. Now Whitworth ... so there are Whitworth rifles
and then there are Confederate Whitworth rifles. And the vast majority of what Whitworth
produced had nothing to do with the Confederacy. These were the product of a man named
Sir Joseph Whitworth, and he was a serious engineering aficionado. You may
recognise his name, he was the guy who standardised the Whitworth thread which
was the first standardised thread pitch pattern adopted by the British Empire, you know,
put into common standardised use. Which is an important aspect of, say, an industrial
revolution, having standardised thread pitches. He also developed engineer's blue. If you've
done any machining you know about that blue that you put on parts to show where ... machining
has happened and where it hasn't. That was him. This guy was a seriously important
figure in industrial production. And when he set his mind to doing a gun what
he decided was that he could make and measure (and it's important to recognise that both of these
things go hand-in-hand, in some ways it doesn't matter how precise your tools actually are if you can't
measure the results to an equal level of precision), he decided he could make and measure
flat surfaces much better than round ones, and his idea for a rifle was to
make a hexagonal bore with flats. Instead of being a round bore that
had rifling that cut into the bullet, he figured he would make, well, a polygonal barrel, he eventually standardised on hexagonal,
where the bullet was also a hexagonal bullet and it exactly fitted the rifling. What
that allowed him to do was very precisely make the whole length of the
barrel without imperfections, and then make a bullet that
would mechanically fit the barrel. So where a standard bullet ... that rifling actually crushes or, well it doesn't cut, it crushes its
pattern into the surface of the bullet. We can do that very well today, but in 1860, you know, 150 years ago,
it was difficult to do that precisely. You'd get different rifle
engagement every time you fired, which meant your bullets weren't
always quite gonna go to the same place. What the Whitworth allowed was to make a bullet
that didn't have any rifling cutting into the bullet. It was simply spinning to
match the pattern of the barrel. In total the Whitworth company
made about 13,700 of these guns. And then they went bankrupt, by the end
of the 1860s they were out of business. The problem was this is a fantastically
accurate gun, but it's an extremely expensive gun. In other videos I've talked about how
good guns are always a balance of different pros and cons, different capabilities and detriments.
And the Whitworth was a total one-trick pony of a gun, it could shoot very accurately. However it was expensive,
it was slow to produce, it was time-consuming, it fouled quite quickly, because you had this very
close mechanical fit between the bullet and the barrel. And yet you're shooting black powder, that
black powder fouling will pretty quickly start to cause problems trying to reload the gun. Everything about this was bad,
except it's phenomenal accuracy. ... Whitworth submitted this for British military
testing, and they really liked the accuracy, but because of all the other downsides this would never
have been adopted by the British military as a standard arm. Well the same thing kind of
applies to its Confederate use. The Confederacy was never going to adopt
this thing as their standard rifle because, jeez, they could hardly afford
any guns, much less these things. One source I found said that just the rifle without
packaging, without the scope, without any embellishments, was 96 dollars in 1860. That is an
extremely expensive gun, that's 3 times, ... at least 3 times the cost the Union was paying
for high-tech breech-loading carbines at that point. Maybe 4 times the price, so. However ... elements of the Confederacy
did buy a small number of these guns, and they were actually used in the Civil War.
There's documentation that shows that there's correspondence that survives between Confederate
arsenals and Confederate combat units talking about Whitworth rifles and their supply of ammunition,
and that sort of thing. These were very specialised sharpshooter's rifles, and those sharpshooters, it appears,
moved around quite a bit, wherever they were needed. ... Spent fired Whitworth bullets have been found
on a huge number of ... Civil War battlefields, so. The numbers are a bit vague, ... different
sources suggest as few as maybe 50 of these guns were imported, up to maybe
one source says about 250 were ordered, and about half that many actually made it
through the Union blockade to be delivered. In any case we're definitely not talking
about any more than 125 of these rifles, and their survival chances from all the
way back to the Civil War are quite small. ... I think it's 19 of these are known to exist,
or 20, or something right in that range. Very few of these survive today.
So let's take a closer look at it. I'll show you the distinctive markings and features
and what you would look for on a Whitworth rifle. Now the Whitworth was a standard percussion
fired gun, and other than the hexagonal bore and the extreme precision with which it was made,
it functioned just like every other muzzle loader. So you would pour powder and a wad and press a bullet
down the barrel, you would affix a percussion cap here, (Put the hammer at half cock.) And then fire the rifle and rinse and repeat. We have some markings on the lock plate
here, Whitworth Rifle Company, Manchester. (Obviously in England.) And then we have a crest and a W, that's
the Whitworth company crest right there. They're a little hard to see because this
rifle is, well, it's been around for 150 years, but we have markings right here. We have
a Birmingham proof mark, a couple of them. 52, that is the bore diameter, this is a 52 bore rifle,
which is actually .451 inch, it's a .45 calibre rifle. And then we have our serial number
right here, That is C, as in Charlie, 544. Whitworth manufactured these guns in 1,000 unit
groups, or 1,000 gun groups. They started with number 1 and they went up to number 1,000, or 999 I presume,
and then they would restart with an 'A' prefix, and then a 'B' prefix, etc. Now all of the existing known and ... confirmed and
documented Confederate rifles are in the B and the C prefix groups, and the highest known one is C,
I believe, 619. So this number falls within that range. Then there's one other marking typically found on
the Confederate rifles, and that is on the bottom tang of the rifle, this 'second quality' marking. And that
actually doesn't have anything to do with the shooting capability of the rifle, that has to do with the
finish. Because of the cost of these guns, most of them were sold to high-end target
shooters, or hunters, or generally wealthy customers. And so they had a very nice fit and
finish, often engraving or fancy checkering. The ones that the Confederacy bought, they needed
a good shooting rifle, but they needed to pay as little as possible because they didn't have a
have a lot of money to dump into this sort of thing. So they typically purchased what
were called 'second quality' guns, which had a reduced level of exterior fit and polish
- well not fit, but finish quality and polish. This scope is obviously going to raise some questions. The Confederate rifles were fitted by the Whitworth
company with 4x power Davidson scopes, like this one. This rifle, this particular rifle,
as with many of the surviving Confederate ones was actually originally found
without a scope or mounts. So, it has been refitted with a new scope and mount,
those aren't the original ones from the Confederacy. And it's interesting that these scopes are mounted
on the side of the rifle. If you do some reading online, you'll see people suggesting that this was intended
for supine shooting. Where you lay on your back. This was a style that was used in competition at the time, I did a little bit of tinkering with it myself and there
is in fact a supine position where this sort of works. It's not all that comfortable to me, but then again I
haven't done any practice of that style of shooting. Basically the two ways you can do this are
either to rest the stock of the gun in your armpit, in which case you need the sights actually moved
much farther back than this, or you can actually wrap your ... left hand around the back
of your head to hold on to the butt plate. If you hold it that way, you have a
cheek weld, a cheek rest up in this area, and that could actually work with this style of scope. That said though, you can also pretty
easily get a nice sight picture with this scope as it is with a normal standing
or any other traditional position. So you'll read about people saying that,
you know, Whitworth snipers could be identified by their black eyes, you know,
from getting hit in the face by the scope. I don't think there's much basis in reality in that,
because you actually have plenty of eye relief on this and it fits better than you would expect. Now if we take a look at the muzzle, you
can see the hexagonal rifling that's in there, and it's flared out a little bit at the crown to
allow you to more easily start a bullet in the bore. Like I said, this is a .451 calibre gun, rifled
barrel, and the load was a 530 grain projectile with 70 grains of black powder.
So barrel length is 33 inches, and it has a 1 in 20 twist, which is a lot faster
than the standard 1853 Enfield musket of the time. In addition Whitworth pointed out that
you would want to use a very hard bullet. With a normal muzzle loader you want a soft
bullet so that the base of the bullet can expand and get a nice seal on the rifling. With this,
the seal is a mechanical one and you don't want the bullet to expand. In
fact you want it to stay unexpanded because that will allow you to fully take
advantage of the precision of the gun. So you'd use a very hard alloy
when making bullets for these. Fortunately for us, the results of at least one
British accuracy test have actually survived, and they put this up against an 1853 musket (which by the way was made to look
downright terrible in the process), and we have actual numbers on exactly
how this rifle, well not this specific rifle, but how the Whitworth shot in competition.
[NB - see later correction video.] And the the closest range that they shot at was
500 yards, at which distance it made a 4.4 inch group. That's 0.85 MOA. There are very few shooters who can do that
reliably ... without using a mechanical rest with a modern gun. Being able to do that with a black-powder
muzzle loader, I keep saying this, sorry but it really remains true, it's an amazing feat. They then continued shooting all the way out to 1,800
yards, and the accuracy did diminish on the gun. But at 1,100 yards they were still doing a 2.5 minute
group, at 1,400 yards they had a 3.78 minute group, and at 1,800 yards (at which point, by the way,
they didn't even bother to shoot the Enfield), this thing, the Whitworth, was able
to put out a 7.4 minute of angle group. So it's (OK I know this is getting annoying),
but it was a remarkably accurate rifle. In order to change the scope elevation you
would actually start by loosening this screw, right there, and then we can
adjust the scope on the other side There is a graduated scale on this side, and if we rotate
it up you can see there's a little index mark right there. And once this mounting screw is loose the scope
can slide up and down, so what you can do is change it to whatever elevation you want. And
I believe these markings are actually in degrees. So ... you would have to have figured out what angle
you want for the range that you are shooting at. But once you do that, you put it wherever you want
it and then tighten the screw down on the other side and that locks it into place. I think the Whitworth really goes to show you just what
can be accomplished with even very early machine tools. You know, we barely have good steel at
this point in history to make guns out of, much less CAD/CAM software and CNC machine tools. And yet, here Sir Joseph was able to mass-produce a firearm
capable of sub-minute of angle accuracy at 500 yards. That's really a ... it's hard to convey how
significant of a feat that is. He did really well, and these were fantastically prized rifles at the time. Of course he went out of business doing
it, because even if what you're producing is the best thing in the world, if you can't
do it at a price point that makes it feasible, well then it's not gonna become a long-term
successful venture, and Whitworth's wasn't. Now he went on to do plenty of other things, ... Whitworth's
rifle may have been a one-trick pony for accuracy, but Sir Joseph Whitworth was not, he had
plenty of other things to spend his time on. If you have any interest in Confederate arms, or
if you're interested in the history of sniping rifles, this is an extraordinarily rare piece and a really
interesting foundational important element to a collection. So, if you're interested in it, take a look at the
description text below, you'll find a link there to the James Julia catalogue page on
this particular rifle. You can check out all of the documentation they have with
it, they've actually got quite a bit with it, as well as their photos and everything else. And if you're interested, you can place a
bid on it over the web, or over the phone, or you can come here and participate live in the auction. Thanks for watching.
