Civic: $500 Ebay Turbo Kit Installation

there's a $98 ship to my front door now it didn't have all of this stuff in the description that's in the pictures but everything does come with it it came with the oil lines the gaskets timers flanges manifold turbo here's the turbo not exactly sure what size it is but I'll check and I'll let you guys know down Peiping intercooler piping so yeah this is all it and it's gonna go on it says it's capable of 450 horsepower but we're not gonna the car is not gonna be anything close to that right now we're probably only boots like eight pounds so yeah guys but I'm super excited I got the turbo kit in if you guys want to see this build subscribe if you haven't already and it's it's it's gonna be fun it's gonna be fun just having a turbo kit in the car it's gonna be really fun so yeah 500 bucks on eBay not sure how it holds up before everyone says oh you know it's such a cheap kit there's $500 we're gonna try it out yeah [Music] [Music] [Music] [Music] alright guys so we'll get it ready to install the turbo kit the first piece that's gonna go on is the turbo manifold and yeah it's pretty simple what we're doing here I already got the factory I already got the factory metal gasket on there I'm just gonna reuse that instead of the cheap one that comes with the kit and this is gonna be simple it's gonna be installing it the same exact way you would take off your headers and put your headers on so yeah first part of the kit right here let's get this on and we'll be good to go alright guys so basically right now we are just loosening these bolts that way I can clock the turbo miniature now when we got the turbo it was like this this is the train line so basically we just got to turn it 180 degrees so right there and then tighten it back up tighten it back up to wherever to wherever it's gonna fit the car we're gonna we're gonna just tighten one of them right now so we can adjust it later this is the feed line that's the return line the return line needs to be on the bottom and then we're gonna have to loosen this up as well to clock it and drop it down there for when we get it on the car but all you do to loosen these and tighten them up it's just tighten these bolts right here and these are loosen these and loosen these and that's it all right let's look all right guys so he is under the car and we are about ready to get these the gasket and the turbo on so he's just gonna push it up into place let's try to set these gaskets up right and I'm just gonna drop these down in there that way you can hold it into place let me get the nuts for them Shawn you got the other one then I push up push it up [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] yeah [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] alright guys so basically here's what we got going on I'm not gonna be able to show you this and it's gonna it's getting kind of dark under the car so here's what I'm gonna do this is a sandwich plate and basically I'm gonna use this for my oil supply line so right here these two holes I don't I haven't figured out which way I'm gonna put them yet but I'm gonna stick this most likely this is gonna be in here or there's adapters to make it fit on here but most likely it's gonna be in here this is going to supply the turbo with oil and I'm showing you this because it's not gonna fit under the camera is not going to get a good angle under the car so I'm showing it to you off the car so yeah here's it here it goes so the supply line is going to run from here to the turbo and basically what this is going to do where the oil filter was on the back of the block this piece right here is gonna screw in to the back of the block and it's gonna press the way it's setup it's gonna press the sandwich plate onto the back of the block and then also I'm gonna have to do now is screw the oil filter on and then you got a fresh oil supply line and it's you know basically this is you don't have to remove your oil pressure switch and stuff like that and it's just gonna get right on the back of it it's just gonna sit right on the back of the block where the oil filter was [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] yeah [Music] [Music] [Music] alright guys so we just installed the turbo kit we got a little more to do I still I haven't hooked up the boost vacuum lines yet I need to figure out what's going on with instance vacuum port right here is cramped down so I need to figure out how to open that up now I was going to just splice it into this you know put a T connection but I don't want to run too many things on there I need to hook up the blowout valve to that tool so I still got a lot more stuff to do I need to take this down this is about the ugliest weld I have ever seen but the guy only turns me 20 bucks to do it and I try to go to at least 15 shops and no one could take weld so he did it he said it wasn't gonna be pretty I would need to sand it down but I needed him to do it so I got it done for 20 bucks I can't complain it is ugly but I will hit it with the grinder and the flap will and bring it down and it'll look a lot better than it does so yeah I gotta hook all that stuff up now I didn't hook it up because the chip is coming in I'm running the p75 it's chipped and it's going to be on Chrome so once the rewritable chip comes in I ordered it from Xena cron the day before yesterday they said it will take a couple of days to get here so yeah the car is it's almost there guys so once I once I get the chip in once I get the chip in I also I gotta get the chip in I also got to get the jumper harness for the ECU once all of that comes in I should be able to run this thing I'm gonna run it on eight pounds and hopefully uh yeah hopefully it runs good on a hopefully the turbo system works good now let me know let me show you what now the the turbo the turbo it uh it took about like ten minutes to get this thing to start turning I don't know if it was the fluid even after I checked the line and made sure fluid was coming out and everything it took about 10 minutes to get it turning so you know it is what it is it got there and I can't even show you it now I can't get down there with the camera but uh yeah so everything's hooked up the drain line is hooked up everything this I try to tuck these the intercooler piping in as close as possible we made some makeshift brackets from Home Depot those were five dollars and yeah it's a it's all in as of right now with everything going on I got you know only five hundred dollars into the turbo kit twenty dollars for that the ECU cost $60 ECU cost $60 and the sandwich plate cost $20 the chip the chip was about the chip was $30 so yeah I got a little bit a little bit over $600 into the turbo system and yeah hopefully it sounds good hopefully hopefully it runs good it I mean just sitting there it runs good but I haven't been able to put it in a booth yet because there's still a lot more other things that I got it once that chip comes in I'll be good with that now I have to change the injectors I gotta put a fuel pressure regulator on and a fuel pump so all of that stuff will be coming soon and the good thing is I got everything to get it going to where it needs to go and you know I got everything to get it going to where it needs to be as far as running right with the chip and everything and it's gonna be a base map chip it's gonna be something simple just to drive it around a little bit here and there but just to make sure the whole systems working right and everything's working right and then I need to take it to the dyno to get tuned so there's still a lot more that I got to do but though the entire kit is on the hard is done and wasn't really hard it was actually pretty easy to do this you guys can do this yourself and about a day or two you know it doesn't take long and it's pretty simple so yeah but that's it guys five hundred dollar turbo kit install picked it up on eBay if you've been watching the channel I made a couple of I made a video of the unboxing if you want to know everything that was a was involved everything that was in the turbo kit check that video out because I explain everything that was in it so yeah that's it guys but the $500 eBay turbo kit uh super excited we're gonna be running booth soon and yeah but that's it guys thanks for watching if you haven't yet follow me on instagram at 79 productions on instagram you will get updates a lot sooner than youtube so follow me on instagram and then yeah that's it guys but like comment subscribe I'll catch you guys on the next one god bless you guys

Channel: 79th Productions

Views: 2,390,083

Rating: 4.8387785 out of 5

Keywords: ebay turbo, ebay turbo kit, cheap turbo, $100 turbo, b20 turbo, b16, b18, b20b, civic turbo, integra turbo, vtec, tj hunt, honda turbo, civic build

Id: VmqFIsqhjGQ

Length: 21min 56sec (1316 seconds)

Published: Fri Oct 05 2018

Reddit Comments

[u/SparklyGames]

If you think thats impressive you should watch Mike Finnegan and David Freiburger install an engine in the snow in a parking lot.

[u/snakeaway]

I like this style of video. Throwing money at a shop and then talking for 10 min in your driver seat is stale these days.

[u/chillllama]

I love everything about this:

• The shitty welds
• The disclaimer "never cut like this" - as he's cutting like this
• The intercooler "mount"

This is all so relatable. Who cares if it blows? Who cares about the finished product. You spent a day doing what you love, and you have fun doing it. That's all that matters

[u/mellofello808]

I ended up watching all 3 parts. Everything ended up going well. It was a good way to spend the morning. I like watching small youtubers like this guy. Seems like a good dude, and when he gets it running he is so stoked.

[u/Go_Easy_Hero]

I want to buy a civic and do this so badly.. would be a nice alternate to my daily.

EDIT: Any other cars that are easy to find unfettered that cheap power can be tacked on relatively easily?

[u/incogvigo]

Wtf, he used a twig wrapped in cloth to clean out metal shavings.

[u/just1mic]

didnt watch the video, but was there an increase in power? I'm thinking $500 doesnt include a tuner or new ecu.

[u/holyshithestall]

Every once in awhile I'll see an EX with a blown head and a crashed Odyssey or Acura rl3.5 for about $1200 total on craigslist and I'll be damned if I'm not itching to do a J series in an EX

[u/[deleted]]

I watched all three parts of this build - dude has some balls getting under the car using floor jacks!