CIMC configuration

okay first step we're going to connect the KBM dongle to the front of the UCF we'll snap into place then we'll connect the monitor keyboard and mouse more power on when we see the Cisco logo we'll hit up eight to enter the CI MC configuration hit f8 to enter the CI MC config at f8 and we'll see it's entering CI MC config utility so here you'll hit the spacebar to enable/disable up/down arrows to select items right now I want to set this and dedicated so I'm going to hit the spacebar when I hit the spacebar you'll see the X then I'm going to hit the down arrow I'm going to uncheck DHCP enabled by pressing the spacebar and I'm going to enter the IP address to assign I'm going to keep the subnet masks the same but this is where the setting is to change the subnet mask using the up and down arrows and also the default gateway when you keep hitting down arrow until I get to Nik redundancy I'm going to set this to none by hitting the X arrow then the last piece I'm going to hit f10 to save so hit f10 to save the configuration at 10 and then escape to exit and we can see here now that it took the new IP addresses I assigned to the CI MC configuration

Channel: Young Kim

Views: 63,659

Keywords: 2013, 01, 29, 12, 59, 51, 786

Id: KHQBvwO7pUU

Length: 3min 55sec (235 seconds)

Published: Tue Jan 29 2013