Can you make a BOX with AMAZON BASICS Tools? - LIVE

[Music] so [Music] uh so [Music] huh [Music] [Music] [Music] [Music] [Music] [Music] [Music] hey [Music] [Music] do [Music] hello everybody and welcome to the friday live stream it's fantastic that you've joined us here tonight in tonight's episode i am going to attempt to make an osb a solid osb box to hold an osb marking knife using amazon basics tools for the most part where we couldn't get amazon basics we've got a cheap substitute and then at the end of it we're going to do a giveaway of the box with the knife included we'll talk about it more in a second but for now let's roll the intro openly dougly so before we get stuck into anything firstly comments rob is currently moderating your uh your comments for this video so that's one of them was that planned yeah so yeah obviously you guys can have your comments read out loud if you use the streamlabs link in the description but rob is currently moderating them uh could we ask that you keep it somewhat clean because we tend to have younger viewers here and parents watching it with those younger viewers and the parents don't get too impressed when it gets a little bit when when things take a down turn should we say so yeah we're moderating them just in case but if you want to have your comment read out loud you can do so via the link in the description um i think we should talk a little bit about the tools that we have on our bench first before we change the camera though you may have noticed i'm wearing this nice tool belt this was um this was you wasn't it rob did you get this or is this something no oh no you got the bag this is equipped with all of my tools that i will be using for this demo we've got a six inch ruler or thereabouts we've got a flathead screwdriver we've got oh what's that a wrench we got there's all sorts around here i can't reach it but we got those on my belt and then as for the things on the bench let's uh let's flip to those right now i'm so sorry that's fine that's fine i'll get everything lined up or whatever uh i will start from up here so to begin with um we we tested it the other day and the mallet on my belt isn't quite substantial enough to drive one of these chisels unfortunately so we we had to get a proper mallet but that is pretty much the only thing on this bench that is proper okay so you'll have to forgive us for that one as for everything else here we have got a faithful marking out set with a block plane included um i have mixed feelings about faithful a lot of the time i i quite like their marking out equipment admittedly but when it comes to their planes and stuff i think it's where it starts getting a little bit faithless as opposed to faithful so i'm not too disheartened with this kit it's quite good there's a few problems with this sliding bevel which i'm sure we'll uncover in a minute i'm well very familiar with that but we've got a nice little box there and that's got some good marking out kit in it here let's start with this here we have got a windsor butter knife made by a company called grundberg sheffield england uh we've got two we had three of these one of them was used to make tea the other day i've sharpened one of them to the point where it's now able to shave hair on my arm and we've also got a blunt one here i don't know i could possibly use it as like a scraper or something at the end of it i don't know but we've got butter knives here and we're going to be using those as opposed to proper marking out equipment like a scalpel or a marking knife so that will certainly be interesting thirdly we have got we have finally got the amazon basics smoothing plane oh there you go we have current we finally got the amazon basic smoothing plane donated to us via viewer i tried to order one of these back in february i waited months for it and then they eventually canceled the order saying that we weren't getting them in so we finally got one it has the logo on it it's got the lovely plastic handles and the super stable blade and everything so very excited about that we're going to be trying to smooth it off afterwards we've then got the chisel set amazon basics once again um pretty comprehensive set to be honest what we've got we've got three quarter inch half inch and then quarter inch so that's actually quite good sizes there and then we've got a wider one here just in case we need to hack out something else the trouble i'm going to have with these is that they've got very large flat spots on the side so we're going to be tempting to dovetail this box and those flat spots are not going to make it very easy so we'll see how we work around that um marking gauge that was also included in this marking out set i've taken the time to sharpen the tip of this uh from a sort of conical pointed pin into a sort of knife point i suppose so the knife is now going sort of up like that and it slices a little bit easier that's the only modification i've made to it and is why we've got a few track marks down the side and in terms of sharpening we got this cheap old diamond stone uh it's only single sided and you can see i've been using this to sharpen the butter knife so far so we got that uh material we've already covered this but stabilized osb courtesy of james from hashtag woodworking on instagram and we've got some bits of padauk here see these are going to go together like that and then the knife is going to go inside it hopefully at the end of this video as for saws we have got professional quality made in germany uh i think this is there's two cherries it might actually be made by cursion i don't know but yeah we've got a a gent saw here i don't know if it's rip or cross cut but then again i don't know how much that applies when you're cutting osb so we'll have to see with that um as for rulers we somehow ended up with two of them um you know a rule is a ruler the great thing about these is oh it's not a great thing it's a pain in the arse actually but the measurements don't actually go all the way to the end rob was very careful to pick that out when he uh put it on the wish list i hate that about rulers so we've got that clamping we've got these to be honest these don't look that bad they they work they clamp depends if they can hold the pressure on up uh and then obviously for i have got my strop here uh just to remove burrs and stuff like that unfortunately i haven't really got a uh anything else to do so um but yeah so pretty much the only preparation i've done is on the marking gauge turning that into a knife point and i have um sharpened the butter knife other than that uh material is squared and that's about it to be honest that's all i've managed to do in this time so um i guess let's get stuck in some dovetailing we're going to do some marking out here first so firstly let's have a look get this all lined up now i haven't planned this out i don't know if i'm going to put tails on the osb or on here i'm going to put tails on the osb that'd be funny wouldn't it so let's get our baseline scratched in first marking gauge set to the thickness of one piece of material eh you go cool and then we'll scrub that down the ends of these i'll tell you if you've got a marking gauge like this turn it into a knife point on the end as opposed to a pin it cuts brilliantly apart from when you're trying to go across epoxy like this hashtags in the chat by the way hey awesome hello james people are asking about the lid and the base lid and the base haven't figured that out yet i think for the base i am just going to attach a thin bit of plywood uh and then the lid probably the same thing i'll just completely seal it and then whoever wins it um at the ends they it's their it's their responsibility breaking into it i don't think we'll go as far as attaching the base and all that in this video because i think dovetailing the four sides of this together will take long enough but we'll see we might smash through it pretty quickly you know as a standard with these live streams we never really know how they're going to go because most of the time instead of doing these q and a's now we decide to do something stupid and challenging like this you love it yeah i love having my friday evenings everyone else is probably sat home watching this you know nice and cozy on their sofa and here i am dovetailing osb together oh uh james taylor suggested an amazon cardboard base and top oh oh good show we've got enough of it yeah got the packing material as well that is brilliant amazing inlay those useless rulers is the laser base i could do i could do and that sounds pretty good too right we're all marked out let me just double check that so pins i'm going to make these the pins and these the tails we've got markings on all the sides yeah yep yep yep yep yeah yeah i'm making extra care this time because last week i started describing and cutting out the wrong joint so i don't want to do that again this week because it added at least half an hour onto last week's live stream right next pencil crap ruler let's start marking out these dovetails it's very zoomed in isn't it yeah they are to be closer yeah that's cool right so let's give myself six millimeters either side i think we can make a decent decent dovetail out of that we're going to do this all very systematically no rushing like last week just taking our time making sure i don't things up again are those amazon basics pencils no they are not they are from um they're from somewhere very cheap though i think it was poundland i'm gonna yeah they don't hold their lead very well right so i've i can either do this with a dovetail marker like this which is quite cool or i'll show you the the great thing about these sliding bevels look so when you lock them down and they're nice and secure when you then go to try and mark things out the that side's okay but if i flip it around this way the wing nut on the back starts interfering with it such a bad design i mean you can mess around with this flathead but like why yeah good old faithful good old faithful right this looks to be like a one in six maybe i don't i don't know what the recommended pitch for osb is to be honest i think we're trading in new water here mark the waste so in the comment section does everyone think i can do this or not you're asking me to check i'm just asking people for their if they have faith in me to be honest i guess yeah you could check see if you can get a general consensus okay that's my consensus good that's a solid start uh james solar said yes yes said no what the said kinda sophia said yes with gaps yes with gaps that's that's basically a no sofia i need a yes without gaps if you just have full faith in me serenity thinks you can do it warren says yeah andy joe andy joy yeah oh there's loads of yeses yes but they have far more faith than even i do amazing are the square's stuck tim says he's sure you'll have something at the end but not sure if you'll like it i think i will so i need to square these across the top now again all systematically doing this properly shall see if i can use the cat's moses guide with this saw yeah do it i've got an overlay this time yeah set no link in the description so nevermind am i still on camera for that yeah uh david cracknell says why not mark up one tail and then transfer to the rest i could have done that yeah i in my mind i thought i could have gang cut these i might actually do that for the uh for the others i was literally just thinking that save a bit of time i always forget about gangkong uh strength says you can't use the cat's moses guide that's cheating it's not a cheap tool fair point one said it's cheating as well yeah all right and tim scott yes that is green on the square because of a box it's flocking i think it's green flocking i think that's what they call it i can't remember sounds like it should be yeah right there we go i think yeah we can cut them i should have marked them out simultaneously as he said but yeah that'll work that'll work what is the plan for the finish on this beautiful work of art cockles uh the finish so far i think is probably just going to be dense from a hammer when i'm mashing it together i haven't figured out the finish yet um right i need to go to the vise okay let's go to the vise so it's going to do a cheeky transition for you let's get our face sighting edges sorted as well just so i know what's going on with it uh so that that that this face side there up up they're asking if it's an amazon basics advice no it's not i'm sorry guys i let you down uh right okay so make that i guess that could be a one one two a lot of people are saying cheating if you use that vice you've got the cheap clamps make use of them uh tim's suggesting to use via tool belt ruler as a lid i could do i wonder if i could why are you making me do this yeah stupid blooming channel right off we go think gang cuttings out the question [Laughter] ow what do you want me to do i'm going to start complaining that i've got a roof over my head now not have to do that go doing a gazebo that's too fancy just outside in the rain this is so stupid i'm sure people won't mind i'm just gonna have to pick them up we don't have enough cameras oh i wouldn't mind if i did that hmm i'm not sure if it's this saw that's bad or the fact i'm cutting stabilized osb but this feels like i'm using a hacksaw on a piece of really hard metal it's a weird feeling well maybe maybe the stabilizer is just that strong yeah sophia anderson is saying it's for floor amazon basics you should be hovering you shouldn't be using the floor so fear does bring up a very good point um tim says just make sure you describe how they feel when you use them how are you feeling with this vice this vice shut up um i don't know like i mean i think you can probably see how i'm experiencing it it's like it's just not a nice feeling i like the way it moves yeah it's modular it's like sort of if you took you're right i was just gonna say hashtag said that oh your box is amazon basically i think he's trying to suggest something they're family friendly i mean if you look at the shoes that basically might as well be by this point cutting through this is like going to a very pebbly beach with a rake and see if you can go find some 2x4 oh no sorry i missed this earlier i should have been honest oh no you can ignore that one well bob the builder was an icon you should get robbed to do this next week on thursday or friday streaming you can meet your feet and do not look just like um so that will be disclosed at the end of the video some people will have already entered others yeah others will need to show their allegiance it's all i'm saying course guys if you are oh i just hit the uh the clamp then if you're unable to stick around to the end this video will stay up live on the channel for a few days so um yeah if you have to leave early you can rewatch it later should you wish and you will still be able to enter the giveaway we'll open the window for about a week you guys are so bloody why this is painful let him use his vice i think the first bit of that sentence describes why he can't use that vice i just you can't clamp it there we go no right okay now i'm gonna try cuts directly on the lines no way stop chiseling back to these oh yeah i think we're on it again beautiful damn it oh yeah we did it matt says use a second clamp well i would do that but it's hard enough getting the first one on let alone get another one on i can just deal with it oh no that's didn't quite hit the line on that i'm gonna have to chisel that one oh boy oh no allegiance is that some kind of euphemism for something more sinister i mean i sent those pictures a while back you asked me to stop and told the police now i'm on a register that's tim scott by the way oh wow i should i should learn to read the whole thing before submitting fast register oh yeah what did i just lose then sure it's not important hey yeah it's part of the box should have clamped that closer to the piece you should use this i'm sure axmiss would love it right can i use the vice for the second one seeing as i have proven just just so we can move on with this bloody step [Music] i'm not sure if anyone can see that but you can anyway what the speed the resounding nose i'm seeing a few yeses you're seeing a few capital yeses too fair oh my god that was ridiculous god damn it guys well it's up to you it just depends whether you uh want to no because i'll never hear the end of it i'll i'll complete it at the end so quite a good standard they'll say no they did do it properly because you used you use the vice so here we are repeats next daily live stream with the quality tools then compare yeah i've already managed to smash my knuckle on something uh oh oh my back i should have bought in the uh the muscle roller that sarah bought me you could have done my back for me while i was uh i'm not looking after that please put some candle wax on that so my ears do the labels make the counts stronger i don't i haven't taken that off yet it's so annoying i always do i've still got labels on some of my um axminster clamps i think your please get steering my ocd in serves you right for making me use it come i on him these instead that he should try dovetailing no espy and he has not shied away i didn't see that comment i just thought it was a given that i'd have to try it on my side this is where a first aid kit would come in handy lucky one is on the way we have received it warren yeah thank you very much only wusses use first aid kits glad to know you think we all have such good voices that was sarah what was that saying goofy voices you clearly put on a voice for her come on get there we go oh that's a good lock that one this epoxy that says if you use the cheek bench you can use the vice mechanism on that ah the cheap bench is outside and it is currently soggy outside ah right bit of eye pro and we'll start doing a bit of chiseling here oh i haven't sharpened my chisels right hang on oh okay this would be a whole new adventure i might go there and do it ah right give my back a bit of a break where's my honey got there oh no this is gonna be a pain it doesn't fit it it does fit yeah but to use this honing guide accurately you either need a protrusion stop which i do have but it's for my lee nielsen honing guide or you can measure the uh the protrusion through from the front of the guide however the ruler doesn't stop at zero on the end does it i've got an idea what you've got two rulers measure the gap on the end and then just work out from there see if there's a reason why you're given two rulers in the grand scheme of things i hate you so much well let's go from the side so i don't block too many people oh yeah i can kind of get around it that'll do right oh wait no oh no oh i broke my screwdriver god damn it that fits so well though i was gonna say that just went straight in oh well which one are we on scott anderson said no honey guide free hand it's the cheap holding guide uh yeah greg miss uh greg which camera are we on by the way that one oh okay cut the end off a ruler silly with what i'm not allowed to use anything else oh it's metal do you want to flip to that camera yeah yeah i mean i just tried tightening it up with my wooden thing but i've just broken the end of it do i have to use cheap water [Music] cheap water what's that you have a club label master apparently oh okay right hang on i think you can use the word bugger as it's a family channel what do you mean the benches voice [Music] what do you mean i'm not not mistreating them you love them giving these apart from this screwdriver oh you knew that i don't like rules like that didn't you i mean i was very aware that it's a useless ruler for woodworking it's so annoying right okay it's not quite flat okay yeah there's some interesting uh high spots on this but then i don't know if it's the stone i wouldn't want to put the blame solely on the amazon basics chisels uh extra 71 said use water from the pit use water for the pit oh no right that'll do i think that sorry what was that what what the hell are you using there who said we're allowed to use this who me at the start gotta use a strop i mean it's done bugger all but right no three hands are for wusses rob hutton your latest message i'm going to decline it i'm afraid it's a bit much okay oh yes go on it chisels no way oh yeah don't even need the mallet i could just wow i'm impressed i mean it is osb stabilized stabilized osp okay i want to zoom out guys i'll tell you what as far as dovetails go not that bad they are not actually that bad these clamps however are crap just just look not everyone can afford the fancy fancy stuff for you yet no i know i know i but they are doing my nuts so be proud of a three pound 59 class i genuinely think that's how much they cost and they do clamp they're just like really awful on your hands they're quite narrow yeah like the the tommy bar at the bottom is just so that you don't get any leverage from it oh that's better is that an amazon basics like yeah is it amazon basics camera we could have done the whole thing on the camcorders i know you're suffering that this could honestly give people some valuable information yeah point it is anything is possible okay oh just did a dad sound then you did jesus was the carpenter but only matt hesley saves the dovetail i think he's comparing you to jesus and trying to suggest you're better than him oh sweet which is disturbing to say the least used to be my nickname in school didn't it i did as well as ugg the caveman matt keep deluding yourself that this will actually work welcome to the world ismir mortals live in next time we should fill your workshop with junk and give you exactly one square foot to work in did you get that with a bad grammar something about being in a small workshop uh i'll read it out over here matt keep deluding yourself if this will actually work welcome to the world us mere mortals living next time we should fill your workshop with junk and give you exactly one square foot to work that was tim that'd be like a mr b style video wouldn't it it's like instead of last one to leave the circle it's like complete the project before leaving the circle i've just got to have everything within arm's reach well whatever tool to grab something in arm's reach yeah that's contraption so i keep my work my workshop laid out as is yeah let's get loads of litter pickers oh no dan palmer says if he's jesus rob should wash his feet while he does this oh no oh i did i do have cheesy feet the only valuable information never leave rob alone for a long period so this kind of thing happens i know that from experience anyway i'm stupid just to think that this might be different i know better than this right tails are done nice well done thank you where you going now i mean not they're pretty good they look right to me yeah pretty good so i'm gonna go well i would have loved to have gone to the vice but i'm not allowed to i've got to somehow scribe these onto the uh onto the other ones then i wonder if i could make some sort of like if i could just clamp it like that no that's not going to work because if i put pressure there it's just going to break it i might have to go to the front of the bench again yeah we're going to the front wait no that's not going to work either um hang on let me think i need to be able to get a clamp sideways like this thank you ben thank you ben uh okay that ain't gonna work because i need to get that down i think i'm going to do it on top like this it's just going to be a little bit precarious [Music] how did you find your workshop help from amazon basics my workshop what elf robin's calling me an elf it seems it i feel like that's a christmas live stream dress up waiting to happen okay so let's see two and where was that other bit that i dropped there i think i figured it out let's go like that like that and then if i clamp it with any luck down the hither onto the top get it all lined up oh dear i can't believe that worked there we go matt stop writing numbers on your hand you do you even butter knife time no way oh we're missing it oh trouble is i can't quite get into the into the corner because there isn't a point on this knife don't know what you're going to do there there is a bit there that i could possibly use it's a little bit more acute stupid blooming live stream uh people are saying to mark it out with a chisel could do actually yeah but i i really want to use the marking knife the marking knife the butter knife just to see how i can actually do it i wouldn't have wanted people to waste their money purchasing us a butter knife and then may not use it i think that's a very valid point because butternuts are in short supply yeah and also i did take the time to sharpen this to a point where it can um shave hairs off your arm i mean that's impressive in itself right let's have a look that's pretty good i'll just extend them we'll take that yeah we will take that um now where's my square where is my square oh no oh there buried it right and with any luck i'm just going to go through this one and then we'll see if it's i'm going to have to pencil that you know what this this small stuff is very difficult to actually get a good angle there we go right first one marked out alpha go back here now uh okay so we've gone two let's do numero one now one one that's four i think that's a one that'll make sense let's get it clamped this way instead [Music] you don't get quality viewing like this on rob gosman's live streams uh did you check if the square is actually square no it's faithful you gotta have faith okay oh there we go this is actually a bit easier than i thought i mean we'll see how accurate they are at the end but what tool do you hate the most so far clamp let's do my nutting matt stop messing with the malice and use the box on the table that you got the faithful stuff in i could do actually yeah yeah i suppose that would be that'd be good it's just it's just the same as resting on this isn't it i've been called a mischievous dobby instead of an hour mischievous dobby you're a bit dobby like not to put any pressure on you matt but there are over 600 people watching what yeah 600 yeah why'd you do this with your friday evenings make sure to like the video sorry livestream we're live we are live okay right um yeah i think the reason i couldn't use this is because it's a little bit too low yeah that'd be problematic it wouldn't clamp properly whereas the mallet is slightly higher meaning it's a better angle of attack uh right three three three there it is the faithful engineering squares are very good though faithful engineering squares are good they can sometimes be out of square but you just return them if they are and you wait until you get a good set but yeah very good value for money you just swiss like your swiss think engineer squares are very good from faithful would gimange agree rob uh yes yeah yeah it's your mind [Music] glorious friday night people so who else is sending matt socks then [Music] dobby will be free as long as it's not worn ones last one and then we'll start cutting out sockets and then i've still got to figure out how i'm going to chisel out the waist to be honest i think i've got an idea andrew's asking him to check that's a butter knife yes andrew this is a butter knife a sharpened butter knife may i add i think it's the first time i've actually ever wielded a butter knife as well i'd say i certainly haven't no i've seriously used a knife specifically for butter i'm sure it spreads well three now well yeah i suppose maybe maybe that's all they've been selling all this time it's just people trying for marking knives and they thought oh we've got something great people love butter but no it's woodworkers i'm sure you could resonate with this though like why have a knife to spread butter when you can just have a ladle a ladle a ladle what to throw away put it in the bin because butter is disgusting no to put extra butter on things you're a baller no i'm not butter is good that's the real crime in this workshop you can use the saw to cut out as much waste as you can as a cat that's the idea that's what i had floating around in mirrored i just don't want to use the saw to be honest but there we go this is a great use of my friday during work yeah mine too in a similar boat here right we're all marked out i think we're good uh let me just double check that one all the numbers are rubbing out four i think that's a four yeah it looks like a four i see where this is going not again okay i might just cut on this side to be honest oh wait no i need the i need the thingies doggies struggle it's i'm afraid i will need to use the vice i have proven that i can do it but look sorry wait why what's the proof here well look what if i clamp it i guess no it sounds like you're learning i guess i could clamp it off at an angle like that and cut down like this yes all right look i'm just the voice of the people yeah i figured that they'd say the same there's no point arguing now cool so this puts out all the muscle memory i've put into training uh sorry yeah all the training i've put into muscle memory cutting plumb because we're no longer doing that i've lost my saw uh oh it's in front of me clever right oh this is disgusting right okay i need this i like the bass face a space i like the buttery biscuit face all right greg i don't know what's needed thank you very much foggy thank you foggy sorry i'll get you guys a better man luscious i think it's the word you're looking for i'll tell you what i should do this more often they're actually quite plumb uh says why are you taking so long i'm on my third box already now i'm assuming that that's someone changing their name i would assume i did actually have it on a previous live stream where a famous woodworker re-watched it and then gave me um some pointers on my lee nielsen honing guide yeah david charlesworth for those of you that don't know him i reference him quite a lot in my tutorials he ended up watching one of my live streams oh no i can't get in there sorry you're not on brewdog time after this oh yeah hey you haven't earned it well i've got them [Laughter] oh no that's nowhere near plum since you can't use a coping saw to remove waste [Music] yeah smash it out with a chisel as far as i'm aware how's the saw um it's like trying to cut play-doh okay but like obviously the wood isn't play-doh the wood is still wood it's like trying to cut wood with play-doh in fact if any of you have children get them to make you a saw out of play-doh and have a go with it it's basically what i feel like i'm working with there oh this is just oh how did you end up on the other side jesus she's been skiving off all day you can't even point the camera right good job i don't pay you there you go there's a bit lost a bit gone good right well that's one side done oh oh deary me epoxy this says clamp it to the box straight and then clamp the box to the table i don't know what that means but not a bad idea not a bad idea you might be on to something epoxy next i've still got the same problem oh wait no because i might be able to tilt it slightly more on here i'm going to keep the labels on just because i know it triggers everyone [Music] who would win in a fight between you and paul sellers me [Music] we could get on the uh the youtuber boxing match hype oh yeah epoxy this you are a genius [Music] i just wish you thought of it earlier oh the speed [Music] [Music] oh [Laughter] [Laughter] uh nice nice so while matt unclamps that i'm going to shout into his chest because my lapel mic doesn't work there are over 675 of you currently watching and less than 200 likes what are you doing what are they doing i don't know they must be sitting at home twiddling their thumbs just taking this entertainment for free and not giving us a cheeky thump i mean yeah i couldn't have said it better myself right so now we're going to start hacking out the waste firstly i need to sharpen my quarter inch chisel using my honing guide i believe you dropped it i dropped it didn't i yeah there it is hate these rulers so much why they measure for you that's all you ask of a ruler bad workman yeah good job i've got a nice flathead screwdriver ow is that how you did it last time i just stabbed my finger with it there's definitely a splinter embedded in my finger now we've got a first aid fit oh right we're not using that [Music] there we go this is all just our way of helping you appreciate the tools you've got yeah thanks guys i knew there was a reason you're doing it i'm going to use the the non-sharp butter knife to tighten the honing guide because that seems like a good idea i think i've just undone it by accident no that's good james taylor says use a ruler as a screwdriver it's actually very thin and flimsy there's no rigidity to it i whatsoever that was less than a pound that's not a chance if i hold it there maybe no no it's a butter knife jobby that unfortunately right i'm not even giving myself a spray bottle although i do need this jason you i used to have a stone this big really yeah i used to have a diamond stone that was this i i didn't look at the size correctly when i used to when i used it i thought it was a full-sized diamond stone i thought oh i was weaker value funny i did expect that when i bought it on amazon yeah well when i put it on the amazon wishlist i mean what was that that was the square that i'm sure it'll stay square after it dropped that's full i did that playing raw for not reading it out to you long ah that's about the box and the setup i clearly missed this message i appreciate the thought epoxy this right that'll be that'll do it's going to start hacking now this might be noisy guys but we've got to get the job and done the builder style yes i know there's like a v-groove technique for this and all that we're not going to bother we're just going to fire it out in random directions and see what happens uh serenity's having cheating you're using a hammer i disclosed that at the start i can't use this one it doesn't drive the chisel effectively well we haven't seen that see he got some great i'd have better luck using a butter knife i don't think matt's ever resharpened a saw have you uh i have tried once and it turned out okay but it wasn't brilliant hence why you haven't seen a tutorial on it yet i'll tell you what guys yeah tell you what this is looking good should we have a look oh go on show me the which wait wait wait wait wait don't be crazy i think this is one that's two three okay there's a little bit more clear out but i mean how about that it holds e there we go right what needs clearing out of that i see that i see the problem uh right let's get a clamp here how are the chisels um i mean i'm using them for brute force at the moment i have folded the edge round on this one it's not too bad though not too bad um the the main problem with these is holding them down the bottom like that that's how i like doing it and you get like really bad thumb cramp here um due to the weight on the top that's why it's quite nice having a sort of smaller lightweight handle but i mean other than that they're pretty much the same as like stanley fat max chisels and all that to be honest 700 people are watching you matt 700 great yeah and only 234 likes that is disgraceful that is very disgraceful that is disgraceful guys oh no it's gone below 700. right hopefully this assembled dovetail will make everyone like the video would you recommend the chisels would i recommend the chisels um no to be honest i wouldn't recommend any chisel this style for woodworking get yourself a narex one or something there we go uno assembled dovetailer uno that's i mean i'm impressed yeah and i'm not usually dressed there you go hey oh oh there you go three more to go five past seven hey we've only been going an hour that's quite good going yeah i'm so happy that fits especially that well don't buy my knives guys buy these butter knives butter knife cheaper cheaper cheaper and shinier stainless steel butter knife with a mirror finish uh james taylor says that's a lot better than the potato box the potato box was acceptable but i would agree we have we have made some progress over the past few years i think the potato box is definitely a lot tastier though yeah yeah it tasted really good did you actually eat it yeah yeah cooked at the end of the video and everything uh see i didn't bother watching it looked quite cool actually oh no i split out the front i was a bit over to overzealous with that one i'm afraid that is the outside face [Laughter] is that the chip there which chisels would you recommend three quarter half inch quarter inch [Music] are you jealous of viewing fingers of you playing two notes four times in a row repeatedly you're not wrong rob you're just very nasty that hurt again i'm gutted i broke out the front i'll slow down on the next one it is looking good so far but i cannot wait to see you use the plane on the osb oh don't even remind me okay what's that that's number two knives all right it's a little bit tight finally got a second to join the live sesh baby crying cheers nice don't know why baby crying comes into it but you know guys don't copy this chiseling towards your hands it's very silly but seeing as i'm not allowed to clamp things effectively oh come on that's got going there we go she going she going since september hater of the month a complimentary butter knife good old carl nice right one side done okay so let's not be so stupid with the next one let's clamp it down that would be a start there's no rush we just slowed down we had more viewers playing minecraft maybe you should give it all up for a gaming channel i mean the woodworking question mark i feel like it would be less mentally exhausting than this actually yeah minecraft was painful the repetitive deaths yeah shhh oh let's do that side as well warrior i don't like how that bit split out we're all good nope careful [Laughter] how do i get this matt and robert would you like to join my minecraft realm it would lose all of its innocence it would be so furious [Laughter] when uh when we get babinga boys off the ground again i think that's certainly an offer we must take up okay here's the idea every guest that comes on on the podcast when that goes has to also be on an episode of finger boys whether or not they played minecraft good i like that hey oh goodness why don't you cut the tails in on both ends first with the chisel and then start taking off wood might prevent tear out at the front chiseling in at one end that's what i did i was flipping it around each time i just it broke out um unexpectedly on this one for some reason but we'll take it so that's them cut out with 16 million chickens i feel like hashtags are serious about this yeah i think he knows what he's doing what if his dream oh he could be i reckon so okay that side seems to be good this side is not let's just clamp it like that [Music] next challenge dovetail box made from bermuda uh i think james is currently experimenting with that at the moment so hold your horses it might happen i've completely forgotten about sending but sending the dreamy stuff so what the picture i just took get out right okay oh actually that looks a bit skewer as well so nice right let's see if he's fit now so what's that that's four and i've cut the number off that side good that'd be three ah right four let's try four to start with let's copy this one yep falls in to prove a point scott in the chat has 170 year old hand chisels so if you buy a good set that's how long they can last they become heirloom pieces even amazon basics did say a good set that's a tight fit you got there that is yeah i'm gonna um i'm going to relieve that slightly you can see where it needs to be taken off right 700 of you roughly let's get a few more likes 37 more we hit 300. what's our maximum light count i think it must have been like 400 or something yeah yeah 400 i think so i thought the world needed to see the bald spot yeah i put it on the fan club frank sent commented and said can you shave it with the butter knife and make it a little bit bigger oh is that because schrennick's bald spot's bigger than mine is he is he jealous i've got more hair yeah ah that's it i think tate's the same you know i think he's already balding or balls this bald spot is his head sophia anderson is watching this while her class reads shakespeare nice sofia i commend you that is brilliant [Laughter] wouldn't it be funny if her whole class had phones in their books and they were watching it as well but she should be able to push up the numbers just put yeah sophia get him to like right that's it should i just do that i think that's the whole thing now i think that's it i've been leaning on a chip right let's see that's leaning on a sharp chip oh here we go move that knife out of the way it's a butter knife my corona two one there you go you're amazed if that's gone together screw the haters i can't believe you managed to make use of a mallet as well like so with the with the blade gone that'll be one beautifully funny sized it right beautiful actually if i thought forward about it the person who received this probably would have liked to keep the blade in it when they stored it in the box oh i'm sorry whoever wins this afterwards but i'm afraid it does not fit it's like two millimeters too long i'm doing enough scratching down the side oh hang on no the box is out squarely there you go it fits that way i'll tell you what now what you could do they'll love this where's my square oh i dropped it didn't i even dab yep you can't have your knife rolling around in the box oh very good it's a picture this is a feature yeah come on it's gotta stay nice and secure in there where's my saw there this is daily with matt where is my this where is my van uh no one puts effort into their packaging like i do a little bit longer a little bit longer yeah it won't quite cut the box enough but i could always say like get a rasp yeah yeah that'd be quite good so lock both ends in we'll do that i don't know what i've got to uh i guess i could just chisel across that'd be quite nice uh right i'm gonna do this let's see if we get a clamp in here there's the midpoint probably around there so if we go 10 mil either side cool thank you sarah uh woodwork learning made a much better suggestion if you wanted to stop doing that and that's a bit late but he said remove a bit of a handle how dare you say that about my osb marking knife uh mike donaldson is from the us and he loves your accent oh yeah there you go yeah i've heard that before in my past tutorials maybe not so much nowadays because it's it's a bit less serious to them but the accent gives people faith that i know what i'm talking about apparently oh really yeah yeah at least from an american's point of view i'm just another blabbering brits of the other brits do you still recommend provided bevel edge chisels yes that would be my go-to option or narex instead of something like this because they come down to fine points on the edges these do not don't break this down please look how sharp my chisels are i think i'm going to make it a bit longer than that yeah let's go a bit deeper just to be sure oh oh come on thank you oh still got the label on this clamp by the way guys just just in case you wanted to know oh [Music] is it time to tell us how to win this work of amazon basics out also don't forget to add the amazon smile to the box good idea it's got to be at the end that's when you find out how to get all of it yeah right at the end because you might not want it uh sarah was saying but uh at the end could you give a breakdown of what was good bad with each of these tools oh a bit of education yeah i think that would be great bit of education what i love about these clamps is the thought of throwing them away at the end of this i won't let you yeah i suppose you wouldn't want to be able to use the nice ones for your student series would you no yeah hey you bought these tools they're yours you're not allowed to choose mine i think i'm gonna be investing in some tools uh we just passed 300 likes nice keep going peeps or save your life for when this knife fits in about t-minus two minutes uh chris blodgett said will we see 800 watching someday once upon a time we had 917. that was on the dovetail demo right yeah just after lockdown yep so we're aiming for a thousand yeah so if everyone could just share it put it on your instagram story whatever that'd be lovely and don't forget to tell everyone what you learned tonight you know it's been a very important lesson for everyone uh mike farren said uh are you keeping the label on so you can return it some would say right it's not pretty oh i've just chiseled the clamp there oh yeah is it going to support itself oh no it won't support itself but when it's flat that will no longer roll around in there it just drops in from the top and it can't go anywhere right i'm going free now for a moment where are you your focus nice just about locks in if it tilts forward it can oh no no no no that's in that is in how about that catch me outside you sound like you're already regretting what you just said yep yes i did right so i need to add a base to this um i don't know whether to add a base to it now the trouble is guys planing it flush i need to glue it first or else i'm just going to rip it apart but we can wait if i can get it if i'm allowed to get it in the main vise yeah i will be able to plane it but unfortunately clamping at the bottom like this is going to cause too much skewing action and it's just going to rip these parts aside if i can get it in the vise however i can clamp the uprights and do it that way so you know it's up to you guys it's up to you guys i'm allowed to use the voice i will use the number four in the meantime i'll get it sharpens just a just a teasual they're allowing it yes wait dab i was hoping oh trying to call it bluff right okay let me get it sharpened uh okay so let's see ch plane projection we want 38 millimeters on this people are saying you should be free-handing the blade no i'm using a cheap honing guide this costs seven pounds it is the cheapest you will find really well you could get cheaper i suppose but wait what guide is that it's not the lee nielsen oh so it's like very similar similar right okay fair enough yeah no it's not lee nielsen hey lee nielsen cheap let's put a curve on it because that's going to make a difference oh my lord wow good right i love how the butter knife is coming it's quite nice and ergonomic actually as flat as you'd expect it's hitting here here and here you got some work to do i'm not gonna do this properly i'll just do it thereabouts oh actually no wait let's just do the old ruler trick i don't have a wait no i do have a six inch ruler uh mike donaldson the gift registry address on amazon assuming you clicked the amazon wishlist is still good yes ruler trick everyone everyone loves the ruler trick there we go boom i don't think that's even hit the edge properly not even the ruler trick oh no it has that's fine cool right done that strap off i can't wait for dinner tonight just saying [Laughter] oh yeah right okay well let's let's try to set up this plane shall we okay i'll go in there back we go so yeah this plane's interesting and it doesn't have a normal thrust wheel it's got these two uh adjusters instead which basically throws every plane adjustment thing that you can possibly do on a normal plane out the window i'm not really sure how to set these up effectively i think you've just got to kind of wing it it's like a spokeshave as adjustment as opposed to a singular thrust wheel main problem with this being you can't move the blade like in one uh you can't move it evenly in one pass i mean i guess that might work but yeah anyway amazon basics can we can you see yeah yeah nice so i mean i guess let's chuck that on there um rob would you mind getting me like a piece of wood or something just a piece that looks relatively flat that i can test this parcel please meanwhile i will get some candle wax because your swiss munch think i civil play need this thank you flashbacks oh yeah oh that's gonna trigger everyone oh right let's chuck some out on the bottom first [Music] cheers ben i went to adjust it with a thruster wheel then so wait what okay so i guess let's just bring it out till we can see oh there it is blimey that was a quick adjustment you shouldn't try shaving doggy's beard with that blade oh wait he's not reached puberty yet oh so true thank you rob thank you i love having rob here look it's not my fault matt employs 12 year olds to work on his channel oh that's turned back on me a little bit right i need to go to the vice now i do yeah no because i'm allowed to use the vice i've got the old clear that has shaved my head my arms so nicely i was going to say that yeah it looked good on screen that is a very clean shave i'm so glad i get to use the vice sub these off volley so uh okay i don't think this is cutting yet no now i guess the key is to make use of the fact i've got a curve on it okay we're already cutting there okay yes thank you tim right so we're way too heavy that side bring that out bring that back in the main problem with this is going to be that i don't think the bottom of this plane is going to be flat to have more faith but it is sharp don't put it flat on the bench you can't do that that's fine god's given us the all clear now there we go right so we got shave in there yeah we're pretty even so just a little even twist oh it's a bit weird though it's like it's like that's what's happening so the tracks on the bottom of this are engaging on the corner of the wood so like i can't it's like tracking in a direction that i i find it hard to adjust it's like i'm pushing quite hard sideways at the moment yeah yeah yeah yeah it's like just pushing in one direction for me can you flatten the base of the plane yeah you can flatten it it just takes bloody ages oh my god you scared me so much then when you did that what like you swept obviously you were going the opposite way yeah uh okay right well i think that's osb time then in it yeah good right i'm sorry box oh no it doesn't quite fit okay so let's just make sure all bottomed out nicely supported i'm gonna do this nice and gently thank you warren okay this this this is working i think or a flex in the ic as you go over it the what flex in the osb as you're going oh yeah i'll try to keep it localized here yeah oh we're flush no we're not not quite oh we are hitting our hitting end grain though there is no gaps in that no way there is actually no gaps in it what should i put glue on it first i want to fill the gaps of the glue well no i'm more thinking like if i take that apart it might not be perfectly flush now i'll be fine it'll be fine it's never gonna look perfect well actually i'll say that it actually is looking quite perfect so i hate to say sorry guys not that i'm smug or anything but [Music] [Music] no gaps has yes petition to start uh rob's facial hair instagram profile it was it's been already suggested [Laughter] get away from me take a selfie instead you you hairless being there's roughly 750 of you watching that's pushing up another 70 likes let's get a 400 likes come on look what i've done for you tonight and we're not even finished right he's looking a little bit skewy there but it's fine it's fine right do we have a macro lens anywhere um we've got mine i can yeah i can swap it over in just a moment if you want yeah um sorry i've just got to address someone in the comments yeah velaz eg smith said stop whining for likes so please please can we have another 50 likes i got 20 but it clearly worked who said that i can't remember sounds about right i'm sorry but likes are one of the ways we continue these videos so oh wait this is this is a macro anyway yeah it's a zoom lens right yeah yeah likes are not just some sort of like intrinsic reward for us they do actually equate to better rankings on youtube thus better viewing thus better income so as much as you would like to resist the urge to like do it yeah that's fine i'm doing a little bit of clear up here just tearing out a bit but it's on it we're there tell you what though it's not cutting too badly he says while getting hideous tear out that's just for producing i'm just plaining against the grain that's why actually i could probably go off the end of that because i am clear of the end grain a bit it's a bit risky oh get a bit of movement in that vice yeah should be right yeah not too bad right are we going to that one we are and i do have to apologize for the mess of the workshop because you might have you swapped oh yeah good point all right there you go yeah so that one that one's not too good he's quite happy with this one and yeah so we've got a little bit of tear out on the end that needs a bit of mushing in that didn't go too well but how about that thank you sarah much appreciated thank you sarah osb dovetails and her duke right i bet harry's shave club won't be asking you to advertise their product full time on you channel now i'm mad nice oh has that come through twice won't be asking you to advertise their product full time on your channel now matt sorry about that uh mark brewer i'm afraid that that is very nice that's very cool yeah uh afraid i'm gonna have to decline your comment to be read out we're trying to keep this pg so yeah i think i won't add a bottom to it in this live stream just because that'll take ages basically the only thing i'm going to do is just stick a bit of plywood there stick a bit of plywood there and then send it off as some sealed sarcophagus to the person who is lucky enough to receive it so details of competition i guess wait what happened to the lid in the base that's what i was just saying about i think doing that now i haven't got any plywood and stuff set aside for it i need some thin stuff oh it's blurry i don't think i've got any so yeah i mean i could do i'm just worried about rambling on a bit and to be honest no no i reckon you could yeah yeah i mean it doesn't take that long to make a base if you've got the wood let's see if i've got something if you've got it's a bit thicker that's open but we can go for it let's use that back of the material for the back of the cabinet it's part of the free school do amazon basics do a plunge saw oh dear would you really trust that thank you thank you okay let's cut that off there then we'll just miter bond it to the bottom i guess now cutting this out is going to be interesting so i've only got this i reckon i could score it and then snap it yeah no i don't know i might be able to doing the old plasterboard trick yeah those transferable skills though i could also uh sharpen some teeth into my baker's scraper there you go and just just do that right sorry bertha but the people wanted it actually throw out the bronze lionel said mattie has a new toy don't need any of that lena or some rubbish i'm not actually going into the bench yet i'm working to the middle yes i know i could get two clamps on it but that would involve using another one of these god forsaken clamps we're almost at 400 likes now nice is that pencil just falling through the middle again yes yes my lid yeah you knock it and you say oh the lead doesn't stay very well i'm sorry but a good old stadler would have lasted oh i hit bertha sorry bertha right robbie is a perfect advert for harry's shade club people will think their razors are amazing because of his hairless chin i love this guy that's multiple people now uh rob harvey bald chin started following me yes brilliant thank you guys take the heat off me how does it feel rob first all right what if that account got more followers than yours well it will do actually confidently will do this is the queen of england matt this catch up with you cheers week yeah see you then zoom cool yeah yep love doing them with the queen she's got a right potty mouth scraper could do this put pressure in the right area or just whack it thank you baker scraper in fact i'll just go in with a corner yes do you know luke town townsend i know the name valley is your window cleaner yes i know luke blacksmith well not my window cleaner my mum's window cleaner i guarantee your windows has never been cleaned up that'll be the inside oh no that'll be the inside there you go right buff done beautifully where's the miter bond i've got one i've got that there yeah i've got it you got the activator yeah oh sweet you got the lot nice so let's have the other one on there just swiss thank you rightio i should probably make a bunch of shavings to fill this with first gotta have that knife nicely supported in there thank god for tracks in the bottom of planes my girlfriend mike matt what are you currently doing sarah sarah's asking oh i'm making a bunch of shavings to fill the box out and sort of pack it a bit see i can't um i can't send it with a knife in how much nando's does one have to buy for dibs on elixir is that tom i don't know oh donny's already got a knife i think he wants another one right and he's getting instruction manual i need an allen key uno memento um rob behind you there's a bag of black allen keys could you joshua get one for me civil pool uh yeah thank you i'm lost i think they're in a clear background there somewhere bit greasy did you tape it up no i think that's probably just an unopened one there's a an open one over there oh just going out merci beaucoup first comment i see bob's so short oh that's the one rightio so popular shavings very nice garnish unfortunately i cannot sell them with blades in due to the fact that people may be underage nice so it is just a handle avec allen key in you go that goes in there like that tuck the allen key at the side this goes in shall we wait till that booty there we go instruction manual on top [Music] still didn't answer your costume um uh i i do like nando's but unfortunately donny there are a lot of people waiting for lignan marking nice matty going to sign inside it oh i should do shouldn't i oh bam none of these pens work wait my unicorn pen works what do i sign uh lots of love uh i made this for you especially for you uh i'll just do the back of this congrats to the winner of this el mar [Music] they meant unbelief wait what are you writing congrats to the winner of this el marking knife aruno civil plates paul favor poulet but i'll sign the lid as well i guess i think my miter bomb might have dried up oh wait no do you have a lid yeah i got this one here it's beautiful oh just might have bonded my finger oops right go sealed forget never to be seen again i think they meant the inside of the lid yeah i'll do it i'll do the outside of the lid just gotta oh it feels weighty yeah i like it i've gotta have a fear wow yeah holy moly that's good isn't it right every box now has to be osb i think someone was asking earlier is that my product no no this isn't your paducah no i'm not actually sure it's even padauk it doesn't look coarse enough it's just red yeah but it's not quite babinga either so no it's not your paduk that would have been funny though um yeah i'm surprised you haven't i don't know the only thing i've got is a luminous green sharpie is that okay i mean if it's the only thing you've got all right what that's not that wasn't too bad that one yeah that's quite bad actually it's a bit bit yeah there you go uh i won't put heart on it right so now i guess just playing the outsides down and that is one package ready to go worldwide i guess to whoever happens to win it imagine the postage oh i don't mind the i've basically got a pay postage for this with the standard marking knives anyway because they don't class as a large letter they look they classed as a small parcel just really annoying uh the rules for the giveaway will be when matt finishes this box very soon how long did it take you to sharpen that blade man uh about what a minute yeah it's about a minute about a minute on really dodgy uh sharpening too yep using a honing guide may i add a very cheap one uh design and mate says how do you get into the box without destroying it you don't you must sacrifice the lid and the base or just the lid i would recommend bandsawing it in half uh chris the plane was about 26 pounds but i'm not sure if anyone would recommend it no it looks like it's doing the job but that's because i'm planing weetabix uh luke town uh i'll give you mix rates to clean your shop window my shop windows are beautiful thank you luke yeah oh uh says why aren't you using the mini plane i should do really let me um break off this rubbish and i will finish it up with the mini plane kieran that was a great shout out marcus maximus said this is like watching a really crap episode of blue pizza i think that's a compliment it is yeah it's pretty damn good yeah at least it used to be when we watched it yeah right let's try this mini plane oh okay here we go mini plane time should i give it a sharpen let's see how it goes first you've got to use it out of the box this is not cutting nope hang on let me let me get up close i reckon we can make this work yeah yeah that's it let's just freehand it beautiful now i'd better complain about the steadness of this video can't remember when that used to happen oh wow look at that flatness though oh damn that is exactly what you want in a blade that's actually quite good and it feels sharp hang on here we go we suddenly got serious can you shave with a faith little faithless thumbling yes you can so there you go a few came off it wasn't great but you can guys genuinely most of the uh the thing that's mainly saving these um planes in terms of sharpness is this dropping paste i've got it is so good it's on my kit profile if you want to buy it oh i see this whole thing was a cell hashtag plug there it is seriously who would use this you are oh yeah it's made for you this is so aggravatingly small apologies if any donations have come through i can't accept them there we go i love how that's become the good place yeah i know there we go one sarcophagus complete nice nice so so so give me a moment to deal with all this enjoy the view of the voice yeah there you go so i hope everyone has enjoyed watching me make this to start with i can't believe we got this far are you gonna finish it i could do couldn't i i'll finish it afterwards i finished it afterwards but yeah i'll put some sort of finish on it probably wax or something so how can you go about winning this osb marking knife avec box looks like an ice cream sandwich mat it does it does it really does yeah i love ice cream sandwiches sorry there we go okay so sorry we'll get through these first this is the queen again it's not easy to come up with these witty comments you should really play them yes but i'm trying to keep it pg and what you said was wrong okay so winning this box earlier on in the year before the coronavirus outbreak cancelled maker central i made a pledge to everyone who joined the osb army and i said that if you did so you would get an osb marking knife and unfortunately the the final count whatever it was the grand reveal of the winners of that was going to be at maker central but obviously maker central got cancelled and it took me long enough to make these knives anyway because you know james howard was kind enough to make him one and so we are going to run that competition again but for real this time and so if you join the osb army in the next what do we say a week or so week yeah in the next week you will be entered with a chance of winning the osb marking knife avec box if you have previously joined the osb army what do you mean matt by joining osb army you need to get to the osb army uniform that is so the osb top t-shirt hoodie sweatshirt whatever if you've already purchased it earlier on the year either to enter that competition or just because you wanted to join it then you have already got one entry to it one entry per item of clothing that is but if you haven't already and you want to win get a chance of winning this then join the osb army in the next week we're going to call this conscription an incentive to join so if you pledge your love for osb wish i'd hope if you want to win this you should you should have an allegiance towards osb then join the osb army join the osb army all right so that cover it all yeah yeah awesome so that will go if go on my website mattisly.com forward slash shop or something like that there's t-shirts hoodies sweatshirts uh there's an os beanie on there as well any osb item of clothing will get you a chance of of entering this competition and potentially winning this marking knife and i will ship worldwide i will ship worldwide as well australia moon i don't mind wherever all right cool so do we have any questions at all no questions right now i'm sure they'll come in in the meantime i'll just get sanding off these edges so i don't stab any posty in the hands thank you for teaching us all of these [Music] how to use a router plane router plane have a look at my old tutorials on cutting a tea harving joint and a cross-halving joint sorry just the cross-halving joint i use it in there it's a great tool uh can i just do a quick throwback to when sarah asked for you to do a little bit of a review of the tools at the end oh good shout out good shout out okay hang on let me just do these bottom edges or else i will forget there we go uno sarcophagus aruno so right what was it tools that i liked and tools that i did not like yeah well no positives and negatives of each tool positives and negatives okay so and every single one has to have a positive yeah okay but it's related to woodworking before you say about throwing it away that's gonna say it's shiny right butter knife to start with what did i like about this um i liked the the shape on the end of it it allowed me to get back into the corner of the tail a little bit easier that was quite good um and i like the fact it doubled up as a screwdriver when my primary one broke what do i not like about it it's not very sharp out the box you've got to sharpen it there you go marking what do i like about it the fact i sharpened it and made it usable what do i not like about it it's not a veritas one wow so it works in every other way it's just the brands that you didn't like they're okay to be honest they do work absolutely fine um it's just they're not as comfortable to use i guess and i'm a snob the square what do i like about it uh i like the wood what do i not like about it it's not an engineer's square so it's only guaranteed to be square on the inside the outside edges of wood and tri-squares are not guaranteed to be square oh yeah is that because it's got the metal bit on the inside yeah because wood can expand and contract unevenly oh of course yeah yeah i know stupid didn't it like you wanted to square want to square down that side no not happening you can chip you can do that though i think the square's out yeah i i would have thought so yeah sliding bevel what do i like about it it's very nice and small and handy what do i not like about it that bloody wingnut the the baker's scraper what do i like about it um it was great for splitting that bit of plywood in half what do i not like about it basically everything else the the tool belt what do i like about it it matches the branding what do i not like about it the screwdriver that left a splinter in my hand i like that one the most the clamps what do i like about them um they clap they did clamp it's not like they failed to clap yeah what do i not like about them um just the adjustment to be honest like that tommy bar is awkward to use but it works i mean i'll certainly use them at some point for something probably like filling up a bin or something um the little thumb plane oh man did you somehow get three green osb ones out of those blanks you should do a similar idea for the bell vita ones open to anyone who has sent you bell vita oh yeah we're going to do a separate giveaway for the um for the green ones up here as well but this is for the primary osb marking knife the first one ever made um what else what some plane what do i like about it it looks cool what do i not like about it basically everything it's after the watershed somewhere in the world just play all the donations sorry i didn't know what my last word was i couldn't hear it so rob said i should play the message out so i did it was just the last word i didn't want anyone to hear oh i see so it's something i couldn't have heard um the saw what do i like about it um the cherries printed on the hand the blade would not look like that the fact it doesn't cut new t-shirts coming out this week so that i can get them with the osb shirts oh i could do that i could do that i did get them all resized all sorted all sorted yeah was that from the instagram story of your cupboards being full of black was that like extra shirts you bought my oven i guess it was every one that you were adjusted yeah did you double up on everything uh i didn't double up on everything it was just the ones yeah um honing guide i like this nothing i don't like about it apart from the fact it hasn't got lee nilsson on it the plane um what do i like about it the blade was quite easy to sharpen i guess what do i not like about it the tracks on the bottom of it that forced me to travel in a singular direction i guess so there's that sharpening stone what do i like about it stay portable quite portable i used it to um sharpen the the marking gauge i'll tell you what i'm impressed with that shirt far more than i it's quite good it is quite good compare paired with a strop as well very good um the rulers i was just going to bend it and break it then i think we might end up with a piece of shattered metal flying do you reckon well i just don't feel like we should risk it oh yeah it does split yeah oh that's that's satisfying that's like clicking your fingers at uh are these tools unusable or like the saw not good out of a box said woodwork learner no they're not they're they're usable they are usable like i cut a dovetail with them if it wasn't osb it is the thing with these tools right saws chisels mallets marking out equipment they're quite simple in the there's like usually only one thing to sort of interact with it's things like planes where you've got multiple adjustments and you rely on things being flat and square to each other and block planes for example like the little thumb plane that's the sort of thing you want to invest money in because ones like this that is a pain to adjust the bottom of that is not going to be flat whatsoever spend like 100 quid or so and get yourself a decent plane and then the rest of it like these cheap chisels they will work the saw will work everything will work but if you want to get a plane that works out the box you've got to spend at least 100 quid if you want to buy a cheap one you can do it up it's just a bit of a pain in the ass and i'm not the one to um to learn from to do that because i have never done it before i've done it once and it didn't go very well so don't bother but um yeah a plane invest money in the rest of it you can get by [Music] matt the screw on my veritas marking gauge often comes loose have you noticed that with yours that's ben uh it's happened occasionally on mine i'll just do it up a little bit tighter um put a little bit of um not like a very loose thread lock in there some people in the comments have a better idea of what you could use if you will join the fan club there will be a competition as soon as matt uploads the sketchup series i think matt will put a knife towards that that was what i was putting it towards you that was actually it that's what i was trying to remember yes that is it osb marking knife will be donated to that competition i'm in need of mcdonald's sarah i didn't say that four score and seven years ago our fathers brought forth on this continent a new nation conceived in liberty and dedicated to the point that all men are created equal now we are engaged in a great civil war testing whether that nation or any i have no idea what that was something about america i feel like it was song lyrics i don't know is it like could that be lyrics of seven nations i don't know i'm just trying to find something to do thank you for the donation thank you for the donation very kind very kind um right should we should we call it there or is there still a lot of stuff flooding in no i think we should call it there um in terms of all right shall i just stand over here just yeah so don't shout in terms of what are going to happen with the tools after this i i realize a few of you are suggesting donating them all that sort of thing but they will be used for other videos in the future tall jewels being a great example of that just not that ruler because i broke it no no no not this specific ruler but you do have a second i do don't i yeah yeah but yeah break that in a second as well yeah we will be using this for tool duals and demonstration purposes as well because i think it'll make some very very good videos and educational content as well so yeah plus i think even someone who's donated these will be let down well done smith thank you thank you i'll tell you what should we get a quick uh quick close-up of that yeah just so that people can get if you stay there got a nice little one what me no it's just the black on your shirt i'm a nice backdrop no oh it's nice actually i'm actually quite amazed that i managed it to be honest i thought the dove sales would be a little bit more crumbly than that in fact what's funny is the uh the duke was actually or padauk was more troublesome than the osb itself i mean to be fair it's troublesome like purdue is yeah you know it isn't as red no it's tighter grain as well yeah but yeah there we go i'll get a photo for the group oh nice that's your best donation yet rob yeah it's good yeah yeah nice right so yeah if you want to uh be in a chance of winning this you can join the osb army by purchasing t-shirts hoodies sweatshirts beanies i think there's trucker cats on there as well i can't remember theirs anything that's osb related other than stickers it has to be actual uniform um you'll be in a chance of winning i we've got new merchandise being added soon so i will add that to the store over the weekend should you wish to pair it with anything else i was hoping to do a grander release than this to be honest but people bring up a valid point there'll be lots more merch and so we might as well might as well chuck it all on at the same time uh quick one nathan you asked can you get multiple entries into this yes you can yes you can of course and that that will add on to any previous purchases you have made i'll basically be downloading spreadsheets of everyone who purchased a piece of osb armor uniform for each item and then i'll chuck that all into the competition as well so yeah for each item you will get an extra entry of course poster yeah i got them it's like the who's the guy who points how long do they have to buy one week one week announcing it by far i think we're going to get bob lauren next week from bosch to do some sort of product unboxing and we will unbox uh we'll do the competition winner then i suppose whether bob's here or not if he isn't able to come up then yeah we'll do it ourselves but one week one week there you go all right yeah smash in thank you very much for hanging out tonight guys it has been an absolute pleasure it's been a new an adventure for lack of a better word to be honest actually i really didn't think this would go together but thank you for wait you didn't support me through this he didn't support you made them more troublesome for i don't know why i'm being so kind i'm being so kind but yeah i guess thank you for watching those of you who liked the video thank you very much for doing so if you haven't already please subscribe it really helps us out and like the video if you haven't already next week we'll be doing a live stream at six o'clock revealing the winner of this but don't forget we also do live streams on the second channel from about ten o'clock in the morning till about five o'clock in the evening on thursdays and fridays so if you want to see what we're up to throughout the day join us on the second channel from 10 o'clock onwards in the morning bst that is it'd be great to have more of you hang out there all right so thank you for watching have a fantastic weekend and we'll see you next time bye-bye [Music] no thanks for releasing the new shirts help save on shipping pleasure [Music] [Music] [Music] right [Music] [Music] good [Music] [Music] right [Music] you

Channel: Matt Estlea

Views: 31,174

Rating: 4.8629551 out of 5

Keywords:

Id: PEIHAuupBkY

Length: 158min 0sec (9480 seconds)

Published: Fri Oct 02 2020