8.2.2.7 Packet Tracer - Configuring OSPFv2 in a Single Area

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
hi friends so welcome to all this video we are going to see the packet tracer activity configuring OSPF v2 in a single area here is our objectives of this packet tracer activity in part 1 configure OSPF v2 routing then in Part II to verify the configurations we will go through the background in this activity the IP addressing is already configured we are responsible for controlling the through a router topology with basic single area OSPF v2 + 2 then verifying connectivity between n devices coming to path to 1 configure OST of v2 routing that step 1 configure OSPF on the r1 r2 and r3 use the following requirements to configure OSPF routing on all three routers so process ID is at n router ID for each router this is for R 1 1 dot 1.2 1.1 and for our 2 to R 2 to R 2 & 4 are 33.3 road 3.3 the network and tressa for each interface LAN interface is too passive do not use the default keyword right so we will configure this OSP of our r1 r2 r3 now coming to r1 here we can see that directly connected networks 172 dot 16.2 1.0 / 24 172 Road 16.3 wrote zeros nurse 30 and to one ninety two dot one sixty eight or ten dot 4/30 and here we can see the passive interface a Gigabit Ethernet 0/0 coming to the configuration or one CLI enable configured terminal and here we will go to router OSPF and the process ID 10 then router ID 1 dot one dot one dot one now we will give the network 170 2.16 dot 1.0 and the wild card to bits 0 dot 0 dot 0 dot 255 now we have to specify the area as 0 the next network 170 2.16 dot 3.0 and the wild Academies 0 dot 0 dot 0 dot 3 area 0 coming to the neck next network one ninety two dot one sixty eight dot 10.4 and the wildcat a bit 0 dot 0 dot 0 dot three area zero oops your dot three right area zero now we will set the passive interface that is Gigabit Ethernet 0/0 yes so now we will save with the configuration copy and English start up now coming to the router r2 here we can see that directly connected networks 170 2.16 dot-to-dot 0/24 172 door 16 door through note 0 slash 30 192 dot 168 go 10.8 / 30 and here we can see the Pasi interface Giga with the third zero star zero coming to the configuration on our to enable configure terminal router OSPF process ID 10 and to the router ID to door to door to door to network of 170 2.16 2.0 while together bits 0 dot 0 dot 0 dot 255 and the area is 0 coming to the next network 170 2.16 toward 3.0 oops given all comma right 170 2.16 dot 3.0 and the vile thing had bits 0 dot 0 dot 0 dot 3 and the area 0 the last network one ninety two dot one sixty eight dot 10.8 and the wildcatter bits 0 dot 0 dot 0 dot three and the area zero now we will set the passive interface a Gigabit Ethernet 0 slash 0 and we will copy from running do start up coming to the router r3 here we can see the directly connected network so 192 dot 168 door to 1.0 the last 24 192 dot 168 door 10.8 slash 30 and to 192 dot 168 go 10.4 slash 30 here we can see the passive interface Gigabit Ethernet 0/0 coming to the configuration on our three enable configure terminal router OSP of process ID 10 we will set the router ID 3.3 road 3.3 now we will give the network 192 dot 168 tor to 1.0 and the wild-card bits 0 dot 0 dot 0 dot 255 and the area is 0 next network one ninety two dot one sixty eight dot 10.4 and the wild card with 0 dot 0 dot 0 dot through e and the area 0 cuban extra 0 so here's 3 area 0 and the last network 192 dot 168 or 10.8 and the wild card with 0 dot 0 dot 0 dot through e area 0 now we will assert the passive interface Gigabit Ethernet 0/0 coming to a step to verify OSPF routing is operational con each router the routing table should know how air route to every network in the topology right we will verify that so fall we will verify on our one so IP route and here we can see OSP of routes is now we will come to our to CLI show IP route yes here we can see that OSP of Oh coming to our 3 CLI show IP route and here we can see that yes coming to party to verify the configurations each PC should be able to ping the other 2 pieces if not I check your configurations right so now we will verify the configurations we will get the IP address of PC - yes your it is coming to PC one the stop command prompt here we are going to give you the pink yes we are getting the replay no we will test it to PC three here is the address of pc3 coming to pc one yes we are getting the replay yes that's all in this packet tracer activity here we can see the completion status 100 out of hundred so in this a packet tracer we have seen how to configure OSPF v2 routing and finally we verify that the configurations but your friends if you have any doubt - please comment below also if you liked my video give a thump and for the future videos you can subscribe the channel right now so that you will get latest uploading video info into your Gmail thank you
Info
Channel: Tech Acad
Views: 44,023
Rating: undefined out of 5
Keywords: Single Area OSPFv2
Id: RB903PIb87U
Channel Id: undefined
Length: 9min 31sec (571 seconds)
Published: Mon Oct 16 2017
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.