4.5.1 Packet Tracer - Inter-VLAN Routing Challenge

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
interview routing challenge the addressing table r1 router gigabit zero zero the gigabit zero zero the connection to the clouds and sub interfaces on gigabit zero one okay sub interfaces on gigabit zero one as one with ip address as one with ip address three pcs on different vlans on different networks three pcs on vlan 10 20 theoretic and different networks and server on the cloud server on the clouds bill and table blank number name interface assignment instructions assign ip addressing to r1 and s1 based on the addressing table okay and click on r1 command line interface enter enable configure terminal okay configure fields this uh interface gigabit zero one on r1 it should be configured with sub interfaces okay interface you can be 0 1.10 okay you go with 01.10 enter and before to apply the ip others you need to apply the encapsulation and okay this ip address belongs to tang network and 10 tank network belongs to billante and set the ip address ip address 172 17 10.1 subnet mask 255 255 255 0. okay now the next 1.20 1.20 encapsulation 20 network 20 network belongs to vlan 20. okay 20 ip address 20.1 20.1 the same subnet mask enter all sub interfaces are using the subnet mask 24. [Music] here the encapsulation that one q30 ip address theory.1 ada okay ada encapsulation that one queue ada but wait a moment and chang is faculty 20 students bill and theory guest belong 88 is not deep so use here space native keyword okay to identify then a tip enter and now and set the ip address 88.1 88.1 99 99 encapsulation encapsulation dot 1q99 ip other is 99.1 okay enter okay with uh you need to enable gigabit tier one the physical interface interface gigabit zero one not shut down and now you can see here the green indicator okay on s1 the ip address and the full gateway okay as one default gateway on s1 okay as well enter enable configure terminal as one billion 99 interface below 99 ip address net mask ip address 172 17 99.10 subnet mask 24. now shut down exit ip default gateway and use this default gateway 99.1 172 17 99.1 okay enter great name and assignments on s1 based on the vlan and board assignment table ports should be in access mode your billing names should match the names in the table exactly okay case sensitive okay on global configuration mode configure all these vlans with names okay vlan 10 name okay okay sensitive faculty slash staff no spaces vlan 20 name students students bill and theory name guest default okay case sensitive no spaces belong ada name native and vlan 99 okay name management be careful with the knives then exit but don't forget to assign belongs okay first internet 11 to 17 to vlan 10 select multiple interfaces with interface range command and facet them at 0 11 to 17 okay access mode okay switchboard mode access okay and access to bilante b lantern now 18 to 24 to 120 18 to 24 or taxes bill and twenty six to ten two billion thirty interface range 6 to 10 to should switch for more losses and relativity gigabit 01 for the native okay the this is gigabit zero one the connection to router and should be trunk okay should be trunk so configure gigabit zero one s1 as a static trunk and assign the nativila okay gigabit zero one static tron the connection to r1 okay interfacing with zero one switchboard no trunk okay gigabit tier one switchboard mod trunk and then the nativilang the native lang is ada switchboard trunk tblan ada and okay and don't forget belong 99 is assigned to belong 99 okay and it's not assigned to a port it's not assigned to a port or ports is assigned to the management interface belong 99 with the ip address so this is okay not problem and all ports that are not assigned to a vlan should be disabled okay that's it global configuration mode select multiple ports okay interface range okay from 6 to 10 assign it from 11 to 70 assignment from 18 to 24 assignments you gigabit zero one as island and from one to five not asylum okay falsetto zero slash one to five and gigabit zero two not assign it okay coma gigabit zero two enter and should be disabled shutdown enter okay exit configuring turbulent routing on r1 okay go to r1 already configure it this is the interval and routing verify connectivity okay pc1 command prompt ping pc2 pc2 pc2 ip others 20.22 172 17 20.22 success from pc1 pc3 30.23 fear the data initially success pink as one s1 99.10 99.10 success repeat all success pink 2r1 for example one of these sub interfaces 172 17 10.1 172 17 10.1 success now pick the server but verify if gigabit zero zero with verify if gigabit zero zero on r1 is uh is the is configured go to r1 and show ip interface brief gigabit zero zero it's configured with an ip address app protocol app very good and it's is configured and pinned to the server from pc one pick the server is 50.254 120 217 50. 254 enter okay repeat and all success very good completion 100 thank you very much you
Info
Channel: Christian Augusto Romero Goyzueta
Views: 9,561
Rating: undefined out of 5
Keywords: switching, routing, wireless, essentials, srwe, ipv4, switch 2960, switch, vlan, trunk, native vlan, trunking, inter vlan routing, router on a stick, access port
Id: 9GyrDYgGQAE
Channel Id: undefined
Length: 13min 22sec (802 seconds)
Published: Sun Aug 02 2020
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.