(1371) Whipped: Anker by Darrel & His Wife

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
[Music] all right guys this is enough to make me sweat almost as much as the letterhead coming from master locks lawyers but this is a challenge lock from Darrell he says hey I've put together this challenge lock for you which is part of a lock suite that we run for local Housing Authority although this particular lock is not in use anymore so there's no security risk implications this is the interesting part my wife and I enjoy watching your YouTube videos it's terminal block left turning to a family affair that's great from the United Kingdom and our a patreon of the lock labs I look forward to seeing you have a go at opening our challenge lock in a future video all right first of all thank you for watching the video and secondly thank you for being a patreon I really appreciate it all right what do we have we have a locksmith assembled and Kerr not like part of a ship but a n K er I've never seen one of these the keyway man you can see right through there it's like huge huge opening there and I won't have any trouble getting pics inside of there no weirdness on the sides well maybe a little no that's just smooch we have six pins and the anti drills are gone it doesn't matter we're not gonna be drilling it we're gonna be picking this thing I do have a key Darryl did send it it is right here let me turn that around so it kind of gives another shout-out to Devon and Cornwall locksmiths and there is the key all mummy so hopefully we don't need that stinkin key because I am just gonna whip this thing open because I have a lunch date not really okay find a tensioner now there is a it is pretty wide open but tensioning maybe a little bit of a challenge because of that piece of warning right there at the top I'm gonna have to go in kind of cockeyed maybe like shove that in there that ought to work that's what we're gonna use it's the white one the one millimeter and since I like doing things backwards I'm gonna go counterclockwise let me grab a twenty five thousand three can let's break up a false ad you know it looks wide open but I gotta say there's some more ting in there grabbing right there in the middle I'm gonna go a little bit of an angle so I'm turning the pick at about a at the one o'clock position or one o'clock angle to get past that warning I'm gonna use some heavy to slide it in I'm gonna play heavy tension now cuz light tension wasn't really working and now right in the front I've got a bound pin alright so let's try to go clockwise which hopefully would mean the binding order would change and it wouldn't be the one in the front that would bind up first come out of there okay I did hear two things drop let's try that again maybe this is working better than I thought all right let's try a rake with more to it more rise so I got a feeling it's probably a little more extreme bitter than we thought and do something something different since what I was doing wasn't working we get the Kronos tool out and give this a go a lot of you guys asked if I ever use the Kronos on challenge locks and the answer is no I used to try it but after like a hundred tries it was never successful because of all the security pins and weird warding the variety of different reasons but and all those tries had never had a single success on a challenge lock not on a normally like a production lock commercial lock yeah it worked like a champ but I'm gonna let go Mississippi here anything yep I heard three things two or three okay my tensioner is coming out I can feel it okay that is not working so deep hook this is the pn0 five from multi pick I think he will get up around that warning I felt a little turn on the core there all right he is not he's a little bit too wide I think that warding is grabbing him so let's get hit the same thing except in 15,000 this guy this is from the SS dev kit in 15,000 and he fits in perfect I didn't hear anything drop all right let's try it going back the other direction again counterclockwise and we know the first one is going to bind up because he did last time I'm not feeling any super springs or anything like that in there okay I heard two pins drop so that was working better than I would have thought [Music] [Music] nothing all right I didn't think it would work but I'm running out of options here let's try going in with this guy maybe I can bully some stuff heavy tension I can tell you that's probably not gonna work but I haven't tried heavy tension yet nothing crap hey Siri stop timer hey Siri listen to me and stop the timer there that stopped it just joking all right whipped again oh man this is turning into a habit but let's see what we got in here hopefully something creative and innovative if there are trap pins I certainly didn't find him because I got nothing out of this lock nothing I got the tiniest of what I thought was a false set when I was raking I think it was on my second 10-minute attempt but that's it every time I released that the tension on this lock I would hear at least what sounded like about two pins maybe three dropping doesn't mean they were at the shear line but it means they were binding up but I certainly couldn't feel that feel it with any of the picks that I was putting in there so I don't know what to make of this so definitely a whipped and coming from a locksmith I should not be surprised I guess let's go ahead and take a look and see what Darryl's put inside of here all right darrell has frustrated me not only with I do have tools so maybe I should just use them if I can get him in there we go okay I had to bend it but that may be enough to get that clip off yeah all right tools do help we do have a key because I certainly can't pick him let's go and pull the key off and see what oils given to us I don't want to tear the business cards what in the world guys this is like two keys that is weird they they all look the same but the peaks are different there are peaks on the left side of the key but no peaks on the other side it looks like a key was somehow ground and then another peak and then milled away and another piece of key was put in there and how they did that how Darryl did that I can't begin to tell you maybe there's a double row of pins in there we're gonna find out wow that's really tight going in there but it works it is very tight to turn it as well it gets kind of hung up right about there I mean it works perfectly but that would have taken away from feedback I don't know if that was by design or not all right I'm gonna turn it to right about that angle cuz we don't want the pins dropping down inside of that crack I'm also going to shim it try to shim it the tolerances might be too tight it's really tight as it should be I'm gonna turn the key a little bit now and now it's definitely pinching pinching that shim really tight tolerances between oh there we go and I think that shim is all the way in now I'm going to turn him right about there and keep our fingers crossed so before I push that if there if you see up here in the top left if I have an imminent disaster then you know this is gonna go hopefully it's not there Wow really tight all right no disaster whoa I did not see where that came from let's put that okay there's where he came from right there all right we have some wafers on here so when I pulled that out the wafer fell off so let's go ahead and dump these with the key in it we'll start with number six because that way I can hold on to the bow of the key so number six standard five standard there's our first wafer on number four three two okay there was only one way for to throw me into full panic mode trying to figure out what's snagging that key right there doesn't matter worked perfectly probably just something on the warding maybe even I buggered something up with my heavy tensioning I might have bent a piece of that warding so probably my fault not Daryl all right let's get our let's just rotate that pull the shim out come out of the just leave it though just leave it it's not hurting anything right yes it is all right there is a commercial serrated and that core has that chimp inched you gotta get it tweezers tweezers tweezers okay there's our copper pin or copper spring number two we have a commercial spool and he was in there with a small end pointing down okay we do have a spring kind of caught up number three really shot out of there another serrated from spring Numerical a turtle another spool put in the same way why do I bother with those tweezers to try to grab those spring they don't stick up quite enough I can't even get him with a fine tip one there we go thinking there might be a second one in there as vigorously as he shot out of there but nothing all right let's go around take a look at number six okay there's one the can he's put in the same way with the small end pointing in fat and pointing up I'm not seeing any alien tech here guys I'm just seeing pure incompetence on my behalf yep and all we got here is another serrated another standard in spring and that is if there's no way unless he recapped these I don't see any way to put any threading or undercutting nope these are all standard all six of them in the core we didn't take a look at that but they are also all standard no mods whatsoever this thing is really tight in here so the tolerances I've never heard of anchor before so maybe if some of you guys want to chime in on the comments but my impression is that it has really good tolerances it's slick it's almost like there's nothing between the core and the body except maybe like a layer of oil very slick very tight the inside of this thing is almost mirrored very nice alright so this is what with me guys a locksmith in Devon and Cornwall all he did was use available technology put in some commercial serrated three commercial spools so you got three of each all standard downstairs when we look at the bidding on the key that kind of threw me it really does look odd I don't know that must have just been put in there let's look at it one more time real quick now I see on the right side of the key you'll notice that we have this evil piece of warding jutting right out there if we have a high point on the key like we do on the left side it wouldn't fit by that piece of warding on the right side so there all had to go in and grind off the high points on the right side of the key so he could fit those high points up inside of there if they had been just as high it wouldn't not have made it I've never seen that before what a evil twist that is anyway guys appreciate your time stay safe stay legal Daryl sir there will be one of these on its way to both you and your wife thanks for watching and thanks for being a patreon I really do appreciate it thanks guys alright guys time for the weekend and give away before I do that I would like to again ask you for recommendations on things to do reviews on I have several things and orders but they're coming from overseas so it may take a while and those of you who keep sending in you know recommendations you know that $10,000 exotic code cutting machine guys I don't have that kind of cash keep it in the hundred dollar range I'll be happy to grab it anything more than that I'm gonna be struggling with the budget for it anyway if you'd like to win the giveaway there is the lock lab address in the middle the page big purple button click it and register to win and you will be winning or registering to win a lock lab t-shirt I got several things here I have a set of brand new pinning tweezers from learn lock picking calm I have a brand new set of lock killer core killer keys from sparrows and last but not least something that you can no longer buy I bought this from bump school about probably a year and a half ago about an extra set of these it's 15 different best keys 15 different profiles for best locks you can't even get these anymore guys please do not try to go to this web address to buy it they are no longer in business as far as I know but if you'd like to win the last existing set that's it guys register and with a little bit of luck my webmaster will draw your name next weekend appreciate your time guys stay safe stay legal [Music] Porfiry on facebook and twitter thanks guys [Music]
Info
Channel: BosnianBill
Views: 41,741
Rating: undefined out of 5
Keywords: bosnanbill 1371, Anker by Darrel, Whipped: Anker by Darrel & His Wife, (1371) Whipped: Anker by Darrel & His Wife, LockLab, Bosnianbill, Bosnian Bill, lock tube, Lock Lab, whipped bosnianbill, bosnianbill whipped, bosnianbill 1, pick lock, bosnianbill lock picking, lock picking, lock pick, Lockpicking, locklab bosnianbill, locklab challenge, challenge lock, bosnianbill challenge, picking locks, how to pick a lock for beginners
Id: 9cOMS_ttmPY
Channel Id: undefined
Length: 22min 37sec (1357 seconds)
Published: Sat Oct 06 2018
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.