10.6.10 Packet Tracer Back Up Configuration Files

hi in this activity we will restore a configuration from a backup and then perform a new backup due to an equipment failure a new router has been put in place unfortunately backup configuration file have been saved to the tftp server here and now we are required to restore the file from the server to get the router bike online as quickly as possible so now on part one we establish the connectivity to the tftp server and all the ports on the router are shut down now we use the pca to turn it on and from pca click on the terminal and click ok and i show ip in the frame brief to check for the text the status of the interfaces we have a two gigabit snap and they are all down the gigabit isn't at zero zero and this is zero slot one so i interface no shot and the ip address for the gigabit 0-0 i will get it from the server here the default gateway oh sorry pca your ip address page here and with the subnet mask okay and for the gigabit zeros last one i will check for the configuration on the switch and show run or no configuration for the gateway so i think on pca i will get the this one the new phone gateway here i copy it and then i turn to the terminal and interface qrb 0 slot 1 no shut ip address paste here okay so i copy run start to save the configuration on the router okay now we test connectivity to the server i will test by using the app simple pdu from pca to the tftp server the first packet fail the second one is successful so the connectivity from pci to the ftp server it's ok now on part 2 we will transfer the configuration file from the tftp server by using the command copy jtp running config and add to the the remote hot is a the ip of the ttp server here the ip server and the source file name we can enter the config of the router a and rather even download it from the jtb server okay now on the router i enter copy tftp running config and then enter the ip address of the tftp server one two 2 and the source file name round 8 t a router a config fk fg destination file name the same okay now can you you can see the name of the router has been changed to rta and we can show run [Music] we have the password and some configuration the bundle mode and some profession that is previous previously saved on the jtp and issue the approve appropriate show command to display the interface status show ip interface brief [Music] and both interfaces are up and correct any issue related the interfaith problem and tests connectivity from bca and to the dftp server the first one and the second one that is 0 0 okay and 0 slot 1 zero shot one it's okay then we test for the connectivity so it's successful now on part three we will backup configuration and ios to server firstly we change the hostname from router a to router a1 by using the command host name ta 1 and save the configuration to do copy run start and then copy the configuration to the dftp server using this command copy run t f tp [Music] do copy the ip and the destination we keep it issue the command to display the files in flash as show flash and here the system file on router 2 on router i one router and now we back up the ios in flash to the dftb server so i copy it copy and i copy class dftp the source file name ipads here the address the destination filename we keep it and it is uploading to the server and now we check on the techdb server to find out this system image file here the service tp and check for this one m4 b so that is all for the activity thanks for watching

Channel: Cisco Packet Tracer Labs

Views: 3,185

Keywords:

Id: svNRYeVgtDU

Length: 10min 5sec (605 seconds)

Published: Sun Oct 31 2021