Zippo Lighter Restoration, Harley Davidson edition gold plated

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments

Yeah, that's a very interesting distribution of where it's rusted to pieces and where it's still shiny.

๐Ÿ‘๏ธŽ︎ 6 ๐Ÿ‘ค๏ธŽ︎ u/phelyan ๐Ÿ“…๏ธŽ︎ Feb 19 2020 ๐Ÿ—ซ︎ replies

I have been doing these kind of restorations for myself but seems like a word likes this so guys I will make a channel put my stuff up and even debunk these guys.

๐Ÿ‘๏ธŽ︎ 7 ๐Ÿ‘ค๏ธŽ︎ u/ksmarcell ๐Ÿ“…๏ธŽ︎ Feb 19 2020 ๐Ÿ—ซ︎ replies

Fake af. No pitting/loss of material, even tho it seams heavily rusted. The cast iron emblems too turn out perfect efter a sand blast. A sand blast on real rusted cast iron would turn it into...sand.. Anyone who has ever worked with metals will see this is total hourse shit.

๐Ÿ‘๏ธŽ︎ 6 ๐Ÿ‘ค๏ธŽ︎ u/unclesailor ๐Ÿ“…๏ธŽ︎ Feb 19 2020 ๐Ÿ—ซ︎ replies

Rust isnโ€™t real...

๐Ÿ‘๏ธŽ︎ 3 ๐Ÿ‘ค๏ธŽ︎ u/SexyOVERTime ๐Ÿ“…๏ธŽ︎ Feb 19 2020 ๐Ÿ—ซ︎ replies

Anyone who has actually restored anything can clearly spot the BS. This is one of many โ€œrestorationโ€ videos Iโ€™ve seen that basically just clean up a dirtified object.

๐Ÿ‘๏ธŽ︎ 2 ๐Ÿ‘ค๏ธŽ︎ u/Highlander1732 ๐Ÿ“…๏ธŽ︎ Feb 25 2020 ๐Ÿ—ซ︎ replies

I think every zippo is either brass or stainless and would not rust in the first place. Total crap.

๐Ÿ‘๏ธŽ︎ 2 ๐Ÿ‘ค๏ธŽ︎ u/Highlander1732 ๐Ÿ“…๏ธŽ︎ Feb 25 2020 ๐Ÿ—ซ︎ replies

how can you tell it's fake?

๐Ÿ‘๏ธŽ︎ 1 ๐Ÿ‘ค๏ธŽ︎ u/PorschEHHH ๐Ÿ“…๏ธŽ︎ Mar 14 2020 ๐Ÿ—ซ︎ replies
Captions
This needs sandblasting I use white aluminium oxide this time Air pressure it set to 80 psi when sandblasting Sandblasting the Harley Davidson metal emblem The Harley Davidson emblem after sandblasting PLEASE CLICK LIKE The Zippo inside case is stuck A little squeeze of WD40 always helps What a mess! What do you think happened to this Zippo? Leave a comment below the video I will use medium fine sand for this job I will let the Zippo parts tumble for 1 hour Now we clean the inner Zippo case Nice and shiny Zippo inner case The small Zippo parts are done tumbling Nice and clean now But they need some polishing Now the Zippo parts are shiny too Cleaning and polishing the lighter case Fitting the rivet to the Zippo Installing the rivet with a flat drill Installing a new Zippo lighter wick Adding a new Zippo flint Adding original Zippo cotton Adding new felt pad I will now add a very thick 24 carat gold layer Water with alcohol The metal must be 100% clean before gold plating I use an ultrasonic cleaner to clean the metal I will clean the Harley Davidson emblem 2x5 minutes Then I dip it in hydrochloride acid DO NOT TRY THIS AT HOME Then I clean it in distilled water Nickel plating the Harley Davidson emblem Nickel is the base layer for the gold to stick on Remember to use proper safety equipment This is the 24 carat gold solution I use Adding 24 carat gold to the metal emblem The power supply is set to 4.4V/0.4 Amp I repeat this many times to get a thick gold layer It took me many hours to reach perfection Zippo premium lighter fluid The Zippo lighter before restoration
Info
Channel: Awesome Restorations
Views: 30,915,150
Rating: 4.868001 out of 5
Keywords: Restoration, Zippo lighter restoration, lighter restoration, restoration video, lighter, zippo, zippo refill, zippo fluid refill, sandblasting, zippo lighter, harley davidson, harley davidson lighter, harley davidson zippo, harley davidson zippo lighters, gold plating, zippo restoration, electro gold, electro gold plating, pen gold plating
Id: nTIGARZRqgc
Channel Id: undefined
Length: 12min 5sec (725 seconds)
Published: Thu Feb 06 2020
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.