Transforming My Trash PC Into My Dream Gaming PC!

so this right here is my current gaming PC and as you can see it's not the best so that's why we could wirelessly went broke trying to buy my dream gaming PC I spent over 3500 on this gaming PC and today I'm gonna finally be building it don't forget to like subscribe and let's get straight into this video first we got the motherboard out the box and got it ready on my table to start the build and we got the i9390k out the box and we're ready to put it into the motherboard after unboxing the CPU base you have to align the small little triangle on the bottom left into the holder and then you have to put it in really delicately and then gravity should do the job and push it in itself alright guys so it turns out I was being a complete idiot the whole time I basically had to move the Black cover now so I just moved the cover now so I'm an idiot I'm sorry I took me a while to figure that out but uh now I know okay everything should be good now so let's go ahead and continue with the build just like that we already done with the first two steps so that was pretty easy and it was time to put in the 32 gigabyte ddr5 RAM so now it's time to install the ram into the motherboard so let's go ahead and open it up and start stalling it guys if you have any tips for me for my future PC builds let me know because I am going to do about this and this is my first time so you know don't roast me I'm trying to learn putting the ram in this pretty easy you need to open up the second and fourth slots put the ram in let's put a little bit of pressure and just like that the ram was in let's go ahead and open up the RAM and put into the motherboard in total we got 64 gigabytes of RAM so we got the ram out of the box now let's go ahead and place it in so we got the first Ram stick in now let's put the second one in so I just took the sticker off the ramp because I think you're supposed to do that so now let's put the second uh stick of ram we're gonna put an A2 and B2 I think so yeah we're gonna skip one for each uh piece of ram all right so I think we installed the ramp correctly and then it was time to put into one terabyte SSD so I have to take off the magnetic coverage my motherboard had then had to unscrew this other little black cover and then I could put in my SSD putting the SSD in was pretty easy I just have to push it in and then the job was done now it's time to install the m.2 SSD right here so now let's go ahead and install it there is the m.2 SSD right here one terabyte okay let's go ahead and take off the cover for it let's put it over here and now we gotta screw this off right here after I was on playing the ssdn I quickly went to the living room to unbox the PC case all right so we got the motherboard pretty much set up so now let's go ahead and unbox the PC case right here it's the lien Lee 011 Dynamic Evo we got the all white one so it should be looking pretty sick so let's go ahead unbox it so we can continue on with the build [Music] so now I lost my thermalty power supply right here so let's go ahead and open it up and let's see how the thing looks in person all right okay there you go all right here it is the beautiful thermal take power supply this thing is so heavy but there it is right there all right so let's go ahead and let's install this thing the little kit right here we got a bunch of cables in here oh my God all right there is so much larger it's not a lot of the kind of intimidating but um go ahead and let's do this all right there is so much wires wow all right so go ahead and connect this now so I think it's supposed to go like this right here all right so we got these first couple of cables in I have no idea what I'm doing if I'm gonna be honest with you guys let's go ahead and speed through this but I'll be back once again it took me a bit but we got all the cables plugins to the power supply so now it sounds connected to the motherboard or do whatever we need to do next so yeah we got that done so let's go that it's another success involves in the living room quickly set up the power supply it was pretty easy all you have to do is basically just align the pins into the box and mine was fully modular so it didn't come all connected to us so I have to put it in myself and I had to watch a video for it but other than that it was pretty easy 24 pinch uh little cable it's the motherboard now all right so we got it plugged in now when we got the power supply plugged in let's go after I started to install all the fans into the case so I start to screw them into the holder one by one and before you do it they're all done inside the case all right so we've got the power supply inside we've got to screw in a couple more screws but yeah I'm gonna just record myself doing it now because I feel like I skipped a lot we gotta scream the power supply store does not move so let's go ahead and do that right now guys I'm honestly is this honestly a bit easier than I thought I was actually expecting something really complicated but I don't know if I got to the hard part yet so I don't want to talk too soon all right let's put in this last little screw right here all right so let me show you guys something oh right here look at all these cables I don't know I'm gonna sort these out but it is super super like it's super super messy right now but hopefully we can fix that so uh hopefully uh this doesn't stay here for the whole build all right let's go ahead and put these little cable ties inside the PC so we can match the cables a little bit at least all right so now I'm just putting these little cable ties so I can organize the cable management a little bit and I'll just move all these cables slowly up here all right just organize the cables I'll be back in a bit and then after connect the power supply cables into the motherboard so I have to connect the 24 pin into the 24 pin holder and the motherboard and that thing goes eight pin that I have to plug into the other side of the motherboard and I don't want to get too much into detail but there's a bunch of other cables I can plug into the motherboard but I don't want to go into because it's kind of boring for some of you guys but it was pretty anyone plugging in the wires because it takes a long time since I'm a Noob I have to figure everything out one by one and watch some videos but I got it done and then it was finally time to unbox the 470 TI according to 470 TI into the motherboard was easier than expected you they just have to put a little bit of pressure and it'll just lock in but before you actually put it you have to unscrew these two little latches on the side of the PC but those are pretty easy to do also this look how sick that looks right there God that actually looks beautiful bro let's go ahead and take it out and I want to show you guys how I want to takes out the box to see how it fully looks right there this thing is huge Bros actually massive but it looks amazing after that was pretty much done so I took it to the living room to try to turn it on and uh this is what happened all right so after hours and hours of hard work we're finally done with this gaming PC it was literally 3 500 and I literally got a couple heart attacks during this video I actually bought a couple wrong pieces and I had to return them and put the new ones in so that's why it's a couple days later yeah I'm pretty dumb and I'm gonna do that making PC but we're finally done so I'm excited to show you guys how this looks so let's go and turn on the PC and show you guys how much of a beast this thing is and how crazy it looks hope you guys enjoyed this video so far it's pretty different video on my channel make sure to like And subscribe it's so close to 4K subscribers and uh yeah and yeah let's go ahead and turn on this PC and show you guys what it looks like in full effect three two one go yup this is how the PC looks boys he's absolutely insane we got we got the Kraken X7 so we all distracted we got this PC maxed out it absolutely looks amazing I honestly love how this PC came out it looks super amazing and honestly looks better than I even imagined I mean we got the 10 fans three on the top three on the side and three on the bottom and then one on the side right there actually is the red color the cable color the fan color and even the cooler colors so I can only do anything I want with this PC and make it any color or vibe that I want but right now it's made of blue let me know what you guys think of this PC build it'll give you any tips and tricks to the future if you guys want more PC videos you know come along and enjoy my channel but honestly I can't stop looking at this thing bro it looks absolutely insane hope you guys enjoy this video and I'll see you guys in the next one peace out

Channel: Mini Mamba

Views: 57,991

Keywords: Building The PERFECT Dream Gaming PC - RTX 4070TI - I9 13900k - Lian Li O11 Evo, gaming pc build, pc build, building my dream gaming pc, building the perfect gaming pc, expensive pc build, budget pc build, gaming pc, best gaming pc, 4070ti, 19 13900k, i9 13900k build, lian li build, lian li 011 dyanic evo, white pc build, best pc build, building gaming pc with no experience, first pc build, how to build gaming pc, Transforming My Trash PC Into My Dream Gaming PC!

Id: KZo10xvHlY4

Length: 6min 38sec (398 seconds)

Published: Sun Feb 26 2023