Time Lapse: Taking Apart Smokey Yunick's Hot Vapor Engine Part 1

[Music] [Music] this is one that danny has had for a while danny actually has five of smokey's hot vapor engines it's kind of scary but it's kind of fun uh now i can probably lift up the camera maybe um but that's actually a good angle okay [Music] you can i can see well i can turn it around but i turn around this way because most of the of the love is on this side on this side [Music] over here we have basically an exhaust manifold and a pipe going to this side there's nothing on this side that's any different than any other [Music] engine [Music] we go into stage 3 heating stage 3 heating is the conduit from the homogenizer to the engine check this out see that [Music] [Music] [Music] [Music] basically smoking had jinx for everything and i love i can just look at all their little pieces that's all handmade little pieces that's just a tab to hold a bolt and there's little tabs everywhere um he jigged up everything okay folks this is when you're supposed to be thinking of your questions or not i just had a lot of questions on youtube and instead of sitting there answering and people it doesn't work it doesn't this it doesn't it's fake it's you know it's just a picture of an autumn i just thought live and answer stuff live i mean when you see those comments from people who say it's fake remember there are still people who think the earth is flat and i and i almost want to get you know do you have to fly in a plane all around you know to not to think that the earth is not round and then i you know it'd be like oh from space i could only see half the earth you know it's like yes it's true uh um i don't have to get into a if you don't understand it because you don't have the ability to understand i can't help you get the ability to understand if you don't understand because but you actually do understand things and you just don't grasp this i'm off let's do it that's why i'm doing a video [Music] okay so we so we see pretty much underneath here looks really nice and clean it was a brand new motor i don't see any signs of where the rockers or the fulcrums all got burnt got hot i want to drain the oil so bad and oh shop mom so you can let me know what we're doing i'm just enjoying we have we haven't done a live stream in a long time and we're not doing a lot this is really a this is elijah it is we're doing it live yes we are we are doing it live no who who would do that who would who would do the secrets of smoking in his motor no one talks about oh my god it's all snicker ask questions or don't and the people will come back and watch this when i actually put it on now on my youtube channel will go damn i should have been on and asked to ask the questions but you do have the opportunity to ask right now and lead us in the way you want to see but if i get nothing else i'll either going to drink beer or drain the oil now there was a suggestion drain the oil and then while it's draining we can take off other things a multitasker there you go okay what do we see here what do we see here i'll hold it steady i know y'all will snapshot it zoom it in pull it in there and that's okay distributor clearly says right there turbo come on smokey that's your riding well we cut the bolts down in the throttle plate and we machine the bolts down to something for a little bit more airflow if you all the no no he did that uh roller ranger wants to know if you are going to be able to reproduce and build a working vapor engine and put in a vehicle i guess a later rival the answer to that is yes yes [Music] [Music] and faye says thanks for your interest in smokey's concept i always was interested in it this has been a continuing source of fascination for danny fay for as long as i have known him we have been reading smokey discussing smoking uh living breathing since we started dating from day one start from day one that's right [Music] [Music] so [Music] um what am i seeing all of these are already numbered and for those of you who just got here uh what dan is doing is taking apart for the first time smoky unix iron duke hot vapor cycle engine look at that he stamped one two three and four they're not the original vowels you're saying how can you tell they're not the original vowel by looking at the top there were too long there was something different about the intake valves because they're cut they're cut they're machined the factory valve has a little bevel on it these are super sharp you know how i'm a stickler to valve heights so i had to get a straight edge and check what did you do here smokey i don't remember doing this head but it's perfect it wasn't you who did it that's right and i didn't do it um and that's not coincidence monkey for those of you who don't know danny is taking a straight edge across the tips of the valves looking for any discrepancy in height and he is pleased can you hear that that is i'm glad i'm not the only one if i'm one thousands variants from one valve to any other valve i can't sleep at night we're gonna now use the youtube video to get all our data we'll be watching our own youtube video to get the data intake valve 163 exhaust valve is a hundred yes 110 so 50 000 50 000 is longer you

Channel: Daniel Soliz

Views: 2,463

Keywords: Machining, machinist, automotive machining, DIY, automotive DIY, easy diy tutorials, fix your car, fix your car easy free, machinist tips, cylinder head, cylinder block, headgasket, engine problems, Smokey Yunick, best damn garage in town, faye hadley, all girls garage, pistons and pixiedust, pixie dust, daniel soliz, danny and faye, automotive book club live, Hill Country Performanance & Machine, HCP, flathead, flathead ford, 8BA, 100mpg, gas, vapor, supergas, Hot Vapor Cycle, oil, GM

Id: IWDJsl15Gqs

Length: 10min 49sec (649 seconds)

Published: Tue Apr 27 2021