The MANDALORIAN - 3Dprinting & Painting N’stuff

hello again and welcome back to another video build this time around i'm making a huge quarter scale resin mandalorian and with a tiny baby yoda in the bag of course and as requested it's even more detailed with a real comprehensive look at all the steps and i really hope you enjoy [Music] the mandalorian yeah you guys having finally seen both seasons of the mandalorian show and needless to say just loved it so i just knew i had to make this model but before we get into it i just need to mention that in this particular video built and as requested by a lot of my fellow makers out there things are a little bit different it's a bit longer more close-up footage and definitely less talking but supplied with some descriptions i feel the visuals will tell the whole story and if you're interested or just curious about a particular part of this build like the base coat airbrushing or weathering etc just go ahead and jump into whatever peaks your interest by using the chapters i put in [Music] so yeah that's how we'll do it this time this time around anyway and please let me know what you guys think about this and that's it i really hope you enjoy it i have spoken [Music] [Music] [Applause] [Music] [Music] [Music] so [Music] [Music] so [Music] [Music] [Music] [Music] [Music] so [Music] so so [Music] [Music] [Music] [Music] so [Music] [Music] [Music] so [Music] [Music] [Music] [Music] so [Music] [Music] so [Music] [Music] [Music] so [Music] [Music] [Music] [Music] so [Music] so so and now we reach my favorite part of this build well any build really now we get to bring it to life we finally get to go from this flat boring base color to this look it just looks so much better and it's not just about the weathering but adding textures color tones and different depths just chasing your imagination really and losing track of time but there's a staggering 43 different pieces to paint and that's not counting all the smaller parts so i'll break it down like this i'm just going to use this leg as a demonstration for all the steps i go through and then we'll finish it off by going over some selected parts more quickly that is so let's get on with it [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] foreign [Music] [Music] [Music] [Music] [Music] [Music] so [Music] uh [Music] [Music] [Music] [Music] so [Music] everybody [Music] do [Music] do [Music] do do [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] so [Music] [Music] then it was time to just glue it all together [Music] and that was the final thing i did on this prop belt [Music] me [Music] me [Music] and that was it for this video build no narration and definitely a longer video than usual but it's good to change things up a bit once in a while and again please let me know what you think about this and if you want more make sure to subscribe and hit that bell and i will try and share my next build with you thank you for watching i have spoken again you

Channel: PropsNstuff

Views: 418,991

Keywords: prop making, cosplay, how to make props, 3dprinting, maker, resin printing, mandalorian, figure painting, painting a 3d print, tutorial

Id: 4mLBYk6do8w

Length: 29min 14sec (1754 seconds)

Published: Sat Apr 24 2021