THE DEERE IS BACK! Let's Finish This 8 Acre Bush Hogging Job With The MTL XCT!

all right everybody we're back over here on the eight acre project and we are getting very close to being done i've probably got an acre if that left i came over here it's monday i came over here last thursday and i basically mowed all of this basically from about where that pine is right there all the way down to the corner and pretty much finished all this i didn't do that because that was a little wet in there so i gave it the weekend to dry out so it's gotten a little bit drier in here not as much as i would have liked it but uh we're going to finish up that little spot and finish up this up to that ditch right there and then do the front and see if we can't get this done today um i but i got all this is about four acres i got done in here in about four hours yesterday so i made pretty good progress with that so um i was happy with that so not too much left to go see if we can uh just get the rest done i am the back the other side of that ditch where that pile is right there is kind of wet down in there though so there's like the ditch and then the pile and then there's like a low area kind of wet in there so we'll just have to get in there as best we can and see how it goes so um i'm probably going to put you guys on top for a bit and then i got the tripod too man i'll get the tripod out and film some of the front there set that up so let's get rolling all right guys back here on this back side i ended up finding a whole bunch of holes and ruts that were really deep a lot of them had water in them and i was really worried about getting you know sliding down and getting stuck in one of them so you'll see me kind of just kind of try to mow around them as best as possible i'm going to edit this as best i can to kind of take out the parts while i'm driving around them and backing up and going around things and it was kind of a mess in here a little bit with having to work around some of that just with the the terrain so just bear with and i'm gonna try to edit out all the nonsense and just leave in the cutting part so so so so so so so so so so so so so so so so all right guys the backside is done um i didn't my plan got a little wonky here it was that's a hole there i wasn't able to get that little bit right there and i was trying to just go this way and finish out this little bit but all of that in there was all low so i felt better going into it because then i could back myself out into the high side if i got stuck and that seemed to work out pretty well i was able to get all of it took me a little bit longer but um it had been a lot longer if i would have gotten stuck and had to go get the mini to pull myself out if i couldn't self recover so i just kind of played it safe and uh just kind of cut that until i got to the high ground right there and then just was able to go parallel to the ditch and finish that up so um bringing the mini down here actually really helped me along this on this back side of that ditch because there's there's hills there where those pines are along there and that was a pain um to even have to cut this side but i didn't really have to go around on the other side because i already cut that with the mini when i came over here and did the ditches so that ended up saving me a lot of time but all this is done back here i got this little patch right here no problem and uh it turned out pretty well so all we got is this little bit in the front and uh it's game over let's go get it done so way wow wow wow wow wow wow wow wow you

Channel: IDigIt4

Views: 10,894

Rating: 4.9203539 out of 5

Keywords: MTL Attachments, MTL, XCT, XC7, brush cutter, bush hog, brush cutting, bush hogging, John Deere, 329E, skid steer, CTL, heavy equipment, operator, land clearing, lot clearing, outdoors, satisfying, grass, weeds, brush, forestry, drone, GoPro

Id: A6eopKi8nW4

Length: 34min 16sec (2056 seconds)

Published: Tue Nov 24 2020