SubGhz Bruteforce Attack with Flipper Zero

we'll be using the sub Giger Brute Force attack on The Flipper zero to open a gate scroll to your apps down to sub gigahertz and then to Brute Force should be on the lineer 10bit 300 mahz start that attack now you're going to see in the side view mirror eventually one of these codes is going to open up a gate the gate I'm using the extreme firmware and The Brute Force sub Giger app you'll see it's rolling through these codes here very quickly and you'll notice in the side view mirror you'll see it and you'll hear it that the gate's going to open once that happens you'll see me stop the attack and then I'll roll the codes back but let's watch it's just cycling through all the codes once it gets to the correct one the gate will open there it is gate opens I stop the attack now I'm going to roll the codes back once I do that you press down to resend the code right to scroll to the next code until you trigger the correct one that will shut the gate there it was you can hear it see it shutting now I know that's the code 340 so you can save that code press up to save name it whatever you'd like go to save press the center button it's saved for later use just like this there it is wham bam your code is mine ma'am gate opens I'll wait all the way then I'll shut it again and that's it Brute Force sub gigahertz using the flipper zero

Channel: PenTest

Views: 6,735

Keywords:

Id: SFcVJr6535M

Length: 3min 21sec (201 seconds)

Published: Fri Jan 05 2024