Sad Subaru Sambar now sounds SPICY and looks spectacular!

oh yeah I uh I replaced these Rusty chains holding up the tailgate with some stainless steel so we don't have that problem again because there's no bueno [Music] thank you [Music] no freaking way you guys gotta see this I have not looked at under this engine cover since I got the truck this like what you typically expect just Dusty but we got a stowaway now I'm not sure if that was from here or from Japan it looks like it's been there a while it is I don't know where it came from but we're gonna see what my cousin can resurrect it and see if it had just a little Pidgey or something like that a Pidgey [Music] oh yeah [Music] foreign [Applause] [Music] the headlights after I you know did all the dice dip and all that and I just found a nice little feature if anybody you guys are uh on the fence about buying one of these things this headlight cover over here it's got a built-in nut chiller yeah so go buy one so I just got this uh painless dent repair kit from Amazon it's like a 97 piece kit for like 50 something bucks so uh I don't know how promising it's gonna be but we're gonna attempt to pull this dent and then if that works we're gonna tend to pull that monster Dent up there but I've never done this before so enjoy watching come here [Music] hear me [Music] all right the budget paintless dent repair worked out okay I mean it's better than it was I did pull some paint off but that's okay skim coat of Bondo some touch-up paint and it's gonna be a billion times better than it was all in all not bad for the first time using that kit and I didn't break any Clips even though the reviews all said that the clips break I don't know what they're doing but I didn't break any and I was pulling really hard on the slide hammer obviously to the point where I took paint off anyway uh Bondo and touch up all right so oh wait hold on anywho I broke a bunch of these little bumper Clips on the Subaru truck they go right there and right there and there's two on either side but I snapped two of them on the way out so I 3D printed new ones I mean basically the same thing but slightly different design that makes them a little bit easier to remove because I put a little what do you call it access hole to release the tab it's perfectly I also 3D printed the other half of them that go on the bumper even though mine are okay but I figured I'd have the prints ready for in case they have a break or if anybody needs any let me know I gave it to you for a reasonable price Maybe and I also finished uh touching up bundling this I need to get better paint though the white is too stark white this is just faded but it's a lot better than it was because it used to be pushed in like I don't know a good inch not bad next bumper back on and bed liner all right now that we know that these 3D printed Clips fit nicely I went ahead and printed a couple more so that you know they're all brand new and fit properly and then I also cut out some vinyl very simple design for take off some of the vibration take off some of the slack there we go vinyl applied stay bam secure all right let's throw the bumper on [Music] foreign [Music] foreign [Music] yeah yeah [Music] so we need a battery cover because none of these all right so so far what I've seen none of them come with a battery they're all missing because and they're all plastic so either they broke or somebody took them for their own truck but whatever um I had this well what used to be like a food service a serving tray or like what you see like a buffet or whatever but it's heavy gate stainless steel and somebody left it behind when we bought this building so we're gonna try and make it a battery cover I was just going to use the sheet metal and work it but it actually is like perfect size so I'm just gonna use as much of it as I can make some brackets make it tool-less removal in case you get to your battery quickly you know emergencies jump start whatever Tada and it's got a latching mechanism well let's see oh yeah she ain't going nowhere secure um all right and then all you do is line up the latches on the inside kind of like a completely where like that foreign [Music] [Music] thank you here we go [Music] thank you hey everybody it's been about a month now that we finished restoring this little guy behind me and I apologize for not posting the video yet but we got a little bit busy and I started daily it to kind of do a Shakedown and we found I had a really really bad stutter um under acceleration it turned out just to be spark plugs so if you got a little K truck that just under acceleration is stuttering like uh idling is fine constant speed is fine but when you push the pedal it starts to stutter doesn't stall but just stutters change your spark plugs uh we also went through and changed the oil filter it changed the air filter you know all the general maintenance so she's good to go now um she's a little dirty right now because like I said I've been dealing it for about a week now or two weeks but it's done she drives great sounds amazing and we're actually going to put her to work this morning go do a run to Home Depot so let me strap up the GoPro you guys can come for a ride with me see what it sounds like Welcome to our new GoPro video angle wait let's see the front camera oh that's sick what's up people what's going on with the surge for getting us to go bro thank you so much thank you for better video quality and more angle [Music] foreign [Applause] [Music] thank you [Music] foreign [Music]

Channel: GreeceMonkeyz

Views: 27,629

Keywords:

Id: be-aHZq4wkQ

Length: 14min 54sec (894 seconds)

Published: Wed Jan 25 2023