Raspberry Pi 4: Humidity and Temperature (DHT22) Setup (No coding required)

[Music] hi in my previous video I showed you the usage of wrasse controller in this video I will show you how to connect a dht22 the humidity and temperature sensor to your raspberry pi and use the rest controller to view the output on your Android phone for this video here are the hardware parts that you need Raspberry Pi board breadboard dht22 RM 2302 humidity and temperature sensor 4.7 K ohm resistor male to male and male to female jumper wires this is my pin diagram for three pin sensor you can follow this diagram if you have 4 pin sensor let me show you how to connect the sensor to Raspberry Pi following the diagram [Music] [Music] once wiring from your Raspberry Pi and sensor is completed you can now boot your pipe on your Android device install the rest controller app open Google Play and search for rest controller then install once installed open the app to connect to your raspberry pi scroll down and press the humidity and temperature sensor [Music] select the GPIO pin of your sensor then select dht22 you can now press the Refresh icon you should now able to see the temperature and humidity on your area without any coding on your Raspberry Pi that's it for this video if you liked this video kindly support this channel by hitting the like and subscribe button thank you see you in my next videos [Music] [Music]

Channel: The Byteman

Views: 11,221

Keywords:

Id: 4C1sa__-dzg

Length: 4min 13sec (253 seconds)

Published: Thu Jul 02 2020