Railing & Concrete Mount Installation

today I'm going to show you how to install on our certified vinyl railing kits as well as a coterie mount until we've already have one sole on this side let me demonstrate how to install the concrete mount as well as finally we're going to start by installing our leveling plate as well as our concrete mount first thing you'll do is trace around the leveling plate also marking where you're going to need to drill your holes drill your holes in the concrete we use a 1/4 inch masonary bin the next thing you'll do is take your leveling plate place it over the four holes you just drill take your post mount place it on top install your concrete light then go ahead and tighten them down once you tighten your concrete legs down you can use your leveling bolts to make some minor adjustments we're going to use a post level day to make it real easy to make these adjustments actually have your concrete mount properly installed you can install your guide blocks take a cop guide walk that it's the appropriate height for your railing and go ahead and screw it tight using these provided screws take your vinyl sleeve and go ahead and slide it over the post mount the next step is determining this between the your mounting service and the bottom of the bottom rail and mark your post where the bottom of that black bracket is going to be that's using soldier vinyl sleeve and major market for the bottom black racket you install your poster next step is to install the toe kick to find the center of your rails make a mark and go ahead screw your toe kick in place after you've solved your toe kick don't forget to install your toe kick plate you're now ready to go ahead and assemble your railing section you'll want to make sure the large opening on the aluminum for the top rail is facing downward now they have your railing section assembled let's go ahead and slide the black mounting bracket over the rail once you have your final railing section in place you can go ahead and mount your black bracket to the post as well as the rail to your black bracket ensuring your screws are properly seated into their position now that you have your brackets and rail properly installed you're ready for your bracket covers once your bracket covers are installed go ahead and stall your post cap and you're all done

Channel: Weatherables

Views: 99,738

Rating: 4.6482086 out of 5

Keywords:

Id: 3rKSqgQWREk

Length: 3min 31sec (211 seconds)

Published: Tue Jan 17 2017