Stair Installation Tips

here are some tips for installing severe weather Rail stairs first measure cut and place the post sleeves then measure cut and place the bottom rail it's important to mark the cut angles carefully then match the bottom and top rail for ballast or holes length and cut angle assemble the stare angle brackets they slide on then once again mark the angle and length of the stare angle brackets and do this carefully then double check andrey measure the steering angle bracket to make sure you can fasten properly to the post you must be careful to adjust and then cut the stare angle bracket so that the screws penetrate deeply into the post here's what it should look like when you're done you adjust the brackets so they'll fashion properly after you make your cuts you you can see here how after you've made your cuts stair angle bracket will fasten to the post properly then slide on the base molding you and then mark pre-drill and fasten the rail yeah with the bottom rail fastened place the balusters line up the top rail and mark pre-drill then fasten top rail place the caps and you're finished the key takeaway is to mark your angles properly and make sure the stair angle brackets are cut and positioned properly so they can fasten to the posts securely you

Channel: compositerailing

Views: 201,610

Rating: 4.6313362 out of 5

Keywords: severe weather railing, composite railing, installation, DIY, Do It Yourself (Hobby)

Id: Zfw4ooF_uIg

Length: 3min 56sec (236 seconds)

Published: Tue Sep 18 2012