MOST BEAUTIFUL PC EVER BUILT, period! 👉 Change my mind! [14600k + ProArt 4060ti 16GB]

this underneath here is something seriously special now usually I show you what we're going to be building this time no you're not going to see it because it's absolutely gorgeous it's the nicest PC I have ever built on this channel hands down and I'm also going to show you how you can actually save money and a lot of mistakes I'm making on purpose so you don't have to when building this PC one day when we sell PCS on our techn store.com I'm hoping we're going to sell PC like that I you can see this leg is one uh big giveaway what this PC is going to be looking like Amazon music unlimited I'll give you the best news from the GetGo if you sign up for the Amazon music free trial through the links in the description below you don't just get one month free trial not two not three but 4 month free trial of Amazon music this is limited time only so act fast through the links in the description below so Amazon music has over 100 million songs and podcasts so whatever you're looking for they've got it listen anywhere offline and online ad free now you can also use your Alexa devices to voice command ask Alexa to play any song or podcast you want we find it especially convenient when cooking in the kitchen so sign up for the free trial right now through the links below and get 4 months for free limited time only so act fast so we're going to start with the motherboard this is the proart B7 60 Creator now this is the B chipset of the proad motherboard there is a few versions of this exact b760 there is the creator one here then there's Creator Wi-Fi and then there's Creator D4 D4 means dd4 so if you want to save some money and you have a lot of ddr4 lying around go with ddr4 this one is ddr5 but without Wi-Fi but I would actually recommend the Wi-Fi version if you're going to go with this motherboard because Wi-Fi and Bluetooth these are the things that you really want to have built in with your motherboard because when you're expanding or adding them it's not so good because you're actually going to pay more for it if you think about the price for included in the motherboard you'll usually get a better one but the only downside when getting motherboard that's got it built in the Asus ones you can change them gigabyte and some other manufacturers uh have like an actual Wi-Fi chip that you can replace you know to upgrade Wi-Fi 7 for example in the end but on Asus you can by the way when you buy proad products from Asus you actually get well they don't say that in here you get 3 months Adobe Creative Cloud for free which means that if you already use the Creative Cloud every month you have to pay $60 or something like that anyway then now for 3 months you don't have to pay when getting this one and this is why I actually got this motherboard because I thought I'm already using Creative Cloud I looked at this motherboard on Amazon and I thought if I take the Creative Cloud off this up motherboard is going to take like cost me about $20 or something like that and to make a video about this I thought it's worth it the awesome thing about Asus motherboards is it looks so beautiful I love this black and gold design I think this is like one of the best designs you can have um on a motherboard it's absolutely gorgeous and as you can see on this motherboard uh you actually have a Wi-Fi slot in here and the to Wi-Fi and Bluetooth card so you can put it in here I believe if it's built in on this one maybe not either maybe it is let me double check yeah it's true if the Wi-Fi is built in then it's actually going to be on the side there and you're not going to be able to change the Wi-Fi card because it will be solded onto the motherboard but this one you can add it here and perhaps that might be good because if you do want Wi-Fi 7 you can easily add this one in here so think about the motherboard Choice when getting the motherboard perhaps you even want the z790 version of this because you'll have more M2 slots you got Wi-Fi built in you've got 10 GB e in it when you add all these things together minus the Creative Cloud membership the z790 might not even cost that much that's one of the big differences about Creator and gaming motherboard is creators might actually need to spend a little bit more on the motherboard because they do need more M2 storage they do need the fast connectivity and the ports um that's the more expensive motherboards offer let's get our CPU installed for the CPU we're going to be using the 14600 K and if I was you I would not do that and you might be saying well why you doing that if uh you don't recommend other people to do that well there's a very simple reason for that the 14600 K and the 13600 K they have like few per difference between their performance but there is not a few per price difference the price difference is much bigger so my recommendation would be skip the 14th gen like that's the golden rule for 14th gen skip 14th gen don't buy 14th gen but buy 13th gen the only one that kind of is reasonable and may be worth considering is the 14700 K if the 13700 K is very close to the price of the 14700 K because 14700 K actually has core increase II 14600 K and 14900 K have no core increases so actually getting that you're really going to get like 2 3% performance increase maybe or maybe not there's hardly any difference but we're going to be using this so that you don't have to make that mistake next of all for Ram we're going to be installing something absolutely beautiful this is the team group tcreate expert ddr5 and I have here the 64 gigabyte modules so you have two 35 gigabyte sticks they also offer a 96 gigabyte kits and when you get them you can actually get 192 gabes in total if you need that as a Creator now obviously Gamers don't need that and that's why this is a lot different for creators but there is another thing to consider now as you can see this Ram kit runs at 6,000 megga transfers per second and if you install just 64 GB it's completely fine when we install 128 GB there is a 90% chance I'd probably say 95% chance that you're not going to be able to run them at 6,000 mahz now you might be able to if you get a very good silicon Lottery and you um you're able to just run those at that speed but most likely you're not in my experience I'm running the 3900k I am running 12 8 GB of RAM and I'm nowhere near 6,000 megat transfer per second the IMC of 3900 K or the 13th gen is Right rated at 5600 megat transfers per second but I'm not even getting that I might get a post but whenever the ram capacity fills up when I'm actually using it in premere Pro it just crashes and the ram is not stable at that speed I have like found a stable speed at 5,000 megat transfers per second with 128 gigabytes so when you're buying these kits and you see the fast speeds and you think oh I'm going to get 128 GB 192 GB and I'm going to run them at super fast speeds for example if you look at the 96 GB kit it offers 68 megga transfer speeds which is even faster speed you think wow I'm going to get 192 GB with 6,800 megat transfers per second speed no you're not if you have two dim sticks or like two channels installed so perhaps you only need 96 GB then yeah you might be getting 6,800 megat transfers per second but with four sticks the motherboard has to split the channels and you're not going to get that so my advice here would be don't spend loads more on a ram that has fast memory speeds when you know you're not going to run them or just figure out a two dim kit that has the capacity you'd want because then you will be able to reach those speeds but right now we're going I get these bad boys beautiful things installed look how nice they are like they just fit into this I think they must have like go design them cuz look the gold is very very similar gold and all that so these are going to go get installed here oh yeah baby how beautiful does this look if you don't like this there's something wrong with you please we need more beautiful beautiful um PC designs like that now when removing this M2 it's like slightly awkward because it goes kind of underneath there as well a little bit so for the top Ender two slot we're going to be installing solid p41 plus so this is one of those uh drives that's actually very very affordable 1 tbte single sided I should actually get a little um sticker a square sticker from the motherboard box to put it in there because when you have a single-sided like there's nothing underneath here this would actually prevent it from bending but you know you don't make that mistake you do that I am going to make the mistake all right but getting this is not a mistake this is a very good like a pget uh kind of mid-range Gen 4 nvme has very good random read and right speed so it's good for OS perhaps not so good with some of the um project drives but still good in terms of the price but if you have a project drive and you're handling massive files R you know lows of random and big files sequential read and right speed this might not be the best by 4our strive it's AB absolutely fantastic for the project Drive we're going to be using Samsung 990 Pro which almost seems like I'm doing this upside down and in a way perhaps but it does make sense because the 990 Pro is very good at keeping the speeds when fully utilized and when you have uh big files and it's got very very fast speeds so it's a great project drive as well as um OS drive but I think the solid dime for the price is much better here so if you want like a more affordable OS Drive highly recommend checking out p41 plus or the p44 pro that's even better than the Samsung 990 Pro you might be saying why why don't you put the drive in there well firstly because there's no heating on top and I'd like to keep my M2 cool but also this slot in here is PCI gen 3x4 so I'm not going to get all the Samsung 90 Pro uh speed in there now our motherboard is pretty much ready now what we have to do is actually get the cooler prepped in here so we're going to put the back bracket and the cooler ready but we're not going to be installing the cooler because we'll have to get it into the case first which is so for the cooler we're going to be using the lean Lee gahad 2 LCD SL INF 360 mm cooler okay the fans are pre-installed now that that's very nice this cooler has a lot of different cables but firstly we're going to take this back bracket for the [Music] cooler going to slide that in in there and then inside the thermal paste bag there are four washers the good thing is you're going to get extra thermal paste for new application there is actually thermal paste installed as well push those washers down there these wash is actually going to keep the back bracket there so if I lift up the motherboard up it's not going to fall off from the back when we put it inside the PC case when you installing this particular cooler inside this case you're going to have to install this in the front you can't put it on the top because the top only supports 240 mm radiator but I want a better cooler so we can use the front in [Music] there the backs off and the glasses off now here's the front you just pull it from the bottom the whole thing comes off behind here is a mesh for a dust filter so if you want to clean it it comes off easily we're going to take these out and we're going to install our own fans now you could just use a different cooler if you've got an air cooler these are pretty good included fans but uh there's something extra that we're going to do if you see the way these fans are installed in here if we would be putting this cooler in there with these beautiful side kind of infinity mirrors with the RGB in there you're literally going to just ruin the RGB effect and even though I'm not a big fan of RGB I think you know getting a tasteful RGB is always good so we're actually going to be taking these fans off this cooler and we're going to be installing them as exhaust on the back of this case for the actual fans that we will be using for this cooler are these lean Lee p28 UNIF fans but I'll have to check if I can use them before I can do that I'll have to remove the fans in there and also very important what I've seen some people make mistake online is this side panel here is very nice but if you trying to put your GPU and things in it's kind of awkward this actually comes off as well there's a little screw on the top there just one and if we just undo that now this panel slides this way and then out voila and you we've got more space to build in let's take those included fans [Music] off now if you wanted to you could still use these fans because you can put them in the top as an exhaust fans black you're probably not going to see it as much as well they're nicely exhausting from the top if you wanted to save a little bit of money of getting extra fans if you just want to get fans for you know the front or something like that or if you have a 360 mm aiio take these out from the front have this in the front you'll have intake from the front and then you have some exhaust in there as well the back fan is only 120 mm compatible so a fan that goes in the back here it can be only the smaller one now here's what I need to test in here is if I can actually fit the 30 well these are not 30 mm these are 28 mm fans they're a little bit thicker than normal fans I I am not sure if this is going to fit because I'm not sure if you can see it from this angle uh there is a little bit of a lip so let's see if this goes in there ooh it does actually go that is really good news so we can use them which makes me think can it tolerate extra 2 mm because these are 28 mm but then these fantex t30s are 30 mm so let's say we put these fans in there is this going to close I'm not so sure it is actually going to close I mean it is kind of tight but it still works should we use the fantex t30s yes we're going to use the fantex t30s because you're not actually going to see any of the front there so having these you know kind of gray fans is not as bad now these are much nicer as well but I think we could get even better with these fantex t30s these come out together just like that and by the way we can't use these same screws for the radiator because the fantic t30s they'll have to go in the front through the fan through the frame onto the radiator and these aren't long enough these aren't even going through the fan because they're 5 mm longer so here's what we would be measuring is if the tubes would be down would it fit let's say our radiator would be there would we fit in there yes we would fit in there but our GPU is that going to fit or not now let's try that straight away for the GPU we're going to be using something special this is the proart GPU lineup and um you know if you actually saw this over here a little bit peeking out you can see 60 gigs of you know memory but then when I take the whole box out you realize 4060 ti What on earth that's an absolute scam 460 TI was anyway 8 GB at first why is this 16 GB and is this actually going to make a difference in performance well that we're going to be tackling in a different video but one of the main things about this GPU is it's beautiful and they do 4070 4070 TI and 4080 all in this form factor they all are exactly the same dimensions exactly the same cooler I can kind of fake a 4080 in here because of the 16 gigs of VR but it's not when you're getting this most likely the 4060 TI is not what you would want to actually get because you're paying a lot more for something that you know isn't worth it although if you do take consideration that because of this proart you know brand on this you get 3 months for free so this you know GPU will actually cost you $180 roughly less than a normal 4060 TI would would be so if you're looking for a 4060 TI and you're using Creative Cloud there is a chance that this might actually make sense but if you're getting this for a creative PC I wouldn't actually recommend doing um a 4060 TI i' probably go with a 4070 TI if you can because that will have uh dual encoders in there now let me just slot this in here and see how would it look like that's uh very very nice but now our tubes have to fit over this and would they how would that feel if you put them there you see they don't fit in there so they'll have to go on this side of the GPU and we wouldn't see the pro at lower but let's see if we swapped this the other way if we put the tubes up how would it do it something like that could wrap those tubes around but the pump is very much on the bottom like the top of this cool aiio so let's see if it goes somewhere like that well the tubes are still higher than the pump and perhaps we can what else we can do yeah we probably have to wrap them around just like that but then that would cover a lot of the motherboard I'm thinking we'll go the other way just try it let's put tubes down down and then let's see if we can make it work okay now when the radiator is stuck in there we can install our GPU now as you can see there's only a tiny maybe like an inch of space here until we reach the radiator which means that you can put slightly bigger gpus but not that much bigger here's a 490 too and that would fit in there absolutely perfectly as well it's very similar size now what I'm curious about is this so this is a zort RTX 1490 which is one of the longest 1490s actually but it does have some gold accents on these uh fans which would theoretically fit into our build so let's see if the 490 would fit if we had a front aiio nope as you can see definitely no chance 4080 from Asus would fit the nocto version because it will be a bit shorter and longer but just be careful when thinking and choosing the GPU for this buildt in this configuration we have about 32.5 mm for the GPU length to go here but I do believe our lean Le radiator is a bit thicker as well so that's 30 mm thick rad because this GPU is so skinny um I don't see any sag or any sag issues that would be there so next I'll be putting the tubes down just like that for the cooler seems like it's going to fit and it's going to be all right there because my 14600 K is used I'll just do a little alcohol wipe on the top in there and you can see on this white paper there how much actually some mck is in there you might be saying oh you're going to get all those little fibers onto the CPU well not really because after I've done that what I'll do is take a microfiber cloth something like that and then just wipe all the fibers off just making sure that our tubes are down that's how it's going to go there we're going to take the plastic cover off fil paste is already installed as you can see in there I hope this is going to be enough and it's going to be good because it's going down doing a little wiggle wiggle to get it stand there and where did I put the yeah [Music] we'll deal with these cables later but what comes next is something more exciting but look at that it's all going to look so good and when we put these Le and Lee fans in there as well what will happen is that's going to Glow a little bit of inside there and we get a really nice look oh oh this is going to be so good oh man it sound like Mark weans when eating something oh wow yeah oh that FL is amazing which makes me really hungry as well so I have some golden PSU cables here and uh these are from cable mods and you can design them yourself and you know choose which ones you want and how you can get them but uh some of these are quite custom made so for example I've got the ATX power supply cable that's going to go through there oh wow oh wow oh wow let me tell you this much does that look premium or what there's another six pin pcie power in there and for that I have another cable here then the top CPU powers are eight pin and four pin I have actually made this one here I think this is from our X 570 Pro art build uh that's got quite a lot of views actually that's was one of the first videos that uh went Kaboom on the channel in terms of PC builds and there we use this one but because they've used exactly the same connectors so so we're going to try to get all of that in there as well so they go through just about there and make sure you put these cables in before you put any fans on the top there because it's going to make it very very difficult well that looks beautiful there as well but then because I thought I was going to use or get the 4080 for this build um I actually ordered the 12vt high power cables and as you can see I've got one that has two PCA 8 Pin headers on the other side so if you have a power supply that has just two of these you can put in this one there or I also have another cable here so this is the 12vt high power cable on that side but then on the other side we have four of these cables they should have different Power delivers 1 1450 and 1600 if I'm not mistaken but because our GPU here uses just 8 Pin PCI cable um I don't have time now to get another eight pin there I have this dual 8 Pin one that we also used for the x570 pro OD build but this is two I build eight pin and what we're going to do and I realized they've actually left a bit of space here in the heat sink there's just a hole in there for the secondary power connector that potentially can go there so we can fake this which you shouldn't do but I'm doing okay we plugged one in and I'm just going to slide the other one just underneath there and if I put the Combs right very close to these up there you are not even going to notice that anything is different okay right so that goes beautifully where should we put it down hm from there or from there perhaps down there then it goes all directly straight down that looks good it's fake but it looks good later on we're going to put techn this logo there in gold as well and then oh this is going to look so so so beautiful now what I recommend to do is Cable Management like plug in all the necessary cables for everything you need and then install the fans last because it's going to get a little bit tight once your fans are there you can't really plug everything in there so we're going to do that [Music] now okay that is slightly annoying that if you don't want to use use these fans on your AIO there is actually no way to connect those fans um separately what I mean by that is everything that's in this kit for the aiio is just to use in an AO configuration so once you separate these fans because Le and Lee has got their own connectors here to connect those fans as you can see there's uh six pins that go into each other and now all the fans they share like the LED stuff and fan curves and everything once you take take this fan off there is no way to connect anything to this one because all the cables that came with this AIO here they are just for literally only for this so now this fan becomes basically useless I can't use it unless I buy a separate um a fan or like a connector that can connect a cable between this cable and this fan and this fan so I can put the single fan in the back but it would connect to the top there so so that will be the only thing what I might do right now is actually just leave the back empty don't have any fans in there but just have the intake from the front and then out from the top with just these two fans going there so one more thing to do is the power supply and for that we're going to be using this be quiet dark power 12 850 watt but what's very special about this one is 80 plus titanium which means it's going to be very very efficient and as a Creator if you're using the PC 24/7 um and leaving it rendering for a long time then having a PC that is very power efficient is absolutely amazing because it will pay for itself in the end because of the energy prices they're going up everywhere so if you do want to save some money at as a Creator then this is very very nice now look at the design of this this is so minimalistic so nice I mean surely this is going to give us extra uh you know FPS as The Gamers might [Music] say now I just realized I've got a b760 motherboard which means that my mother mod might not even boast because I've got a 14th gen in there and because of the 14th gen I have to update the BIOS it doesn't have bios flashback so don't make that mistake either but we'll we'll see what happens maybe by some miracle um it's going to go through but um I doubt [Music] it so the PC is built and as you can see it looks absolutely amazing all the black and gold and this dark wood it makes it look like it's Channel themed it's like all my channel theme I mean it looks absolutely um amazing if you want to pick out any of these parts I'm going to leave the links in the description below but a few things when you're building the PC um what maybe you should know or some tips that I found while building this number one the 14th gen is an interesting thing because even though the BIOS should not support the 14th gen because that version of the bias is quite old like early early in 2023 when 14th gen wasn't out and not even announced nothing out there yet but it actually just slots in and the bias just recognizes the 14th gen voila there it is which makes me think that the 14th gen really maybe isn't anything new well surprise surprise and uh it's just kind of like a 13th gen but the bias just pulls information and See's 14 600k so that's what it is even though it's kind of 13 600 KS we'll see in a moment how fast this is secondly the aiio pump actually makes noise and this is something that I haven't noticed with any of the other aios that we've tested on the channel not as much as this one and it seems like the pump noise goes a little bit quieter when I'm moving the tubes right now it's on idle and the pump is actually on on a curve as well so it's not going full speed on a curve but when we do the cine bench test in a moment then you can hear the bump a little bit more I didn't recognize the noise on the performance version of this cuz this is the galaad 2 this is LCD version but the performance version I didn't notice that in there so I'm not sure what's going on also if you're getting this and the screen is not working for you you might not have the USBC properly plugged in you have to press it quite hard until it clicks in and then it comes on at first I thought why is my screen not coming on but that was the issue also the screen and the pump design here looks really really nice and minimal as well usually you'd have something like a weird shape as well this is just a nice Square block with little lights on the side that I've put to kind of circulate gold and yellow as you can see and this on the top there really makes it something special and you can put anything in there you can put a little video in there if you wanted to you can go and I'll show you in a moment what we can do on the Leon Le L connect in there and the last thing is I didn't put any fans in the back as you can see see and I'm quite liking the design I'm not sure what you think but this looks really really good to me actually um but there's no fan in the back we just get this nice kind of an open back and everything's lit in there and the golden cables from cable mod really really nice feature there so let's take a look how good is the cooler and if this actually works here so let me adjust this down here I've done the single cor score which is 116 on cinebench 2024 let's do the multicore score can you hear the pump now 203 wats with i54 600k that's pretty insane can you hear the pump noise now look at that we're pulling 200 Watts there from with this uh CPU the I5 14600 K that is uh pretty insane I don't think we got that uh much actually when we tested the CPU so this is earlier version of the BIOS which actually pushes it much more than perhaps the later versions and it's going to drop the wattage I mean the fans are doing great work in there they're pushing a lot of air through there you can feel the air being pushed through the radiators there quite a lot of air flow and right now I've got a side panel open so perhaps I'm actually ruining the air flow rather than pushing the air flow through there oh yeah that's pulling a lot more power than it should it's pulling 202 and I'm looking on the z790 motherboard with the newer version of the BIOS we were pulling 170 wats so that's extra 47 Watts which is insane amount of power what we're pushing through there now I want to see if we're actually getting a higher result because of that okay we're doing a 10-minute run then well right now it's 1 1255 let's have a look at the clock speeds the P Calles are going 5.3 and then four on the E calls I'll just stop this to get a single core in let's do one just in here now single one 123 172 84 w boosted there 200 WS on I5 let's take a look at the results really impressed with these fantex T30 fans how much air they actually push through the radiator you can really feel the air going through the radiator as you can see our core temperatures are 68 on average what's the peak here 7779 with 200 WS pushing through it seems like 200 wats for this aiio completely fine look under 80° here and there's 25.8 de in in this room 1277 which is actually quite a bit lower than our 14600 k um on the Z 790 we got 1384 13600 K is 1347 12 700k is 12 46 so we're getting roughly around 12 700k performance I want to show you how much updating the BIOS actually means in terms of performance so I've got a new bios in here right now so all we have to do now is restart hit the delete button there we go okay here we are in the Bios and the BIOS version is 0203 and where is the date for this bios again if I went to Advanced was this here uh yeah bias version and the build date is is 3rd of March 2023 so that is definitely not the latest so what we're going to go here is do tool Asus easy flash here and yep so this one is my USB stick proad b760 Creator cap do you want to read this file as you can see we're going from 0203 to 1501 which is quite a few versions and now this is the 6th of October so about about 6 months later I wish there was an option to keep the screen on even when the PC is not in on Windows um CU right now the screen is just you know the basic one we don't have our logo in there so it's pulling the data actually from Windows okay as you can see we are back in BIOS and we've got the new BIOS version there 1501 I'm going to put the XMP on I'm going to go here the XMP is not going to run at 6,000 Mega transfers per second that is very optimistic 5,000 that's where we're going to put it Advanced system GPU enable and go and now it's going to train the memory again interesting I have to load the new me firmware so now it's not updating the BIOS but it's loading the new me firmware so interestingly it doesn't let you to go into Windows first before you do that just so you know when you're freaking out why is Windows not coming coming up so you have to like press the same file again the exact same file like update the BIOS but now it's um putting the new firmware on which is interesting okay new bios F1 let's do them again here we are in Windows and let's do exactly the same test multicore go let's take a look at this now 190 197 199 a few WS less still so interestingly the b760 is actually pushing a bit more power through than the actual z790 on this 14600 K very interesting so looks like the BIOS chains didn't do much on this one now which I'm very surprised about actually but now then let's take a look how good is it in other applications I've done the dent resolve uh puug bench Benchmark here and this is the extended with W resolve 18.6.18 so you can test it and compare it to your system 2173 on the extended and 2463 on the standard overall score the fusion score interestingly is a little bit low probably because of the 4060 TI but it's quite an all right score slightly on the lower side I think the GPU could be a little bit better because the V resolve really likes to use all of this now for Premier Pro this is a benchmark 1.0 from buet bench and we're using Premier Pro 24 you get see overall score 9,127 and extended score 7174 so now this is the new Benchmark from bu bench um they have something called the buer bench for creators and you can download this app then install your you know Creative Cloud applications right now Photoshop and premere pro are available over there and you literally can just do everything together in this one application without opening all the different apps which which is very very nice so I did them over here and you can see that now they're finally version 1.0 benchmarks after effect Lightroom and devent R aren't available yet it will come here as well but this is um quite an all right score there and because this is the new Benchmark version I can't really compare it if this is a good or not good score so if you have done this with your system uh let me know your scores in the comment section below as well as some of the specs of your PC I'd love to know how well this 14600 K with the 4060 TI performs so let me know in the comment section below then on Photoshop we got 7,289 score and now we have the general score and the filter score in there as well again not sure how good this is let me know in the comment section below your scores and your specs that would be awesome and in After Effects we got 1196 points multicore is 166 this is actually very very marginally slower than the 13600 K with an RTX 1390 so that's interesting now I know that this PC isn't uh particularly you know awesome in terms of the specs but we did some of these you know mistakes in specs on purpose we should have had a much faster GPU we should have one cable in here we shouldn't have 14 600k we should have 13 600k maybe we'll have a better motherboard as well but one of the things I wouldn't change about this PC are the locks now you can get the same thing things but just higher spec same looks that's what I would kind of get and that's it if you wondering what are some of the best bang for Bok creative PC parts like in terms of the actual Hardware that gives you performance then check out the links in the description below for those builds now if you want to change any of these to these over here then feel free to do that apart from the 1490 it's probably not going to fit in there some of the 480s will fit in there so depending what GPO you're using you might not be able to fit anything in there that's about it if you enjoy the T-shirt I'm wearing you can see that U just underneath the video you'll probably notice it's somewhere over there different colors available techno.com and [Music] bye-bye

Channel: Tech Notice

Views: 101,646

Keywords: tech notice, black and gold pc, 4060ti 16gb, 14600k build, creator PC, most beautiful PC, black and gold theme pc, proart pc build, video editing pc, photo editing pc, creator pc, black and gold theme creator pc, 4060ti 16gb build, 4060ti 16gb proart, proart gpu build, b760 proart build

Id: BS68_MXZID8

Length: 41min 18sec (2478 seconds)

Published: Sun Dec 17 2023