Mikrotik PPPoE + BandWidth Management

regarding pppoe server configuration plus bandwidth management requests on for this tutorial we we use default configurations foreign okay i got auto reconnect the minion so once another connecting client and default configurations okay then reset configuration so see simulink from the start oe server router os default configuration click okay youtube [Applause] bridge router okay filter rules default configuration filter rules young for security reason and young wireless okay sorry wireless and by default configuration wireless password so we need to set up the wi-fi interface of our microtech comeron then regulatory domain set language philippines okay then security for profile sets are default [Music] attack [Music] a win box then we'll go to next step next is maxi satin on port or bridge for pppoe for this tutorial uh bridge anga govinka for pppoe bucket bridge mona [Music] okay then next we will make an i a pull address for our pppoe so ip pull then add dial [Music] 100 then apply okay so after nothing starting pppoe we will create a mongol rule to mark connection and pocket firewall mangle better before i create a mongol rules for our gamete pppoe q3 bandwidth management be sure a default configuration is disable or remove you see fast track connection so re-remove nothing back then reboot then connect so for this tutorial if you want to improve the configuration for a for for this tutorial i use forward chain then young connection bytes 1mb to infinity connections 8 100k so not uh nothing young big connection big connection in yes apply okay then okay okay so maranathaion connection for big connection then next we will mark the pocket for our big connection then we use forward chain connection mark and big connection then mark pocket and big pass through uncheck no then click ok then next we will create a connection for our small connection then chain is forward [Music] connection mark big con then not is not opposite yeah then action is smart connection small con pass through yes then we put a comment small gun small connection then click okay okay and then we will mark a pocket for our small connection and then we will configure pppoe server and client profile username [Music] [Music] by the rain that uh for this tutorial launching that nothing is ppoe bridge at all then max mtu we will set the max mtu to 1 480 max mru 1 480 and guys and then check young one session per house by default this one is one for 60. i recommend s1480 gamete [Music] [Music] profile okay so profile detonator set dns change tcp mfss uh click yes then detonation script soma mayan mbps username and password nangniyon client username for example client one then password one two three four five for this tutorial then service peleon testing for this tutorial next step litena it was a 10 mbps okay and sub profiles then script up so 10 mbps 10 mbps max limit then fedex mbps mark 10 out we so on login so pipe mbps profile nato so we need to edit the script so young max is 5 m 5 m long then priority padding arena then next young lag out okay apply okay secrets uh client one by going password about nothing one two three four five six seven eight then client two same router i have uh connected router so gagametina paracommon exacting ppoe pppoe then 3 okay [Music] pppoe [Music] okay without you arching old router with ip address 192.168.2 that one okay we will set this router paramacha connects i think pppov [Music] [Music] sorry okay pppoe then you adding username is client1 password is one two three four five six seven eight then save over there the connections are using 10 mbps disconnect nathan sha disconnect [Music] so velasha then we will connect using client2 so client tournamental with same password then save [Music] so status then connected sha using pipe mbps connected

Channel: Marcopolo

Views: 4,878

Keywords: MikrotikPPPoE

Id: hikOv6_oObU

Length: 32min 5sec (1925 seconds)

Published: Sun Apr 04 2021