Installing The Snap Lock Baluster System

[Music] one part is actually installing all these little bass parts what I've done is I've measured from the center at four and a half inches and Mark the two by four on the bottom and also on the underside of the top 2 by 4 again these have little gripping cones which you will run along the imaginary center line of the 2x4 and I just placed this so that I can see the line underneath through the screw hole and square it's sort of centered right nicely on that top of that 2x4 tap it so that it grips take my screw and we repeat the process it's that simple and that's that once you've got all these bases in place top and bottom you ready to come along with your balusters which just snap in like that it's a really very cool system but before we do that we're going to take our decorative covers slide them on make sure that the male tongue is facing the female opening and that's it and it's rock-solid there's no vibration nothing just it locks it's like a like a friction lock and you'll actually hear it snap lock when you're done so we'll go through there and show you how easy it is you really have to experience this to get an appreciation for as fast you can do this whether your one-man contractor operation whether your weekend warrior do-it-yourselfer or whether you're my seven-year-old daughter who I used as a test subject when I developed this product so that's a snap-on lock system we're we're pretty excited about it I hope you are too and that's all you need to know about that [Music] you

Channel: DecksGo

Views: 59,869

Rating: 4.7180614 out of 5

Keywords: snap lock baluster system, snap lock balusters, baluster, kit, deck railing, balusters, aluminum balusters, baluster connectors

Id: VGKX7uvqqgc

Length: 2min 25sec (145 seconds)

Published: Sat Oct 21 2017