INSANE resin table - $4000 Warhammer in 75L resin

it's been 12 months in the making and we're finally ready to do something that not only I have been dreading but also you guys this is the week where we make a massive resin pour on the world of Taipan diorama and in case both of the warlord Titans inside of hard plastic [Music] it's been such a long process but it's finally time there are so many things that can go wrong for one you can have massive wrestling leaks all over the office that's never happened extreme exothermic reactions that surely hasn't happened it can become so hot that the resting cracks not only just the resin but also the figure and burns the colors but even worse someone can get poisoned from the fumes of the resin so I'm gonna have to figure out that or even worse it could just get ugly like the organ looks like [ __ ] but I think we're ready to start let's build a frame and then get to pour it [Music] foreign [Music] we've got the plexiglass all in place and the first thing we need to make sure now is that we don't have any leaks because leaks and resting Force but we're gonna take every precaution we can so we're gonna use a bunch of this really nice UV resin sort of do it all around the edges and make sure there's no possible way of resting seeping through the cracks between the Plexiglas and the aroma itself is [Music] this [Music] foreign [Music] we've done some rigorous testing of resins and the reason why we have to do it is because we're gonna do a couple of really really big pores as big as 10 or 11 centimeters and we found the by far best one we've used is this one wrestling of Sweden it is pretty much exactly four times as good as the second best one that we found because we can do about four times as deep pores without getting exothermic reactions with this resin which means that we're gonna get a super clear nice resin just the way that we want hopefully without Passover [Music] [Music] oh my God [Music] so we have a problem at least one problem wrestling has started to leak through here we also have something in here we can see there is dripping like a small drop inside of the diorama there is like two layers of protections of like 90 of it it's gonna stay in there hopefully but this means that we have a problem somewhere and with that there wasn't much we could do we had to wait a few hours to see if things would turn for the worse if we needed a drastic adjustment or if we could just let it be and hopefully it would cure eventually few moments later I've been going in here like every 30 minutes and sitting on the resin and it's sunken down quite a bit so we have had leaks of maybe two centimeters like over the entire thing but I was smart I turn on this heating fan you turn up the heat to create an exothermic reaction to harden the resin which probably saved the day I'm hoping it's not gonna get too hot because if it does it might crack but I think it just saved the entire thing I'm getting excited right now so no more leaking yesterday was an intense day I think I worked 12 13 hours keeping track of this but I am freaking hyped because this heater caused it to harden as you know but we got some cracks and they look freaking lit seriously looks like the chaos star is shooting out shockwaves underneath the water and I freaking love it we are not worried about this reaction happening with the next layers because obviously we're not gonna have 35 degrees Celsius as opposed to 15 to 18 which it's supposed to be in so we should be fine there we do however need to let it rest for 24 more hours then we're gonna go in and do a bit of extra sealing along the Mountainside so we don't have any other leaks we shouldn't but better safe than sorry speaking of heat I hope you're not missing out on a smoking hot T-shirts from this week's sponsor into the am into the am makes some of the best graphic t-shirts available across the entire internet both me and Emil wear these t-shirts all the time I'm sure you can go back into any video from the past three years and you're gonna see us wearing at least one of them at some point in the video that's because they are so freaking cool and of course they fit really well they have everything from these full body prints I'm wearing right now to graphic t-shirts and of course regular t-shirts and if you want to pick these t-shirts up there's three for 61.95 on top of that if you follow the link down in the video description you get an extra 10 of your entire purchase which means you get a [ __ ] ton of really cool t-shirts for a really low price now make sure to check out into the am and let's see what the future has installed for our rest imporce [Music] thank you okay as you know we want to mitigate leaks in the future so we figured we'd use some transparent polymer kind of silicon like glue-ish thing we've seen Luke from Geek Gaming use this in the past for water effects and it looks really good the problem is that this one does not have the same picture as the one that they sell in the UK so after trying it for a bit we're not gonna be able to use this so our next test is going to be to try to use UV resin hopefully that works otherwise we are very [ __ ] [Music] thank you [Music] what are you doing time for a small resin pour [Music] I love this I was so confident we wouldn't have any issues with this poor because we had prepped so much with silicon like again reminder this is how much silicon we used to seal this for some reason the cracks in here go all the way down so they were resting leaking through from the cracks here all the way down dripping in underneath it the resting inside of the cracks have now cured but I I want to be safe this time so we're gonna do a second small pour after we've done even more UV resin this is not fun but on a positive note if we manage to finish this now and make it look good we're gonna have the best looking diorama in history so let's just do this we're now gonna flip the four thousand dollar warlord Titan diorama who thought that was a good idea because then maybe we can add even more UV resin in places where we couldn't add it before and hopefully that prevents it from leaking in the next pour [Music] [Music] number three [Music] yeah my dudes it is getting harder the second power have soon cured which means that we'll soon be able to make the big one the Deep poor however when we started embarking on this journey we estimated that we need about 20 liters of resin which would have been quite okay about five six hundred dollars investment to do an epic project for charity I will hopefully give a lot more to people who need it but after doing our first pour we did a calculation we measured how big the whole scene is and How Deep The Pour would be to get an exact number how much resin we'd need pick a guess how many liters do you think we need it's more than 20. it's actually close to 80 liters which means that the 600 can now turned into two thousand dollars ish this video series is causing so much money please for the love of God smash like so this video gets viral gives out to new people we can keep making cool videos the resting should be here tomorrow hopefully in time for the resting to be fully hardened this is a massive project guys don't try this at home the resin is finally rock hard it is time for the thing that I'm in dreading for six months we're gonna do the Deep resin core which means that it's gonna be something like I don't know 40 liters of resin in one go it's a lot of money it's like a thousand dollars [Music] [Music] okay guys rest in pores am I right we left here Friday it looked so good it hadn't dripped out anything and then Amber came in here Saturday and we have all this it's really weird warpings it's been so hot that the plexiglasses started warping and I don't even know where to begin so I guess we're gonna have to use some more UV resin to try to seal I don't even know where it's been leaking out right now but warlord tight in the aroma not very fun we're never doing this again foreign [Music] let's see if this one fails well let's go thank you [Music] three days later we're Lifting for Dangerous wrestling in the refrigerator perfect for Friday night snacks [Music] this is the moment does everything [ __ ] up or not well foreign [Music] this video took us way more time than we could ever have anticipated we thought we'd be done in like one and a half week but now we're pushing almost three weeks but on a positive note it's starting to look so freaking good [Applause] [Music] and all the resting pores are done and just a sheer amount of UV resin use to this point is probably enough to build an entire warlord Titan and the positive thing is the next video in this series should be the last video where we finish off all the waves and make the diorama come together and look awesome so make sure to like this video And subscribe so you guys don't miss the next video in this series it's gonna be so freaking awesome [Music] a massive thanks to all of these amazing patrons you guys are truly the best also make sure to check out this week's sponsor into the am with that said have a nice day bye bye

Channel: Squidmar Miniatures

Views: 340,467

Keywords: warhammer, miniature painting, painting warhammer, age of sigmar, squidmar, warhammer 40k, dungeons & dragons, d&d, how to paint warhammer, space marines, squidmar miniatures, emil nyström, airbrush, vallejo, citadel color

Id: aSZsbzD5cXg

Length: 14min 59sec (899 seconds)

Published: Mon Jul 24 2023