How to set Valve Lash on a Solid Lifter Race Engine

naturally the in tight vial is going to coo alfalfa's okay okay so you want just the intake valves first okay what find an exhaust valve I don't care where you start if you want to you start on number one every time so you won't get screwed up okay don't matter but you go down the Firelord i that's number two okay I'm going to hunt for Nathan in exhaust that's first starting to open I see that one dip downs first starting over that's cylinder number four and start on that okay just as it starts to open now you adjust the intake valve on that soon because when the exhaust just starts to open that means this one's got to be closed exactly it's got to be on the heel of the camp and now I'm certain he's on sixteen eighteen sixteen is intake eighteens exhaust that's pretty much the field that's a little bit snow but that's what I'll i do that's tight you feel it pushing back in their field oh man yeah okay that's a little snug but it won't hurt okay now now the way it just sees I'm going to get you to do this I try get through let's say it was off and I'm going to readjust it hey loosen the nut loose in the center set screw okay there's a pretty decent drag you leave it a little bit loose let's see when you hold the nut I mean it set screw and tighten the nut it's going to get looser because you're taking out the slack and a threat we tighten up all right oh yeah now that's a little bit loose we feel it let me feel yeah that's now won't tighten that up a little bit okay put the feeler gauge back in now I'm going to turn both of them that's about like it oughta be okay that's tighter they see how I did that yes you tighten them together okay now now you do

Channel: woodsandbarclay

Views: 146,576

Keywords: How to set Valve Lash on a Solid Lifter Race Engine

Id: uVbBEMK0re8

Length: 2min 49sec (169 seconds)

Published: Fri Jul 15 2016