How to Sand and Polish Epoxy Resin / RESIN ART

1mm plexiglass we start by bulding molds for the resin epoxy resin hardener in the middle we will put a piece of paper with a print we will see more precisely to wath extent the resin is polished to start with, we'll mat the resin we will use 80 grit sandpaper for this I think it's good sandpaper 120 we have to be careful in which direction we grind we are not doing it in the same direction we grind in the opposite direction to the previous one when we sand crosswise we can see if we can use the naxt sandpaper we continue to sand with the sam paper now we can see that paper 120 has removed the larger scratches of paper 80 360 sandpaper it is fine sandpaper we use water so that the dust does not stick together and does not clog the sandpaper we can still see the previous scratches we can add clean water now is good 600 sandpaper we can still see the previous scratches more water sandpaper 1000 we'll grind it out a little more sandpaper 1500 sandpaper 2000 sandpaper 2500 abrasive paste polishing paste light scratches are still visible therefore it is better to polish mechanically unsanded resin for comparison

Channel: ResinWoodArt - jedrek29t

Views: 1,127,415

Keywords: sand, grid, polishing, resin art, epoxy resin art, how to, sandpaper, tutorial, how to make your resin looks like clear glass, clear resin, clear glass, resinhow to polish, shiny resin, resin polish, resin polishing, resin polishing tutorial, resin sanding, resin sanding tutorial, how to sand resin, how to sand resin smooth, how to sand resin work, how to sand resin coaster, how to sand resin crafts, polishing resin, polishing epoxy, polish like a pro, jedrek, jedrek 29t, diy

Id: mgKKbA_J2go

Length: 15min 51sec (951 seconds)

Published: Sat Dec 18 2021