How to make Sliding Bait rig. D.i.Y.

you know what afternoon today we will try to do a homemade sliding bed rig so we can cast with more distance and we can catch just an increased chance of catching bigger fish so all you need is a wire approximately 14 inches then you have to bend it in the middle at exactly 5 inches so after i bend it in the middle at 5 inches so i made a small bend like a cobra bend in the tip so you have to make sure that the shorter one is on your right and the longer one is on the left because you will be loading using your right hand if you will use using your left hand then the shorter one should be on the other side you just have to reverse the procedure so now that the bend is there you can use a bison grip or a plier just to apply pressure on the shorter one so you can see this is the shorter one so i start rotating yes one two we only do two because we need the link so after you finish on the shorter one you will then go on the longer one so same procedure clip the near the side so only two rounds one and two so it will appear like this so you can just press it this is a more marriageable wire because this is just as a sample so it's easier for me to explain so now it will look like this so what's the next procedure so now you have to make the bend so because we will be loading with the right hand we have to bend this one going to the shorter one like this and then this one we will just twist it twist it around the other one so just clamp here and i twist again this is just a sample wire that's why it's malleable it's softer and easier to maneuver it should appear like this okay you should roll it as tight as possible and then this one we have to make a circle here so we can hook or swivel imagine this is my sweeper so i hook it there and i use the pointed plier to make a circle then when i make a circle i just twist and this should be inside okay so now it's all we're almost finished now we just have to bend this one so now so this is the sliding bait rig so that's where we will next on next the next video we will show you how you can load it

Channel: Eduardo Racoma

Views: 1,475

Rating: 5 out of 5

Keywords:

Id: OeqJm84FL8A

Length: 5min 55sec (355 seconds)

Published: Tue Mar 02 2021