How To Make Roblox Accessories (Get Robux!)

hey guys and welcome back to another video on the road builder youtube channel today we're going to be making my new ugc and i'm going to make some spin-off of a candle yesterday i think it was yesterday anyways i made a video where i made a enchantment kind of temple thing and i put candles on it and i really liked how those candles turned out now i want to make a candle for a ugc item but there has to be a twist because if there's not well who's gonna buy just a candle that sits where on your shoulder floating what's it gonna be so i'm thinking let me draw it out for you guys i'm thinking something like this so here's your roblox head okay that yikes yikes hold on hold on let me just like i'm not an artist but i can definitely do a little bit better than that okay all right look at that there's your roblox head now i'm thinking the candle uh let's go can we pick like a we'll go yellow because that seems to kind of make sense the candle will kind of be like this so dripping down your face like the candle wax kind of dripping down your face like so and this will all be colored in of course like a candle would be and then the top will be indented a little bit which is kind of hard to draw because i'm not an artist and then there will be a wick right here maybe have a little flame on the wick i'm not sure yet it depends if we run out of like you know polly's or tries to work with i guess but there's the idea i'm gonna make a dripping candle so it looks like there's a like your head is a candle and then it's it's melting i guess that's kind of the idea anyways i'm gonna import a little model or a dummy into blender so we can make sure our size is correct file import obj and the dummy right here so first things first let's just set our origins set to geometry and i'm just going to move that up a little bit should be pretty close to where it needs to be anyways here's our dummy and now we just have to worry about modeling the candles so i think what i'm going to do is spawn it with a cylinder and make this up like we can always decimate it so i think i want to go like 40 sides okay like like quite a bit but it's going to give us more detail maybe not that many 35 35 should be a-okay so i'm gonna do that also i think i want to just bring in a new one i don't know why it's not spawning in the middle guys who knows now i'm never gonna be able to line it up perfectly i know there's a way to set it back to the middle but i don't know exactly how to do it so here's how i'm gonna do it check it out just line it up i got this good enough for me let's move it to the head perfect as you can see this is probably gonna be the best ugc ever what if i just released this like like as a meme of course but some meme items sell really really well so what if i just said like head of cylinder i don't know watch somebody's gonna do it i'm guaranteeing it somebody will do it and it'll get a ton of sales and i'll be like dang it i should have done it now i'm going to press ctrl r and use the mouse wheel to scroll up a few times i want quite a bit of them probably something like this should work for me now i'm going to go to our face select mode i can't just click three on my keyboard like i used to be able to because this is now my numpad like my top arrow keys is now the number pad so that's kind of tough anyways we're gonna drag this in we're gonna press e and extrude this down scale that in a little bit and then we're to press i to inset this and this will be kind of like the wick so let's just do that scale it down rotate e s rotate something like that and that might be a little too big but um you win someone you lose honestly no i'm gonna i'm gonna make that a little smaller i'm not a big fan of it in fact i might just make the wick afterwards like after i make the candle that might even be a better idea all right so here's what i'm gonna do i'm gonna press c to go into c select mode or whatever circle select mode and just kind of grab a bunch of these and make sure i get all of them perfect and i'm going to grab the whole top as well just like that and now i'm going to go back into circle select mode and kind of pick like paths sort of so something like this and just just paths that uh the the melting will happen with i guess i don't i don't really know how to explain what i'm talking about but just doing this for uh for quite a bit and all around it and of course i actually unselected in here so let me just do one of those grab all of this all right there we go so i'm gonna go ahead and do those paths real quick and i'll show you guys when i have all of that selected all right guys so i have a very random selection and i've also run into the problem that uh i'm not making a candle i'm just making the candle drips and that was sort of the goal but i'm gonna still do this alt e and extrude along normals and bring that out a bit and i may try to do shift d and just drag these over now that's going to give me all the faces and all the drops and then i could just delete this guy all right i don't know if that's the best idea but i'm going to do that now i'm going to go ahead and put a solidify modifier on this like so just to make it a bit more uh you know nice and then thickness needs to be up quite a bit there we go and i'm just gonna apply now i'm gonna add a subdivision surface modifier like this and that's gonna make it look more like drips as you can see and i just need to center this over the dummy alright guys so i got it lined up to the best of my abilities and it's looking pretty good so far now i did leave a little gap when i was modeling it right well now they're all kind of looking the same but i could either use this one right here or this one kind of right here i think i'll use this one is that the biggest gap we have yeah oh or this all right so i'm gonna use this and basically i'm gonna rotate this so it's like sort of like the face will have a spot to see but also not entirely and then up next i want to grab this and i want to move the middle of this up so just like this uh but of course like all of this so let me go ahead and grab all of these faces here like so and move them up it does need to be down just a little bit but i don't want it to dip into the head so something like that works pretty well maybe even a little more since it is still a candle that should work for me and i'm gonna shade smooth because it'll just look a ton better just like that and also we we have to kind of figure this out because it doesn't curve well with the head so i need to figure out how to curve that a little better i'll probably just grab these lines right around here and move them down a little bit and then do the same here i'm just holding shift and alt to grab all of these since it did decide to separate them up a little bit usually just alt would work but um yeah it's not so i gotta hold shift and alt and make sure i click all of them there we go i can move that down sure and i'm going to scale this in a little bit as well as up here all right so now as you can see it's not really coming off of the face too much it looks pretty good i do want to leave a little bit of space just for like other accessories maybe like glasses or something but i think that looks pretty good so there's the kind of drip that i wanted to have i'm gonna go ahead and apply my subdivision surface modifier now we have this up next i'm gonna go ahead and add a wick and then maybe a flame but probably not my my thing is people will probably want to cover this with a hat and if there's a flame on it it'd be a little harder to cover so we're just going to add a wick real quick i could do that just by adding in a cylinder bringing that straight up scaling it down and scaling down some more i do want the wick to be rather small i think people are going to want to cover it up but i need the wick to kind of like portray the idea that i'm going for so i do want uh i do want to kind of have it let me go ahead and alt click this line and scale that in just a little bit more because wicks are like very small you just gotta light them on fire gonna shade smooth that's i will do ctrl j to group these together and there we go kind of a candle top now i have to figure out it has 7 200 tries i have to go recheck the requirements real quick and i'll be right back all right so on the emails we get from roblox showing us the requirements it does say i'm not allowed to share the specific requirements um so yeah i can't share the exact details but i do know that this is too high poly for what they need so we're gonna decimate it and hope for the best i'm gonna bring this down to like one as long as it doesn't lose too too much of its shape it's definitely losing too much of its shape so i'm gonna keep it at two or point two let's just try to put it like point three i wanna keep a lot of the shape but i need to get rid of a lot of the polys so boom there we go we're now at four thousand tries and four thousand verts so tries were almost okay verts we are not all right so i gotta do a little bit more just to get it to meet the requirements and everything like that but for now i can go ahead and texture it so uv editing open up our color palette perfect for me and i'm just going to press l on this grab the whole thing and go into one view u over here project from view and now we have this and i can just scale this up or down and we can kind of get a nice gradient on it so candles are sort of like i'm going with like over here i think would be our best bet i'm gonna drag this down a little bit and add our texture to it and then just go into material preview over here and look at that guys we have a little candle we're gonna need to texture this little top guy as well so as0 and we're just gonna make that like real dark kind of like black actual something like this i'm thinking we need to do a little something else here like darker colors i guess a candle can be like really any color but i'm trying to kind of stay true let's scale it on the z axis or y i guess and hopefully that will give it okay that's better that's a lot better okay so here's here's what it is here's what it is guys the candle coming to a catalog near you okay i don't know what the cheapest price for a hat i can set it to is but whatever that is is what i'll set it to so hopefully you guys did enjoy this video if you did and you want to see more content like this please make sure to like comment and subscribe have a great day later

Channel: RoBuilder

Views: 12,377

Rating: 4.9502764 out of 5

Keywords: Austin, Enders

Id: 1xRpIQhrQFQ

Length: 9min 59sec (599 seconds)

Published: Sun Sep 12 2021