Hello, nice to meet you. Today, we are going to learn about the core function of Stability Fusion. It's the control net. Without the control net, Stability Fusion wouldn't be this popular. Compared to DALY or MIDZONE, which usually create images by inputting only the prompt, Stability Fusion is not so overwhelming that it can be created only with the prompt. But the moment you apply this control net, the dimension changes completely. If you apply this control net, you can create animations, composite movements, interior design, and all of these things through the control net. It's an enormous expansion function, and new things are being updated. So today, I'm going to explain how to install this control net. I'll leave all the links I need for installing the control net in the comments. Please check them out. I'll check the link through the cafe because this link is posted on my cafe. The basic way to install the expansion function is the same as installing other expansion functions. First, I'll bring the link from the cafe. Copy the link here as it is, and come back to Stability Fusion and come to Extensions as always. Click Extensions and click the Install from URL tab. Click. You can click and paste the URL inputting place. Next, click Install. After a short time of installation, the phrase, If the installation is complete, the installation is complete. Restart. Then, to check if it's installed properly, go to the Installed tab. Click. Now, what you need to check here is that you need to check if there is a word called Control Net, not the top. In the extension, I see the fourth one here, and it contains a control net. It's installed well. Check if it's in the checkbox daener. If there is no problem, click Restart UI. Click. The UI is running again. To check if the control net is applied well, you can go down. I'll go down. If you look down, there will be another tab that has never been below. If you look here, the control net version version will probably vary depending on the time of installation. I'm now in 1.1.422 version. So if you click this and zoom in, you can see that the control net is installed in this way. If you come this far, the first step of installing the control net is over. Now, then, this question may arise. What are you talking about? Didn't you just install the control net? You might think this way, but that's right. The installation of the extension itself is over, but to properly use this control net, we need to download these models separately. So we're going to download that model now. I'll leave the download link in the comments again. I have a link to the cafe, so I'll go to the cafe and move to the link. It's good to follow the installation while watching the video, but if you just want to install it quickly while watching it in writing form, if you sign up for the cafe, anyone can see it. I've set it up now, so if you look for the control net installation, you can check the text like this. Now, I've written it in order here, so you can watch this and install it. So I'm going to download the second step, the model. I'll connect to Hugging Face and download these model files. I'll click on the link on number 3. Click. Now, I clicked on it and came in, and there are a lot more files than before. But don't worry, just download the area I tell you to download. Now, if you look here, you can exclude the 136MB one. You can ignore the files with the name Lora in it, which are 136MB. And all the files we're going to get are 723MB. You can download all of these files. Of course, if you know a little bit about control net, you can say that you only need to download what you need. But since it's our first time, I'll download all the files related to control net. The way to download is to click the download button next to each file. Click this button and combine it with one folder. It's important to download it first. It could be confusing later, so create a folder. It's better to move from that folder later. So all the 723MB files are downloaded. I'll download it. I've downloaded it. I've opened two folders. I've opened two folders to help you understand. One is on the right of the control net files we just downloaded. I'll explain where we should put this model on the left. First of all, you can copy the files on the right. If you don't have enough capacity, you can copy it. I'll show you how to do it. I've installed it on C drive. Come to C drive and go to the stable diffusion web ui folder. Click. Then there's a folder called extensions. You can come in this way. Click. And there's a control net code folder we installed. I'm going to copy this control net folder. I'll copy it. I'll copy it. I'll copy it. I'll copy it. I'll copy it. I'll copy it. I'll copy it. I'll copy it. I'll copy it. I'll copy it. Come to this control net folder. Click. Now, this is the last folder. Find the models folder and go to the models folder. Click. Now, the models are probably empty. You can move the files you just cut here. I'll move it to control v. Controlv. Now you're ready to use control net. It's all over. Then we'll have to check if these models are applied. I'll go back to stable diffusion to check. I'm back on the stable diffusion screen. Now, let's go back down and check if the control net is applied. If you download it, open the control net tab. If you go down again, you'll see the control type, the preprocessor, and the model. You have to check if there are any models that you just put in. So if you open the model, I'll open it with my eyes. If you open it, there's nothing. It's not being re-fixed right now, so it's not there. So if you didn't put in the model, it's going to float like this. But we just put the model in the folder, so if we re-fix it, these models will float. I'll check. I'll press the re-fix button and check. Now, I've pressed and checked, and you can see that the models I just put in are coming out like this. So how do you use the control net? I'm going to explain one by one next time. There are models that fit the control type. For example, there are things like Kenny, Depth, Normal Map, Open Pose. You choose a model that fits each control type and work on it. Today, I'm going to introduce you to the installation and introduce you to the usage in the next time or another time. So, first of all, you need to check if the control net expansion function is installed well, and if the models are applied well. If you've done well, you've successfully installed the control net. So we've been working on the control net installation together. It's not as difficult as you think, and if you do it one by one, you'll be able to follow it quickly. I don't think you need to think too hard. That's it for today's lecture. I'll be back with more useful content next time. Thank you.