How to install Juniper vMX router in GNS3 - 2018 - Full HD

hi everyone in this video I wanted to show you how to import router image the dirt on a mix router in gns3 so that's that first of all start up gns3 it's okay we do not need another project or k on the routers section click new appliance template ok and select add chiamo viewer machine ok it's going to look like this and let's name this I have rename copy ok juniper or Jonas OS and control V without this a mix okay next we are gonna use one gig of ram okay we're gonna leave it 64-bit next turn it is okay for the console access new image let's browse desktop and generous router and this is the the Q C or w2 image open would you like to copy to the default image directory yes and finish now we gonna do something more okay this is the appliance we have imported let's go to edit and here we are gonna do this the mix - and - - okay let's put this to the router section and let's choose another symbol okay let's choose this one router that's all anyway one gig of ram routers on the network let's put 11 interfaces I'm gonna show you why 11 okay it's okay for this no it select okay apply it's here oh okay drag it to the workspace okay and let's start let's start the Syrah it's gonna take some while it's completed what are the scene here the e/m 10 9 8 7 and so on and the last one was the FX 0 FX 0 r is the management interface and the other one are the normal I think gigabit interfaces okay but here on the interfaces it shows Ethernet but we are going to change this one let's go back to the Sierra okay the problem is I got this image somewhere on the internet I don't know do not remember exactly where but the problem is I do not know the credential it's not empty image it has some configuration if I type root and like Juniper with capital J no then root and love one two three no but what I'm going to do is a password recovery okay let's just we are going to leave the see right here the console and we are going to reload the router okay and you have to know press the spacebar a few times okay and type both space - s and enter let's make this window bigger okay it's going to reboot like the first time okay enter full platinum of shell or recovery for root password recovery we do not know the password so we need to type recovery okay okay this is not good one moment let's think I think what I know what is the problem okay let's edit the template Network but the age okay let's do this again start CEO die you're going to wait now trace a few times the spacebar no okay both space - s the same we enter full Putnam or shell or off shell or recovery we are going to type recovery because we need the password and enter performing in its elevation of management services so this is the router image okay so we are here at the command line interface the usual thing the usual stuff we are going to do is we're going to edit edit system and set root plaintext password enter juniper with capital J again juniper with capital J the problem is if you type show five compared it was an encrypted password this would be deleted and this will be added what we have typed but I'm not going to do this because I wanna actually with uncommitted changes yes I'm going to do this request system 0 rights okay this will delete everything it's gonna show us an error that IPSec key management subsystem is not running we do not care now again with reboot it's gonna take a while but it will work okay now it show us the prom with amnesiac this means it has no configuration we type route this is the only user and no password we are at the root shell prompt and type CLI and you are in show configuration this is all this is everything display said what the problem is if I just okay let's show you one more thing okay so interface starts if you see there are a lot of interfaces what I wanted to point out this one the Gigabit Ethernet interfaces because here we have eaten just Ethernet interface but actually it's trigger bit interface and that's up arrow key and match G we have nine Ethernet interfaces and we because also we have another tool one of them is the ethics p0 and the other one I think is the management or the I don't know so we have here 11 actually because it's 0 also and in the sea alive we have 9 so 11 minus 1 is 2 1 is for the management interface this one and another one is I think for the link between the routing engine and packet forwarding engine what we are going to do we need to show was not Ethernet so Gigabit Ethernet the other problem is that if he we just delete this one you are going to import another one and we have to do the same I mean again the password recovery but I don't like this so I'm gonna do another things one let's configure the template first of all on the network let's first first port name is the F XP 0 you also can configure this the second the remember is the link between the PFD and air in okay and we are going to change this to g e- 0 / 0 / oh ok ok what another thing at the end to Advanced Settings just enable I mean check this enable scpi shuttle no sorry just uncheck the use as link based virtual machine ok just uncheck this ok this makes if for every changes will make here then every new template will have the same changes so you're gonna do another password recovery and start and start CLI please now the spacebar a few times and type boot space - s ok okay so type recovery for root password recovery also now we have here on the interfaces look like this so the first one is the fix p0 the problem is the second one it's not the Jacob it 0 / 0 / 0 is the link between the routing engine and the packet forwarding engine actually the third one is the Gigabit Ethernet 0 / 0 / 0 okay so again request system 0 rise enter yes system will be rebooted and may not boot without configuration this is what we want here is all data including configuration log files yes perfect yep it's gonna take a while almost finished yes perfect if it shows amnesiac this means there is no configuration on the device we can login as root we are at the Linux Elijah and CRI show configuration display set there is nothing here ok great now we are going to do this you are going to stop the machine right click and delete yes on the image here on the appliance right click configure a template and the last step Advanced Settings and we are going to check the use as links link at base VM this means every new drag and drop of the router appliance will be without configuration and then we gonna press ok ok let's make just a simple test between these two routers we're gonna start board routers ok let's do this so the first one is the management interest we are going not going to use this the gigabit 0 / 0 / 1 is actually the gigabit 0 / 0 / 0 okay I'm gonna show you what I mean okay let's get it a console one enter this is the first router and the second one the login is the route okay CLI the same on VM in Stowe wrote we are at linkshell CLI okay now going to edit and first of all you have to set the root password so edit system set root plaintext password and enter juniper with a calculate capital J again o pipe comes back this is the only changes okay edit edit system set the root plaintext password Juniper with capital J okay since we are here let's put a hostname I said was named the mix to show pipe entire so we said the hostname and root password commit set hostname the mx1 commit so we are going to go now to edit interfaces no internet top edit interfaces gigabit 0 / 0 / 0 okay now set unit 0 family I need a dress and add resist this one that one 10.0 that 0 that 1/30 okay so point compare okay commit again top edit interfaces gigabit 0 / 0 / 0 set unit 0 family I need address 10 that 0.02 / so pipe compared top okay come well so interface sisters match G okay we have the interface from 0 to 9 0 to 9 so what 0 1 2 3 4 5 6 7 8 we're gonna need another interface okay but we have again alone so interfaces that's much G so we have the interfaces on gigabit 0 / 0 / 0 and here exactly the same let's run a pink run being rapid to the other one 5 packets transmitted 5 received and 0 packet loss okay this mean is working so hard yes you see the other one what we have to make another change its we have to put another interface so network actually thought okay this is it so this was the router for the Juniper RS on G anything thank you for watching and see

Channel: m c

Views: 13,258

Keywords: 14.R1.10, vMX, Junos OS, Junos, Juniper vMX, Juniper, GNS3, Full HD, 2018, How to install Juniper vMX, How to install Juniper vMX router in GNS3 - 2018 - Full HD, Add Juniper Junos OS vMX 14.R1.10 in GNS3, Add Juniper Junos OS vMX, Juniper vMX router, Junos OS vMX, vMX 14.R1.10

Id: 8HVG-mrzk2I

Length: 23min 5sec (1385 seconds)

Published: Sun Nov 11 2018