How to Dual Boot macOS Catalina and Windows 10 on a PC (Complete Hackintosh Guide)

please support my channel by clicking on this red subscribe button right below the video once you get subscribed to my channel you click on this Bell I can write next to it in order to get notifications about my latest videos and last but not least if you like this video please click on this like button in order to show me all of the guys about here come Adam tech guys and it's good to be back on YouTube after a long time it's good to face the camera and talk to you guys I really appreciate all of you guys are subscribed to my channel you guys are great so yeah let's get back to the video interested I wanna show you guys how to do all boo to Mac OS and Windows operating system on your computer so before I start this I would definitely like to give you guys a disclaimer that this video is only for educational purpose for learning purpose please do not use this video for any of the activity which is not legal because my channel as well as my videos do not support any of the illegal activities and also a few things to keep in mind before we start this video you guys have to make sure you guys have already backed up all of the one contents from your hard drive because this process will erase everything from your hard drive on which we are doing this also please disconnect all the extra hard drives which you guys have connected to your computer because there might be instance just to be on the safer side because at times you guys will end up deleting feed off your important contents from from other hard drive about the system specifications I am using a little bit old configuration keeping the compatibility in mind this video is going to be a little bit lengthy compared to my previous videos because this is going to be a detailed video but I will definitely try my best to keep things simple easy to understand for you guys as well as I'll be dividing this video into a few parts the first part is going to be making a bootable flash drive for both of our operating system the second part is going to be installing the Mac OS first on to our computer making the partition two different partitions into our hard drive so that we can install Windows 10 later the third part is going to do installing the clover bootloader which will then help us to you know boot from our windows 10 operating system and finally we'll check in the things dual boot so that's how do we just going to be that's out the agenda for today's video so yeah guys enough of you talking already without wasting any further ado let's get start with a video [Music] you this is the first part of the process or we'll be making a bootable flash drive for both of our operating system so first off you're gonna have to go to Google and search for the setup file for trans Mac this software will help us to write our Mac operating system on our flash drive the second thing which you have to download is the software called Rufus please go to Google and search for Rufus by the way I'm gonna give you guys a link for both of these software in the description you guys can directly go ahead and click on that link and download once you guys are done downloading to install these software on your computer right click on the trans Mac and click on run as an administrator once you click on run it will open this software here you see this you know last drive which is my USB flash drive so these all are the hard disk connected to my computer and this is the one on which we will be writing our Mac operating system this is the USB flash drive as you guys can read right here please be careful do not delete any of these because these all are your hard drives right click on the last one which says USB and click on format this for Mac once you click on that you guys will get this pop-up which says warning click on yes now this box is asking you to name your flash drive now this thing is formatting a flash drive into Mac OS format and it will take the time since my flash drive is of 16 gigabytes it will take some time to delete the contents also I already have Mac OS in this flash drive so it's delivering it so it might give you a pop-up which will ask you to format this we just close this and close this and this says that the format process is completed I'm gonna click on OK now you guys have to right click on this again and click on restore disk image you guys have to click on yes now in this page you'll have to click on these three dots the small box which has got three dots is asking you to browse for your Mac OS image file I'm gonna click on Catalina right here as you guys can see the image itself is for more than 9 gigs I mean it's gonna be somewhere around 8 point 64 gigs if I'm not around right here 8 point 64 gigs yeah so it's a big image file it will take time so you're gonna have to click on this and click on open once you click on open this image file will be selected right here in this box as you guys can see right here I'm gonna click on OK so once I click on OK it will start writing the Mac OS files on to my flash drive now this process will take time you have to wait till the time it completes the entire process and then once the process completes it will give you a popup on the screen which will let you guys know that the operation has been completed successfully so guys it completed the process it shows restore complete I'm gonna click on OK now now guys once we are done making bootable flash drive for our Mac OS catallena now we'll have to come to the partition which we which is created after making the bootable flash drive here this is the partition which says klore so this is the efi partition of our flash drive which we will be using after we are done installing Mac OS to our computer so we'll just open this and there will be files which I will link in the description the link will be for these two files and you'll have to download multibeast mojave edition from 20s Mac x86 comm now you'll have to copy this file to your flash drives efi partition which is clover and you'll have to wait till the time the file gets transferred so you guys have to remove the flash drive which is connected to your computer right now because this is for Mac OS and you'll have to connect the other flash drive which you guys want to make a bootable for Windows you'll have to then come to Rufus and right-click on it and click on run as an administrator it will ask you to select your flash drive right here in the first drop-down make sure you select your flash drive now after selecting the flash drive you'll have to then click on the second one which says the partition scheme do make sure you go for the last one which says GPT partition scheme UEFI I'll select this one now the third is going to be selecting the filesystem I'll select NTFS so I'll click on this one and it's gonna ask me to browse for our windows image file windows 10 image file to be more precise I'll select Windows 10 professional here and I will click on open and that will be selected now you can give the new volume label name so you can give the name to your flash drive possi click on start it will start writing the image file on your USB flash drive so that's how you make Windows bootable flash drive for your Windows operating system so guys we are done with our part 1 of the video we have made bootable flash drive for our Mac OS as well as for our Windows operating system now we're gonna restart the computer we will go to our BIOS we will make a settings in our virus so that we can install our Mac operating system so I'll restarted my computer and I'm tapping the delete button to go inside my BIOS screen so I'll come to BIOS feature first and I'll come to Windows 8 features and I will select other OS in boot mode selection I will select UEFI only and this land PXE boot I will just leave it as it is storage boot option control I will select UEFI first other PCIe device run priority I will go for UEFI opere on so guys these all aren't the options which may stay similar in most of the motherboard since I'm using gigabyte motherboard the settings might be similar in the other gigabyte motherboard but they can vary according to different you know brands like Asus might have some different settings all together but the names may stay similar so please do make sure you do the settings right in order to make your computer boot properly into our Mac installer so I'm gonna press the f10 button to save and exit these settings and I'll then keep on tapping the button after well which will take me to my boot device menu this is the boot device selection option I will go for UEFI OS which will go to my computer from the flash right so this is a claw bootloader now I will select the settings first so this is the settings which says option right and you guys will see this mark which will indicate the options in which you are in right now so I'll come to options first and press enter I'm going to press the enter again and I'll delete everything which is there here - B - V and graphics enabler equals yes if you guys can see right there I will also include this in the description I'm gonna press ENTER and I'll go to graphics injector I'm gonna press the spacebar on inject ATI since I am using the ATI graphics card the AMD graphics card I'll come down at the bottom and I'll press ENTER on return and I'll again go to return and press ENTER now I will you know go to the first option and I'll press spacebar which says boot Mac install from nourish katalina by the way we are using the nourish Edition for this OS since the nourish editions has got lots of text pre-installed so I you know I preferred this one so I'm going to press the spacebar on this option and I will go to the first option which says boot Mac OS with selected option dice if you are using the Nvidia graphics card please make sure you come on this which says use Nvidia web drivers and press the spacebar to check mark the box since I'm not using the Nvidia graphics card I will leave this blank and I'll go to boot Mac OS with selected option and I'm gonna press ENTER and it will start booting into the Mac installer this thing will take some time so I'm going to pasta with you and I'll be right back so we have the Apple logo in middle of their screen and it's loading the setup files from the flash drive now anytime from now it will bring up the Installer window so this is the setup window I will have to press in the center to bring up this toolbar which has different menus on top I'll go to utilities first let me just make my screen darker so that you guys can see the options and the menus now I'll go to Disk Utility first since we have to make partition in our hard drive to install Mac as well as Windows 10 so you guys have to click on this and you'll have to make sure you click on show all devices so that your hard drive becomes visible so this is my hard drive and these are the you know partitions in my hard drive so I'll highlight the main hard drive and I'll click on partition first and I'm gonna click on partition now this is the pie diagram here which shows my entire hard drive I'm gonna have to just click on this plus sign and it will divide my hard drive into two different partitions so the ratio will be 50/50 now I'll have to come here which says untitled and I'll have to give it name so this is going to be my Windows partition so it's asking me to name the partition I'll give it Windows and format will be ms-dos fat and the capacity and size will be grayed out so you can't change it welcome to this partition and I'll change the format to extended journaled and I'll name it Mac Drive are done making two partitions for our mac and windows i want to click on apply and i'm gonna click on partition and it will start partitioning the hard drive for our operating systems so it will take some time if you guys want to see the background process you guys can click here and it shows the entire process which is going on in the background now as you guys can see it just took W for Windows it's not gonna take the entire name for Windows I really don't know why but when you are partitioning the hard drive and if you want to give named Windows to a specific partition it will not take the name Windows it will just give you a letter W I will close this click on continue I will again click on continue I'll click on agree and this is going to give me my Mac right which I just made I'm going to click on this highlight this I'll click on continue now guys the process has been started it's installing the Mac operating system so I'm gonna pause the video right here and I will be right back once this thing completes and the computer restarts so guys my computer's restart itself I'm gonna keep on tapping the f12 button to come to the boot selection boot device selection menu and I'm going to come to the options call Sony storage media so first we'll go to settings options and I'll press Enter I'll come to the graphics injector I'll press Enter I'll make sure I have checkmark the box which says inject ATI since I will be using the ATI graphics card I'll go and I'll go return I'll go return again and I'll come on the partition which I just made Mac Drive and I'll press Enter now it's booting my computer from the Mac Drive and this will take some time this is the first boot and it will take me to the Installer window that's not going to be installer that will be an Apple icon in the center of the at the center of the swing and it will continue the installation process so guys I'm gonna pause the video right here and where we start the video once the process gets completed so as I mentioned earlier this is the Apple logo and the Installer has again restarted itself this progress bar will complete 200% and it will again restart from computer so I'm going to pause the video right here and I will restart the video once the Installer completes itself now it restarted my computer again and I will have to make sure I'll again press the f12 button to you know boot my computer to the boot selection option I'm tapping the f12 button and I'll go to the root device selection menu and I'll again go for Sony storage media UEFI and I'll press ENTER and that will take me to the claw bootloader I will again go to settings I will press Enter I'll go to graphics injector I'll make sure I have checkmark the box which says inject ATI so that this is not necessary but I just want it to be on a safer side I'll go return I'll go return again and I'll come to the Mac Drive and I'll press ENTER and my computer will again boot from the Mac right so guys this is again going to you know start the installation process so again I will see the Apple logo in the center of the screen and the Installer will again start installing the operating system on my computer so I'm going to pause the video right here and I will wait till the time the Installer stars so guys as you can see again the Installer started the further process of installation as you guys can see it shows about 16 minutes remaining right there but it's not gonna take 16 minutes guys trust me it will take longer according to your computer speed so I'm gonna pause the video right here and I'll restart the video once this thing completes hundred percent and my computer will restart itself so I'll have to tap the f2 button to go to the boot selection menu and now I'm gonna again have to come to Sony storage media and press Enter and I will again have to go to options inject a TI I'll go to return I'll again go to return so now this time it shows boot firewalled freebooter from pre boot so I'm gonna press enter on this and it will again start the next installation process this is the last stage of the installation wherein it will show you one off one 100% completed but it will still take time we have the Apple I can again in the center of the screen and the progress bar is still going on so it will take some time again I'm gonna pause the video this is going to be the last restart which we our computer will take so guys my computer just restarted I'm going to have f12 button to again come to the boot device menu and I'll again go for Sony storage media and press Enter so first let's go to options and go to graphics injector again you know inject a DI and return return thing which saves boot firewalled freebooter from pre boot and I'll press enter and it will again start the installation process so guys as you can see this time it's a different page altogether it's asking us to select the country I'm going to select United States so you and one two three four five six and press Enter United States I'll select United States and I'll go to continue now I will again go to continue my computer does not connect to the internet I'm going to click I'm going to select this and I'll go continue since we are going to install the text files later I'll click continue I'll click continue and I'll click don't transfer any information since I don't have any information to transfer to this map I'll click continue and user licensing agreement I'm going to click agree I'll click the query again now it's asking me to name my Mac so I will give it Adams tech ID I will go next now this is asking me to enter the password this is not going to take one digit password so you're gonna have to make sure you give at least a minimum of six letter or six digits as a password so I'll set up the password for my computer all right let's go for continue again and this will take some time so I'm going to click on continue I will keep this box unchecked I don't want this and I'll go continue and I will go to setup later now we have three themes so I will click on dark and I will click continue and it's setting up my Mac now he's asking me to set up the keyboard I'm gonna click on continue now we'll have to click on Zed and we'll have to click on the floor slash and it will take the United States keyboard and I'll click done so guys we are done installing our Mac always say let's go for settings I'll do few settings because I want my Mac to look nice I'll go to dock I will reduce the size of the dock and I'll click on magnification and I will make sure the magnification is on perfect it's working let's check if my graphics driver works yes it's working as you can see the translucent effect as you can as you guys can see the effect that means my graphics drivers are working I'm going to go back and I will go to Mouse I'll just make sure this well the scroller is in place I'll go back I'll make the icons smaller let me just go for perfect and I will reduce the size of the text perfect so it looks good I think the Audio Driver is pre-installed so as you can see we've got built-in options right here that means we are we have we already have the audio driver installed in the computer now I'm wondering if I have the network driver we have this port which is not configured that means the network driver is not working so we are done installing Mac OS Catalina to our computer or something to go to preferences in finder and I will check mark this box which will make the drives in my Mac visible and now I'm gonna go to kloewer and I will open the efi folder and I will you know drag and drop the new folder which I placed when I was made the bootable flash drive for Mac OS Catalina now I'm going to drag and drop the files which we placed inside the efi folder so I'm gonna first open multibeast and I will extract multibeast in the Mac and I will run multibeast now I am doing this just to install the unit bootloader so I'm going to go for UEFI boot mode because my motherboard supports the UEFI boot mode and I'm gonna go for the drivers now the Audio Driver is by default installed I'm gonna go to miscellaneous and I'll check if things are properly selected here Intel Ethernet and I'll go for USB and I will checkmark the box which says you as being inject all now things are free you know checked here like for example bootloader was pre checked now I'm gonna go to build and I will install I will click on install it will ask me to agree the terms and condition I'm gonna click on agree and that will install the text files on my computer guys I'm not installing these text files because I have already installed the text files and drivers are properly installed on my Mac so I am NOT doing the attack right now but this is just for your understanding that you guys have to do like this in order to install a bootloader which will then help us to boot between Mac and Windows operating system so guys that's it we are done with the installation of text files the drivers as well as the bootloader for our Mac operating system I am going to move to the other part of the video installing the Windows operating system on our machine and you know trying to dual boot between Mac OS and windows offering systems so guys that's it for this part I'm going to stop this video right here and I will be restarting the video that is the installation for Windows 10 operating system so guys I've restarted the computer and I'm tapping the f12 button to come to the boot device selection screen which will pop up in the meanwhile let me just focus the camera I will you know reduce the brightness so that you guys can see the menus so I'm going to enter into my UEFI Sony storage media because I have the other one by the way guys I have connected the the flash drive which has the bootable Windows 10 so it's gonna bring the installation wizard I am going to click on next I'm gonna click on install now and I'll wait for the other window to pop up now let me just adjust the camera guys my camera is moving away from the monitor now I'm gonna click on I accept for end-user License an agreement I'm gonna click on next again I'll click on custom install and I will select this the partition so you'll have to check out the free space as you guys can see I have the partition 3d blue I'm gonna click on format and I'll click on OK click on next in order to proceed further with the installation now it's gonna take a while so I'm gonna pause the video right here and I will be right back once the installation completes 100% so guys we are almost done with the first part of the installation it's just installing the updates as you guys can see things are getting check marked there now in in a very shop while my computer will restart itself as you guys can see it's restarting itself we're gonna just wait till the time it restarts and again I'm gonna keep on tapping the f12 button to come to the boot device selection menu I'm gonna enter into UEFI OS and I will just wait till the time it boots from the UEFI OS now we'll boot up into klore bootloader I must select boot microsoft efi and press enter that is my computer restart itself again I'm going to tap on the fjl button again to come to the boot selection menu and I will select the UEFI OS again and press Enter it's booting from my UEFI OS again it will bring the claw bootloader if I'm not wrong and that's gonna ask us to select the Microsoft efi partition again I'm gonna press Enter on Microsoft EFI boot from efi partition let me just decrease the brightness I'm gonna press Enter and again it will start you're gonna have to you know bear with the installation bit because it's gonna take a while so now it has popped up a blue screen which is showing us just a moment that means we are almost done so guys here we are we've got the country selection page I'm gonna select the United States and I will click on yes so that's your view our we have the edge window open so I'm gonna close the edge window and this is our Windows 10 desktop so I am going to you know refresh the page for several times let me just check if things are working fine let me just check the partitions we've got C Drive 465 gigs of C drives C Drive and this is my UEFI NTFS partition which will help us to boot so so guys I'm gonna restart my computer and check if I am able to develop boot from my Mac so my computer restarted I'm going to go to BIOS settings and I will make few changes in order to you know dual boot my computer into Mac and Windows 10 I'll go to boot option 1 and I will select UEFI OS press enter and I'm going to tap in I'm going to tap in the f10 and press ENTER to save and exit the settings my computer will restart itself I'm not going to have any button now and here we are we have the clawed bootloader I'm going to boot into Mac OS to check if my computer is booting into Mac OS so from boot from Mac disk so as you guys can see I am into my Mac operating system I'm going to enter the password and it will take me to the you know desktop screen of my Mac OS Catalina now here I want to make few changes in order to you know remove the variables mode I'm gonna go to google and type in Clover configurator second option from Mac update and I will download the klore configure the tool now the tool has been downloaded I am going to open this tool just for my system to recognize it I'm going to open this tool to make my efi partition visible so that we can go inside the efi partition and we can edit our config that Pelias to remove the variables mode from our Mac Drive I'll go to Monte Fi and this is my AFI partition I'm gonna click on mount partition I will ask me for the system's password I'll enter the system's password and press enter and as you can see my efi partition is visible I'm gonna double click my efi partition i will go for efi folder i'll enter the clover folder and i will search for config dot p list so i think this is the one which we are looking out for I'll double click on the config that P list and my config that playlists will use that tool to open itself I will go to boot and I will highlight this - wheat that stands for verbose mode and I will click on this minus sign here right here to remove it from our max bootloader and I will also remove the other entries just to make things clear I think that's it I'm going to restart my computer and check the changes I'll press ENTER on Magnus and as you guys can see the variables mode have been removed it has the Apple logo along with the progress bar this is booting into Mac OS let's just see if things works fine and here we are guys it's asking me to enter the password for my Mac OS I have entered the password and it's into the desktop screen of man so guys we are successfully booting our Mac without variables mode let me just restart my computer and check if I am able to boot into my Windows operating system so this time we're gonna go for Windows 10 let's just wait till the time it boots to the clawed bootloader somewhere press Enter on boot Microsoft efi and let's see if it boots into Windows 10 so it has the loading sign and it's working on something and I'm definitely sure it's gonna boot into Windows OS so guys that's it that's how we do all boot our computer between Mac OS Catalina and Windows 10 thanks a lot thanks for watching this video I hope this video will provide all of the necessary information you guys need to do well boot your Mac OS and windows together on your computer I really appreciate your time and patience throughout this video thanks a lot guys so that's it for today's video guys thanks a lot for watching this video if you guys like this video please give me thumbs up if you guys have any questions in regards to the process you guys can feel free to write your questions in the comments box down there I know this video has been a little bit lengthy but that's how the things work I just wanted to explain things to you guys in a more precise way but still I try my best to keep things simple for you guys do make sure you subscribe to my channel the red button will be right below the video to make sure that you click on the bell I can right next to the subscribe button to get the notifications about my latest videos thanks a lot guys for watching this video I'll talk to you guys the next one peace [Music]

Channel: Adams Tech Guide

Views: 588,084

Keywords: dual boot mac and windows, dual boot mac oc catalina and windows 10, how to dual boot mac and windows 10 on a pc, how to dual boot mac and windows on a pc, dual boot mac os and windows os, dual boot mac os catalina and windows 10 on a pc, dual boot catalina and windows 10 on a pc

Id: fdQivDt10NM

Length: 32min 33sec (1953 seconds)

Published: Mon Nov 11 2019