How to create GD&T drawing in creo | how to apply GD&T symbols in creo drawing.

hello fans will start this wine previously we are already done this part model in clear 3.0 this is the model and I'm going to generate this part drying as per this drawing so let's start first to go to new going three okay I'm going to put the drawing name sport coffee okay you display no hidden here you can use none or deemed using them closed don't bother about this you can see this drawing look like very small so I'm increasing the drawing scale let's look better and I'm taking a projection of the drawing this hidden lines a you say this you real and is trading line here you can see the trading see I'm 42 but this is a pit circle over that we have to create the sketch but before that we have to put the access of this power just click sell a tissue and a preview should have access lines and cylindrical parts I'm going to section because in this view if they are showing section view so as per the drawing I'm also going to put section section section the rejection to increase the hatching lines just move your cursor then it will highlighted double click on it and go to spacing and here half just click on it you can see that hatching lines increased this is a profile you know first of all finish this view here 18 to 45 degrees with this dimension I did attachment just click send to you so automatically turn to this side click it and press ctrl button so that access and middle mouse button just click middle mouse button and release then double click on it dimension 18 to X C it is 1840 but here box is there which is called AZ dimension so again double click on it go to display just click basic this is the basic dimension don't bother these complete boxes in dimension because they may be used for other software so because of the disease which came like complete box for this dimension in creo only it is taking like this and then here 8 holes into 7.9 go to dimension double click on it and mouse button that's it if you want to radius just click once time you will get radius 4 want Daiya then double click it and release very blouse button No again go to display right down 8 into 8 into 7.9 - 8.1 well that here you have to change 0 8.1 let's okay here one option we have to change go to prepare drawing properties to display the tolerance we need to change the tolerance display standard I guess for say okay done and go to change option here type tolerance display just typed all display and hit enter here you can see the no display so we have to change change it to us then say okay now you can see showing that 8.9 9.1 8.1 0.2 okay lemme see here it is highlighted 0.2 c8 into seven point nine minus eight point one now we need to put this box this is called a future control frame first a few told and simple position to always go to annotations geometric toys click geometry toxin select position hold on just here edges symbol isolator or other symbol also is there as per the reference we can take this I'm taking edge just click on this and here first first you click this edge and then go to this option this is here it is mentioned dimension because we have to attach to the dimension so for that we need to choose two dimension and click it and just click it that's it no as part of this feature confirm the values and we have to mention first position tolerance and then they a symbol for that here symbol decimal and then tolerance value 0.14 tolerance value 0.14 and then this symbol my exam material condition symbol for that maximum material condition symbol in tol value metal condition and then datum primary data may and secondary datum C datum references primary data me a secondary datum see with modifier MMC C warfare is there say okay now you can see as per the drawing we have we mentioned like that remaining things also we are going to put 57.6 fifty six point six that means we have the value 0 here minus 1 and select limits as per that 57 so upper was paris' plus minus one zero 57.6 56 point six and then again this one select dimension double click connect middle mouse button click middle password under so and this view all dimensions are recovered now we have more into this view we are going to step by step first this step this step value is 80 mm don't bother this is the wrong dimension 80 mm sorry this is this thickness is 8mm and then come to this step this step or this length and this thickness so here they're mentioned 25 this also wrong dimension so I'm giving the other dimension first click the edge press ctrl button and again second select second edge and then click marilla burn medium middle mouse button to x value 25 so point twenty five point four to twenty five point five we are also giving point one less so this is zero point one and here zero and change the limits 0.12 connect select limits say okay this is not all value okay and next step is this length this length is nine point six two and four four to nine point six sorry my mistake this undercut depth okay first we'll finish this step and then go to inside this is done and then this step six point six and six point one double-click 0.1 to flip the arrows just select them dimension and a hold left the button and then click the right button by holding the left button click the right button then arrows will be flipped just press and hold the right button first select the dimension and hold the left button and then click the right button then dimension will be iris will be flipped and then this value m42 we are going to give a note note they'll see the option with the leader note so select the dimension and again tick somewhere and type 42 into 1.5 pitch 1.5 pitch like this we are adding the dimension and this is also having a future control frame position tolerance first go to selected geometric tolerance select position tolerance action selected and then go to dimension select so this is not because of that is not relating for that we need to create a note go to geometric tolerance select question selected select the symbol here as a free note don't bother about it we'll change it there's imposition tolerance the symbol 0.12 change the value first move your cursor when the book when box is highlighted just click right button and then click two times the left button it will highlighted 0.1 and then I tell a condition it is there already and then primary datum is B and metal condition okay and then we are moved to this dimension 31.8 31.6 with feature control frame click the edge press control button and select another edge and then click very the mouse button two times 31.6 further left zero five two feature control frame go to geometric tolerance select surface select dimension and 0.1 0.1 the data now this dimension dictates press ctrl button middle was bought on two times this is 20 mm there again dimension rotation surface dimension zero point zero six total Torrance I get zero point zero six zero point zero a primarily to me a secondary datum see primary datum differences primary datum a secondary don't see no modifiers okay you can see here and this also finished the job finished this oh sorry we forgot to mention this dimension now we are going to put the dimension they're lovable select surface surface which surfaces that sorry selfish tangent leader yes are all automatic 0.06 first move your cursor click right mouse button and then immediately click left mouse button two times primary datum datum references primary secondary none say okay modifier no modifier so here moving orifice and then we are going to hit this dimension nine point six nine point four nine point four to nine point six double-click on it nine point six to nine point four so upper is zero zero point two okay this is finished this is finished this dimension 41.3 to 40.1 so that is the thickness of the no click on it zero point 0.1 he's also done this is also done no we are going move to flatness feature for that code to geometric tolerance selective lightness he asking for some surface select surface that's really not where it attachment Satan well 0.02 say okay and then this dimension 36.0 here to get the dye assemble go to double click on the dimension go to display click down area and go to state texture symbol click the - symbol say ok here is the datum symbol and here forty-four point six two five two four point two five forty four five six two four two four five so far we covered everything here perpendicular tees there perpendicularity selector surface perpendicularity die assemble zero point zero tolerance display 0.08 and mortified also said and the primary data so we're going to do the dance for that show annotations selective view celeb T detail Dedham created the item symbols are created now we are going to show in the growing also say here highlighted just you can click directly on that item number or you can select from the here also and then say apply okay to attachment first a symbol is attached rotation select dimension click the dimension say it is shown we say at the same properties could select dimension this dimension is not a litter because of this is no dimension that's why it's not related we will try to move some other thing yes it is related to this is it this is the complete drawing asked for this liked if you're going to create the drawing music GD&T thanks for watching and like please like my video subscribe my videos for free so you will get my all latest update videos from my channel thanks for watching bye bye

Channel: Md Khaja

Views: 143,982

Keywords: how to create part drawing in creo, how to use GD&T in creo, drawing tutorial, tutorial for part drawing, gd and t drawing, full gd and t drawing tutorial, how to apply gd and t symbols in drawing in creo, how to insert GD & T drawing symbols in Creo 5.0, how to apply GD&T symbols in drawing using creo, GD&T drawing tutorial, creo GD&T drawing tutorials, drawing with complete GD&T apply, complete GD&T symbols in drawing, how to apply complete GD&T symbols in drawing using Creo

Id: KJdldN4UekQ

Length: 42min 36sec (2556 seconds)

Published: Mon Oct 09 2017