How to CLEAN the Canik TP9SFX

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
[Music] here we are with the takedown and cleaning process for the canik tp9 SFX I've got my empty chamber indicator in there a lock slide back get rid of that we do have an empty chamber all right take down the canik tp9 sfx to [ __ ] it pull the trigger always safe direction always making sure the gun is not loaded then from there we can pull down on the takedown lever with either white oh I'll use both and then it will slide forward and we take the part two parts of the gun this aside take this there's a spring carefully push it with my thumb and then the barrel will come out like that [Music] my first step is always taking patch plugging up barrel and then taking some CLP and drizzling [Music] I do that fairly liberally I'm going to let it sit there and soak I'm going to flip it from side to side to side to kind of coat the whole barrel take a cop hatch we'll see I'll pee on it and now I will run my thumb nail down the spring I'll spin spring try not to get the top catch caught on the end of the spring so I'll slide all the way down spring there by cleaning off any carbon and at the same time lubricating this break imagine there's some way you can in fact I've seen videos where you can take the spring off and then I guess give us a port deep cleaning buddy that is above my skill set clean off everything that's pretty good right there just to see how dirty it is we'll take a different part of our catch and we'll swap out the inside of the slide yeah it's a lot of CLP there I'll go back over and mop some of that up all right the parts that we can easily get and yeah that's pretty very dirty all right rails inside here back you're scrubbing that thing a little bit because it looks a little dirtier than the other parts let's get another patch what kind of mop up some of the CLP with it and some of the earth along with it dad all right we'll help you there and then get there I don't know okay now similarly I'll use this one it's not too dirty CLP bottom this call below receiver Lord knows I'm not gonna put this on youtube to have people make fun of me not knowing the parts of my firearm swap it out for dirty make sure I get all the metal parts all right I'm going to rotate my barrel eight degrees all right not too bad get a clean patch see how that looks since I have them since I can let's use cotton swab to get some of those parts a little harder to get so get that spring that's the thing popper this is the West McCall light this is the Uzi botcher that's that gives no tron there we come pretty good yeesh okay I'm also gonna go where the slide slides hit those rails those rails better with some gunnel that is one dirty slob okay here again I don't know if this is legit or not but what I will do is I will put a drop of oil on each rail and just let it run down by standing in on its end run all the way down well I'm here Mitchell put some oil your to not much this song alright let's rotate that again broke it you can just four friends alright everything's pretty clean let's do the barrel he'll pick that out and we lose our or spanking this at the slightest side right knock it over on camera there's our four snake run the poor snake through about three times [Music] three that's pretty good now I always make sure to clean that feeding part of the barrel again I should know what that's called leave it down in the descriptions below and don't forget to ring that Bell to LIKE and subscribe alright that's pretty good alright there's plenty of CLP all over this thing so it is cleaned and lubed and protected so let's put it all back together it all goes in so I goes that bring those in the lock it and test yeah that's pretty good now finally I take my silicon clock and I get some of that some of the oil off of it also kind of give it a nice protective coat and silicon these eventually get kind of grungy this one's on its last legs but it'll do for a little bit also does tend to come up on the sniffling - so I'll probably wipe it off at the end but there we go nice clean canik tp9 sfx
Info
Channel: aspectratio703
Views: 37,059
Rating: 4.6753926 out of 5
Keywords:
Id: 1jDfbUxevmw
Channel Id: undefined
Length: 8min 48sec (528 seconds)
Published: Thu Mar 28 2019
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.