How to Build a PC - Step By Step - $2100 Lian Li PC 011 Dynamic Build (Ryzen 3700x / 2070 Super)

[Music] what is up everybody welcome to roby tech it's a show dedicated to pc building sometimes tech news and then some mostly sometimes tech deals right so that's a couple times a week and then we also do i mean we also do other things like benchmarking answering people's questions all that other stuff so that's what that's what robbie tech is this show is is live so in other words there's a lot of interactions with there's a lot of interactions with our audience there's a lot of interactions during the show it's not like a cut edited thing um we do like for instance this particular show just like last week's show on wednesday the regular wednesday ruby tech shows are also taken and edited down and just so you guys know also there's anywhere between 600 and up to 3 500 concurrent people about 12 000 people uh who watch the show uh during these livestreams there's a ton of people i see chats not just from youtube but i see chats from mixer and twitch what is happening on the show today well i'm excited because uh we're building in one of my favorite cases this is the lienly 0-1-1 dynamics is a very hot case it was actually built in conjunction with debaur and liam lee it's one of those cases that's very rarely in stock this is a commission build for a guy named tired ethan uh he spent about twee the the budget was just at uh 2200 after tax check out all the build information all of the parts and everything we use are down in the description below i want to caveat this i always like to do this beforehand because these are not optimal parts sometimes the guy wanted the key things for me when he chose these parts is he wanted the lee and lee like the case he wanted all the fans filled in so uh that like basically aesthetics were super important so instead of spending all of the money on like doing like a 2080 super or whatever it was we aesthetically needed to make sure that this build looked the way he wanted so some people were like well why not a 3800x or not why not a 2080 super and just truth be told there was like 400 something dollars just spent on fans alone which could have upgraded some of those parts but at the same time if he wanted a certain look and sometimes people do and he's okay with he's playing 1440p which 2070 super is more than capable of and a 3700x is more than capable of that is why he made the choices he did so if some people wants to go out there guys pcs are a custom thing is specifically custom pcs and so uh if you kind of like before i start the arguments down in the description below or here on chat where he's like why did he do this he wanted to and that's okay it's his money he has that choice and so aesthetics were important and that's where he chose to spend it but let's talk about this build because that's the important thing that's why you're here so at the core of this is the ryzen 7 3700x so this is the cpu we have in here uh this is an eight core 16 thread 3.6 gigahertz um absolutely great piece this is like it's funny because a lot of people ask about the 32 3800x which the 3800x is the same core count and thread count i just really kind of feel like this is you're either going to do a 3700x or you should jump to a 3900x it's not really a whole lot of room for the use of a 3800x so great cpu um really excited about this it should be more than powerful enough so that's our cpu um for motherboard i love this board it's probably one of the best white boards and specifically because we're doing an all arctic this whole build is going to look white we have the prime x570 pro in fact this was actually in stock two days ago um it was really funny when i first started this with tired ethan and he wanted us he was really worried because like his case and his gpu that he wanted specifically um were really hard he was like i don't know when these white gpus are going to be in stock and literally the next day this came in stock his case came in stock and this this motherboard came in stock in fact really what we were waiting for to kind of do this building we did was his psu so this is the prime x 570 pro um you've seen this numerous times on the show uh overall really great board probably one of the best the better looking uh boards from uh asus in terms of just its clean aesthetics when you think about the tiers you have uh prime and then you go to top and then you have rogs this is this is at the top the top end of their lower tier x 570 boards that is a kind of a weird understatement though because x570 is kind of a really top top tier so lots of options dual 3m.2s i think is the option he's got three two two m.2 drives capable he's gonna be filling one um you know just like built-in io shield it's a pretty thick pcb it's got a nice white and black aesthetic that's really why it was chosen more than anything plus it's x570 so he's got pcie gen 4 across uh both the pcie 16 slots plus his uh all his m.2 slots if he were to go to that kind of capability so that is the motherboard overall great motherboard excited about getting to use that let's talk about his gpu here it is right here he was a little worried about this weren't you tired ethan uh white 2070 super this came in stock uh literally the next day uh retail price for this is about 539 bucks it does come in stock every once in a while it's worth auto notifying if you're wanting to get a white gpu gigabyte makes a 2060 2070 and a 2080 version of this particular gpu outside of that asus also makes the 2080 super and the 2080 ti in arctic white the asus asus gpus are quite a bit more expensive um really a big fan of this this thing used it quite a few times it's gonna look really great with his overall with his build uh couldn't be happier um and then again he's looking for 144 hertz 1080p gaming this is more than capable of running that um so he should be absolutely fine for ssd we're using the 6d intel 660p series i like these overall that we've used them a lot they're very inexpensive one terabyte ssds they usually range i got this one for 112 bucks they range between 112 and 119 they kind of fluctuate there they're on sale an awful lot so right now i'm showing it right now at 119 if you're wanting to buy this this particular intel ssd don't buy it at 119. wait till it goes to 112 it'll probably be on sale like next week overall great gives him plenty of storage to do what he wants to do his pc has black and white accents again the the psu is hidden in the back part of the shroud on the uh zero one one dynamic so not a big deal it won't be something that like you will be able to see so uh doing a black psu is fine this is a this is a gold um uh 80 plus gold great psu more than enough power for anything he's going to do so that is the psu we did and again some of the options specifically i just want to be super clear psus were one of those things is like what can we get is in stock that's reputable um and so uh we didn't you just didn't have a lot of choice ram uh white this is the corsair vengeance uh rgb pro uh 30 this is oh this is 3600 i got to go grab the 3200 megahertz kit we have a 3200 megahertz kit um i might have bought a 3600 megahertz kit and you might just be getting 3600 megahertz uh 95.95 um uh basically unless there's a 3 600 megahertz then congratulations you got something free so there's our ram i'm gonna go check again uh but yeah that's the ram that we ended up getting for him i think i've got a 3200 megahertz kit and then finally uh we got our cables these these are not all white just because there's white and black these are actually white and black they don't have those on new eggs so if you're looking for them that's why they're not showing these are the white and black asia horse cables um i love these cables they're gonna look great in this build and it'll add that little pop because there's a black surround so it should actually make it look a little bit better so that is it and then of course and you'll see this a little bit later on but the the great case itself uh the zero one one dynamics uh just an overall just really really great case lots of white and black you can see back there you can see the black where the shroud if you're looking at the screen i'm looking at here down at the bottom that's where the psu is going to be so you're not going to see the psu because it's going to be off in the back so again won't impact how it looks should look really good and it's got a lot of white and black elements in fact you can see they do white and black for the pcie covers there so should look really nice i'm actually pretty excited about this build should come out really clean he is not using an ai oh i did give him the option because i actually got um a uh aio in from deepcool but again uh he like he's got books and he's got a monitor and all that other stuff that he's he's definitely spending the money on so he wanted to make sure that uh he was fiscally responsible okay who's ready to build i think we're ready to build nice dave i like that he's like stop the stop the gun flapping and start the build flapping how's that okay here we go let's check out that awesome board uh what else do we need from here not a whole lot we need from here i also need my m.2 screws actually we're just going to take this out because that is garbage there we go we're just going to see our m.2 screws maybe oh they might already be in i don't remember so many motherboards so little time i think this is a great looking board by the way um overall just very attractive there you go right there i just i love the amount of white the white the silver so for uh just to give you a quick overview here we've got uh this right here these are fan headers uh this is an rgb header this is an rgb header these are your ram slots this right here is your power supply this is your your power right here this is your sata connections down here you also have another addressable rgb these are your front panel connectors these are fan headers this is your usb 3 right here usb 2 and then this is your am4 slot and your am4 slot's super important because this is actually where cpu is um for the most am4 has been supported by uh ryzen for quite a while b450 x470 even b350 these have all been supporting this particular this particular brand i mean this particular slot type so really really good option there up here this is your eps power interesting thing like you know i've been doing a ton of research on eps for the most part you really kind of only need the eight pin this is really kind of a marketing ploy but there are certain boards that if you don't plug this in it will not work i have had that it has happened on the show i can go find the episode most of the time you only need this one uh big thing is is that we also have heatsinks on the vrm so this is completely completely fine in terms of overclockability so should he decide to overclock the only thing he's limited by is his stock cooler because we're using that stock rates prism on this thing uh somebody's asking what an rgb header is rgb header allows you to basically power rgb uh argb headers allowed it to be addressable which means you can change the colors et cetera so and then also we have right here this is your usb or your uh usb 3.2 gen 2 port which is like your fast data transfer rate yeah this board has 5 volt and 12 volt rgb headers yes okay opening up our 3800x uh you want to take this this right here to 90 degrees that's going to allow you to basically uh install your cpu when you grab your cpu here out of the little case throw that in there in the side the key thing here is grabbing it from the sides so when i open this up you want to grab it from the sides here and don't try and touch the ihs so over here you're now looking at your ryzen this is your 37 this is the 3700x uh the key thing here is making sure that you don't touch the pins you try very hard not to touch the top you can touch the top it's just not a big deal you just try not to uh you don't want to do anything to the pins here you don't want to do hey thank you very much for that ember drop try not to touch the pins don't come your tum with them don't cut your comb your cat with them don't stick peanut butter on them don't use them to install house tile you see this little triangle right here this little triangle lines up with a little triangle right here on the motherboard so that little triangle right there the way this works is you're going to turn this over and then you're going to align it it goes vertical not horizontal so on intel you always have horizontal on their lga 115x or on the 1200 on on amd it is actually vertical so we're going to do it like that it just slides right in and then you just kind of click this little rod down and then boom your motherboard is installed for the ram installation so here we go we have our two our two dimms here right here so put this up right here um the way this works is you wanna you have dual channel ram on a motherboard and the cool thing about certain motherboards is like they will actually change the colors uh to to highlight where you should do them to activate dual channel black and black or light gray and gray like in this particular case and so in this one we're gonna stick an a2 and b2 and that's the right place to put it if you only have two uh ram sticks like we have here so okay so when you install this you'll see here on here you'll see a little uh little slot in the pcb that lines with this little slot here what you're gonna do thank you very much for the subscription shadow pretty appreciate that you're gonna do this is you're just gonna slip it in like this push it down and you'll hear a click on both sides same thing with this one you just want to line it up and then slip it in now sometimes these will have multiple clips this one only has one clip sometimes just clips on both ends both ends just want to basically stick this in and then now our ram is installed correctly okay so what we're doing right now is we're just installing our m.2 drive right here let's zoom in on that right there this is our m.2 drive now there's three slots here this is 2242 2260 and 2280. uh 2280 is actually uh the majority of the lengths like 90 of m.2s are 2280 these are the millimeters the overall length of the m.2 itself 2242 you'll see like wi-fi i haven't seen a ton of 22 110s but there is an option there so we're going to put our little standoff here at 2280 and put it in like that and then we're going to grab our there we go and then you can see here on the m.2 drive you see there's a little slot in the pcb there's also a little slot right here just basically slip it in like that and it kind of like balance bounces like a you know a diving board so to speak so yeah that's that's where that's how you kind of know it's installed you grab our super tiny super tiny tiny screw it's going to kind of put it down like that that's how we have it installed so there we go one of the things about this particular wraith prism cooler is that it actually comes with a basically an uh rgb header and then it's also got usb i will tell you right now this is the usb is the best way to control this thing so use usb the only thing that's a little wacky here is that sometimes you don't have the room to go through the back to do this so you might actually have to run it along the bottom here down to the usb slot and then hide it using the graphics card so i just wish and i i'm going to give feedback to amd they should make this just that much longer okay so the waste is going to work is this is going to go into our cpu header cpu header on this one is right here okay this is our cpu header right here so we're gonna plug this into our cpu header like so and then there's two little see these little thing right here these are actual the little clips and they clip on the two little clips right here so what you need to do is you got to do some finagling and then what happens is once it's on you're going to push this from one side to the other and that's kind of how it locks in there these are kind of funky and they take some they take some finesse but you'll figure it out so what i'm going to do is i'm going to push this down and i get this first one on and then i will do the other side and it goes like that okay so the first one's on i'm going to rotate this and then i'm going to kind of work on this other one in its funky state okay so we're locked in there and then like i said once you have that it's both once they're both locked in literally just pull that like that and there now your cooler is installed and then you can do stuff like it's up to you i just have a tendency to stick those down like that and then you now see that the whole thing looks nice and it is ready to go now if we were going to do any overclocking wouldn't really recommend this in fact the 3700 the 3800xt which could use the wraith prism cooler the amd is recommending not using it and does not even come with a cooler because um uh these coolers aren't they're they're kind of at the top end in terms of their capacity it's more than capable if you're gonna running it stock but we're not running it so he's running it at stock so it's not going to be a big deal okay uh only thing we're going to do here real quick is we're going to uh take this little small plug and right here on the bottom of the board is a little plug here so we're going to unplug this and then we're going to take this little thing like this and we're going to plug it in like so and like i said you may just in this case because this cable is not very long what i'll do and just given the black method of the board is that i might run this like this you won't see it you won't see it but then the gpu will actually hold this down and then it'll just basically run like that we'll we'll test it once we get into the case which is kind of at the point where we're at now very very attractive case uh just to kind of show you guys the front here you can see it's got like that silver kind of in the front as well which actually looks really nice um and then overall black um for setting it up pretty straightforward here in the back you'll see there's these two little thumb screws you're gonna unscrew these they are captive which means they don't come out of the slot and this just pops off like that and then once you have that popped off all of these little tempered glass panels just literally just pull off like so what what we'll do is we'll do um pull air through here and then we'll exhaust we'll do a dual exhaust which actually should pull air into the jeep we'll actually pull air into the gpu plus we'll have the air from the fan and everything pulling air towards it so you should get quite a bit of air quite a bit of airflow so pull air in and then exhaust out of the exhaust out of the top and exhaust out of the back i guess we could pull we could actually pull air in both ways so pull in air both this way so maybe what i'll do is i'll pull air here pull air here and then exhaust out of the top that probably makes the most sense so yeah that's i think that's what we'll end up doing in terms of setup and then again we're just going to pull this last one off there we go if you want to find the box of additional hardware it's just right back here roll this off and then we're just going to take out our box of hardware okay so we're gonna do here is we're gonna unscrew this and this is gonna allow us to open up that back panel real quick and just like that our little back plate comes off here put this over here and now we can get to and unscrew this and then now we can get our hardware out so there's our hardware that we need so now our case is stripped and prepped in terms of just ready to uh ready to do our building um what we're gonna do now is we're gonna go ahead and install all of our fans okay let's go and start putting in our fans okay so there's our three there's our and again we're gonna end up running two lighting notes because we have nine fans so we have a lot of fans in this case which always is fun this is gonna have a lot of rgb which is gonna look super sick these are going to look like this we're going to run right through the back so pretty straightforward in terms of installation and then slowly our build starts to come together already and the good thing is with him having the corsair commander like he essentially has another usb hub so he should be good there ooh i just realized he actually has the corsair commander pro which means i could run the cable i can run the the lighting for that into the commander pro and then use the other like have one lighting node pro going to the top that'd actually be better oh i just realized that ooh that's awesome actually [Music] so there's those three those are all hooked up okay let's do our next set of three fans [Music] okay so we're gonna stick our last three fans down here and that is it guys we're at the very end that'll be all the fans now these ones will actually be we're actually gonna be pulling air in so these will actually be pulling air from the bottom in yeah i expect this to actually have very respectable uh temps in terms of just the amount of air these fans are gonna basically have going through here i mean this thing is gonna have like it's gonna be it's gonna just have a lot of air it's gonna be like get out if you're if you're hot get out oh um i am not gonna install these yet i will install these last i forgot about this i do not wanna install these yet because i wanna make sure our wire board our our motherboard and front panel connectors are all wired before we put these fans on i forgot about that okay so we're gonna start our motherboard installation now we do not have to worry about it worry about an io shield because the i o shield is built in so we don't have to worry about that basically grab this see that already looks so good nice and clean there we go boom just like that and then this will be actually i will be able to run up and through and through the back here so i have a single kind of like series of cables that will kind of run these i'm gonna run up here like that okay cool yeah i mean this is where like having that little having that aio would have made a difference because you'd have a little bit more room in it hover some of this stuff but still we won't have a ton of cabling so it should still look really good that white box no there it is here's our magnet block down here it comes with some little velcro cables we're getting those we need our little here we go let's get our start putting our motherboard screws in [Music] our motherboard is in everything is good there everything's all set up there again remember we have a we have a stock cooler so there's just not a lot there's not a lot in terms of installation so we're going to go ahead and run we're going to do now is turn over i'm checking usb-c is here usb 3.2 is here and i don't have any other fan headers and so we're pretty good to go in terms of that sort of stuff so let's go ahead and work on the back of this little rat's nest which is not a ton we have a lot of room remember psu is going here so i don't want to do too much here because we still have our psu to install and just for the sake of simplicity before we do all of our front panel connectors let's get all of our wiring for our fans hooked up here and into our hub etc so we have nine so we'll still need three fans that are going to go into our fan hub but we'll have most of them most of these will go into our corsair commander okay so there's one rgb fan up here so there's number one these are all the top ones there we go these will be one two and three two and three there we go four five and six okay so there is this is our first it's our first um set of cables and actually what i'm going to do is i'm going to fold this and then i'm going to cut it in half okay there is one and then these are all for the commander pro which we'll grab now and i'm going to be sticking another one of these lighting nodes on top of each other so i'm going to stick them up on top of each other which i think will probably end up being the cleanest looking okay so this is going to go through here there we go and this is going to go through here so these are your two these are for your two hard drives okay now what we need is usbc that's going to go right in here this is usb 3. that's going to go down here this is hd audio that is going to go through here and down here let's see what else we have here these are all usb fans fans these are front panel connectors and these are gonna go right here okay and then these are gonna go right in here because these are actually what he needs to hook up his hard drives and we're good and then these are all fans not a big deal um what do i need i need to go ahead and hook up our front panel now on our front panel connectors and they're all sitting over here ready for me to do that with okay so usb 3.2 when you want to do this there's a little notch on the top here and there's a little notch here at the bottom it's going to basically get it as a 90 degree angle and go just like that okay now power switch these are these are our front panel connectors right here what we're gonna do is we're gonna do first one that goes in here is we're gonna do our hard drive light which is the far bottom left one so that goes right there and then next one we're gonna do from here is the power switch and plus and minus this does not have a reset switch so power switch goes caddy corner to that right here and then plus and minus go next to it with plus being the far left and minus being next to it sorry guys i'm trying not to get my hair in the way you can't really see crud there's plus and then there is minus okay so there's all our front panel connectors hooked up again you can see why i waited to do the fans okay usb these are sata so these are for his oh i should i'm gonna run those down below actually so i'm gonna change that this is your usbc so right here that's where usbc is plug that in there's usbc and then hd audio is right here in the bottom on the right it's keyed only one way so you can see here there's a little there's a little there's a little basically you can see there's only one way to do it hook it up and it just goes right here on the far left so i'm going to do is i'm going to run our sata right here which will be our last run our sata down here and then run these other three fans to the bottom and then i'll run our last fans there so that'll basically be all of our connections okay so we're gonna run move these to down here and i'm gonna take all three of these fan headers right here i'm gonna run all of these down here [Applause] and we're gonna turn this over and finish our connections real quick okay here's our three fans right here at the bottom so these are gonna go into the fan headers right here at the bottom there's one honestly i would say about the the in the i would say the nzxt like we had sheldon do a bunch of research on that i would say odds are that that budget for 2k is actually pretty good but i will say you can probably still get a better deal building it on your own um and it's dude the nzxt h1 i literally just built in it last week on wednesday and it was a super super fast build so if you want to do it yourself it's not scary and i have a full guide and walk through on youtube plus live streams but i have like a full step-by-step guide on it on youtube as well so okay so all of our stuff is hooked up now what we have what we have we only have left we have a usb for our commander pro we're gonna put in our last three fans now and then run those so we're on our last three fans and then uh then we'll hook up our commander pro and our last lighting stuff okay last fans and these ones are gonna pull air through one fan has started okay grab our other ones top is exhaust side is exhaust the um the bottom will be intake and there's a lot of room on the bottom to pull air remember this case was designed by in in in cohorts and quartz with ooh okay in cahoots with the fine folks at debaur so who know who know their stuff so there we go now all of our fans are installed so we have another three we have three more fans i'm going to separate rgb now we're going to do is just literally zip tie some of this stuff together because we need to kind of start getting stuff back in control here okay now all we got we got we're kind of a good spot now so we're gonna stick another cool another controller right on top of this one and we're gonna take these two cables which i'm hoping we can just keep connected the way they are so there's that we're going to take this now when you hook these up these have to be sequential so we're just making sure that one two three is on the same side we're just going to stick them on top of each other it's the easiest cleanest way to keep things out of the way now these are going to be one two three one and two and three and given these are all the rgb we're going to clump these together now these will be clumped together and we want to make sure that this is kind of out of the way main reason being is is that remember we still have our psu we want to make sure there's lots of room for our psu here there we go okay and then these are going to connect into our commander pro hopefully we do not have to do this we're going to hopefully the commander pro is going to go right there that is my hope it should still be fine it's not it should make give us plenty of room for our thing okay so there that's that's all of our rgb hooked up so nine rgb fans hooked up all of our other cables kind of controlled we've got a lot of sata that we're going to have to plug in which is fine i'll deal with that when we get to the psu these are all going to go into our commander pro so let's grab our commander pro right here so now for our commander pro again more sata but the big thing is is that we just need to plug in all of our fans and two rgb rgb lighting controllers which will be coming off of this so and when you have a commander pro you don't need to use the lighting node pros so i don't that's why i don't have it those are just in the box you might if you've ever installed these before you're like oh where's your lighting node you don't actually have to worry about that when you use this so these two cables right here are going to go into led2 and led one okay and then all we need is these are our fans and so we'll make this one two and three okay there we go and then we have our other fans which are four five and six four five and six okay so there's all of our fans hooked up now all our fans are hooked up and our led is hooked up so i'm hoping the plan is just literally to stick this right down here so i don't need oh i need to but i will need where is where are you this you this is that's as long as you are jeez you are not very long okay so this is our controller for our that is our wraith right there okay so we should everything goes well actually you might just want to stick that on top of it now then you can't do it you can't get to any of these and that is really against oh i guess maybe oh okay guess what we could do is we could stick it right here i don't want to block airflow i could stick it right here i have the the sticky pads but the problem is is that i still have cables that still have to come through here so i could stick it right there and then that would be okay and it doesn't block any that it does block a little bit but not enough and there's not a these fans aren't doing that much um it's an option i have another place i could it like i'm gonna i'm gonna worry about sticking that out later once i kind of have the psu and everything plugged in but we can do this this has got to go down here and that is our last usb connection there we go cam link what we're doing right now is just plugging in our little bit of usb there we go okay so usb now it's now it's connected okay so here's our cable extensions right here which i think are gonna look really good with his build again black and white this is why i did not put connect the lighting node pro yet because i wanted to figure out how much room these cable extensions are going to cause like what what they're going to be like and so i want to make sure that they're good um so that that's what's important to me here okay so i'm going to quickly can link for now get all of our cable extension combs in [Applause] just putting in this first first cable here right here there we go nice clean look there nice right there in the center i think that looks good okay let's go ahead and we're going to run our one the top left i don't ever put any cable combs on this because it's just going to go on the top like right through here but i actually i'm going to put some on this one because you can see it a lot better i'm just gonna throw a cup one or one or two one or two on this one oh you know what let's realize i do not want to do this because i'm guessing that because this one thing i will say i'm i'm i've i've sent this feedback to asia horse is that i wish that they would actually include two um two of their cables two eps connectors or have sets where you can get two because we now know that like so many of them like you don't want to just run one i mean i could just run one i guess but sometimes it doesn't boot because that one we're going to use a stock cable so we're not going to run that thing okay let's put in our gpu and then power supply gpu time i love i'm excited about this because this gpu is actually all white that's just this is a it's just a pretty pretty gpu see that it's just a very very pretty yeah a new gpu smell right there that's gonna look really good in this case and i always save the gpu boxes because i take the gpu out when i ship and put it back in the case in the box so that way it does not get damaged in shipping that looks good that looks so good in here that is a very clean looking look clean looking look okay now all we got to do is see what our these are going to have to go off to the left so like that and like that there is our okay here we go i'm actually going to move these a little bit higher here we can run our cabling to look up get in your hole there you go yeah okay okay now we're going to start running our little cables here just making sure our cable combs are lined up to the same place okay here we go [Music] let's check out that top down so you can see what the build's gonna kind of look like when it's finished it looks good all we have to do ladies and gentlemen is put in our psu and turn it on and well a little bit of more cable management i've done majority of the cable management as we've gone so let's grab our psu we need our psu i'm looking for that psu cable so i can run that real quick yeah this is the problem i have with these like these particular cables is just they don't these don't have that nice split okay i think that's think that's it okay there now the front of our case is completely done all right let's get our let's get our psu in okay cpu cable we need that we need sata we're gonna grab a couple of these we're gonna have one for his drives now pop this up so you can install all our cables here okay so this is vga there we go this is uh power so we're gonna install that and then and a lot of people ask like you when you want to know which of the p i mean it tells you on the bottom like if it says but these are like where if you want to know how to plug these in they're pretty pretty obvious um like especially like when it says cpu like for the cpu connector like if it splits that's the one that goes in the cpu this is the one that goes into the psu there's that one and then here is our other sata which this is for his drives then we only have one more which is up here this is this other cpu cable okay luckily these are nice and small we're gonna put it in like this just like that okay okay so that gives me lots of that gives me a good heads up in the amount of room i have okay so uh tired i hope you're watching this um let's go ahead before we start connecting everything i'm actually going to put go ahead and connect this down now this is going to go right here [Music] so we have less of a rat's nest we have a lot of rats nest here the rat's nest is honestly rgb anytime you had rgb you just kind of have a rat's nest this is not a whole lot you can do about it and that is just kind of the way of it when you have so many i mean we have nine fans and so when you have nine fans just have a lot of cables to manage okay these are all our sata power i just want to make sure all the sata power cables are in one place and remember there's gonna be like this thing that goes right across the center here so you will not see any of this stuff okay so this right here um this is for ethan ethan here are the two sata connectors and the two sata power that you need for your hard drives you're gonna install so those are gonna be just right there on the drive trays easy for you to find this is the stuff that you need for all of your this is all of your lights your lighting so there's all your fans getting plugged in okay last one there we go okay so the fan stuff okay fans okay now psu i mean cpu only have one here this one goes to this [Music] okay that takes care of the cpu it's just kind of going to be it's going to be a bit of a bit of a struggle here struggle bus here we're gonna kind of have these all kind of push down here okay gpu those are down here okay this is our four pin [Music] okay those are all connected okay last cable and this is the one i'm gonna use to make kind of the whole thing look better and that's this one there he goes now what we do to hide everything because i don't want to tie this down because he still has to he still has to put his kiss thing in here we are going to do this and this will hide most of it you guys ready for the rgb of awesome here we go turn it on lights i see lights do you see lights i see lights and where's the power button right here oh oh no oh so many lights oh my gosh there's so much air coming out of this thing all those fans that is that looks incredible that is so much light that is so cool i'm gonna dim the light so you guys can see it [Music] go [Music] there's your full build right there show the front angle sure i can do that there you go [Music] [Music] [Music] you

Channel: Robeytech Live

Views: 1,224,894

Keywords: 011 dynamic, 011 dynamic build, 2070 super, 2070 super build, 3700x 2070 super build, 3700x build, build a pc step by step, building a gaming pc, building a gaming pc step by step, gaming, gaming computer, gaming pc, gaming pc build, gaming pc build guide, how to build a gaming pc, how to build a gaming pc 2020, how to build a pc, how to build a pc 2020, how to build a pc step by step, pc build, pc building, pc gaming, pc gaming 2020, robeytech, robeytech pc build

Id: YFA2IW-Rn5A

Length: 45min 16sec (2716 seconds)

Published: Tue Jul 28 2020