Head and Face Proportions

in this lesson you will learn how to use anatomy of a skull as well as proportions and virtual geometrical planes of a human head to draw realistic portraits from life memory and imagination human head proportions constructive drawing by Vladimir London before we begin I have to say that the different proportions you see in this video are not absolute rules every person is different and therefore proportions will vary from model to model also a sequence of steps you see in this lesson is not the only way to draw a portrait the way the artwork is done here is to explain the main anatomical features the geometrical planes and the proportions of a human head let's begin with a human skull in the 3/4 view we marked the top and bottom edges of the skull followed by the left and right marks of the head I'm making a drawing from imagination and memory and making the height of the head one and a half times greater than the width an important landmark is the top of the forehead which marks the top edge of the face the height of the face is divided into three equal parts one mark coincides with the base of the nose which is at the same level as the base of the skull and another with the eyebrow level so the distance from the chin to the nose the height of the nose and the height of the forehead are equal in size the outline of the cranium which is the part of a skull that encases the brain has a characteristic rounded shape the central line of the face is an important virtual landmark it helps keep the drawing of a skull symmetrical with this line in place we can decide on the width of the forehead and draw a curved line that separates the top and side plains of the cranium another important proportion of the head is its middle the horizontal line goes through the middle of the head at the level of the eyes the combined dental volume of the upper and lower jaws can be simplified as a virtual barrel the bottom edges of the cheekbones are on the same level as the base of the nose or one third of the face the cheekbone arch goes above the ear canal I'll mark the borders of the cranium bones although their shape and names are not important for the purpose of this lesson the only movable bone of a skull is the lower jaw it connects at the joint beneath the cheekbone right in front of the ear canal at the top it's vertical part splits into two portions one is for the joint and the other is for connection with the chewing muscle it's good to check that the jaw is parallel to the face the angle of the jaw is on the same level as the teeth a nasal bone is at eye level or in the middle of the head the nasal cavity has the characteristic shape of a pear eyesockets are not round their shape resembles a trapezoid the Energy AMA tree of an eye socket forms a pyramid that points into the Scala it consists of several bones inside there are gaps between the bones for the optic nerves and blood vessels it is important to mark the two bulging points at the top of the forehead they are good landmarks for the planes of the cranium the frontal bone has a semi spherical shape the brow ridges are more prominent in male models and protrude less in females the skull has a characteristic smile I won't mark all the teeth just a few to indicate their scale the spine connects to the skull in the middle of the base right between the two ear canals it is important to visualize this place in order to connect to the head and neck correctly in drawing from this point of view I decided to place the level of the seventh vertebra just below the bottom edge of the chin vii vertebra is an important bone of the spine this is where the neck ends the base of the neck is depicted as an oval this oval is tilted at the back it is just below the seventh vertebra and at the front it is about two vertebrae lower the dimension of this oval is approximately half of the head height the top part of the breastbone is an important landmark it's top edge is that the pit of the neck level the first pair of ribs which is marked as an oval and drawing connects to this bone a tilted straight line represents the direction of the shoulders it is seen in perspective The Oval of the first pair of ribs is the narrowest part of the ribcage from these ribs the ribcage slopes downward and becomes wider in many models the distance between the chin and the pit of the neck is the same as the distance from the chin to the nose the two collarbones also connect to the top part of the breastbone just above the first ribs each collarbone is twisted like a bicycle handlebar first it bends around the neck and then points to the shoulders end we see collarbones in perspective and the one on the left-hand side appears foreshortened at the end the collarbone connects to the shoulder blade I won't be going into anatomy of a shoulder girdle in depth because this video is dedicated to the proportions of the human head if you want to learn more about Anatomy you may enroll in the anatomy masterclass the head of the upper arm bone has a spherical shape which gives great freedom of movement in the shoulder joint in our drawing the two arms are hanging down and the shoulders are relaxed the second pair of ribs connects to the breastbone at the place between the top part of the breastbone and its body the second ribs form a slightly bigger oval than the first pair you may notice that the first pair of ribs points slightly upward from the breastbone the second pair goes outward horizontally and the third pair of ribs points slightly downward from the breastbone all other pairs will point downward at an increasing angle good understanding of the anatomy and construction of the shoulder girdle will help to connect the neck to the shoulders correctly in the head to the neck the upper outline of the shoulders is formed by the trapezius muscle we can mark this outline as one continuous line from the end of one collarbone to the other at the top this line curves around the 8th of vertebra the back outline of the neck is defined by the upper portion of the trapezius which goes to the base of the skull the deltoid is another form shaping muscle it's back portion originates from the spine of the shoulder blade and the middle portion from the lateral edge of this bone one of the main muscles of the neck connects the top of the breastbone and the medial part of the collarbone with the process at the base of the skull this muscle spirals around the neck from the pit of the neck to a spot behind the ear the pair of these muscles form a characteristic v-shape at the pit of the neck in another of the life-drawing Academy video lessons you will discover all the facial muscles that influence the shape of the human head and play important roles in displaying emotions now let's make another drawing of the head stylized with planes I'll make this portrait on the same scale as the previous artwork the purpose of this exercise is to see what planes shape the human head the drawing begins with marking the top bottom left and right edges of the head the outline of the cranium repeats the shape of the skull the outline of the face is approximate for now the line of the eyes divides the height of the head exactly in half the top of the forehead indicates the upper border of the face the full height of the face is divided into three equal parts from the chin to the base of the nose and to the brow ridge line a virtual central line of the face will help to draw facial features symmetrically one third of the face can be measured down from the chin this is the location of the pit of the neck as illustrated in the previous drawing the neck muscles form a v-shape from this landmark the muscles outline goes from the breastbone to the process of the skull behind the ear this process is located on the same level as the base of the nose we can mark the seventh vertebra at the level of the chin the round base of the neck is depicted as a tilted oval that spans from the pit of the neck to the base of the seventh vertebra we could use the same tilt of the shoulders axis as in the previous drawing the top outline of the shoulders is marked as one continuous line from one collarbone to the other the outline of the neck connects the base of the skull with the base of the neck the pair of collarbones is a very helpful landmark that will help to locate various muscles there are no muscles above the acromion of the shoulder blade that is why the outline of the deltoid muscle comes very close to it the width of the forehead is an important measurement in portrait drawing this dimension can be measured on a model in real life or based on other dimensions one third of the face for example the outline of each face is individual it is a virtual border between the front and side planes of the head the bottom edge of the ear is at the same level as the base of the nose and it's top edge is at the brow Ridge level Mark said thirds of the face can be used to locate an ear the line where the ear connects to the head is not strictly vertical but slightly tilted it usually has the same tilt as the vertical outline of the lower jaw here's a virtual line that separates the roof of the skull from the forehead another curved line separates the top surface of the skull from its side to define the direction of light which comes from the top left and to establish light and shadow areas of this portrait we can shade the side of the neck and the side surface of the head with very light pencil strokes also a cast shadow is applied under the lower jaw it is very helpful when you can see and use straight lines in complex drawing it is easier to draw straight strokes at correct angles without getting confused with the varying curvature of smooth out lines we can check that the contours of the cheeks are symmetrical and parallel the plane under the chin is also easier to define with straight strokes needless to say the chin has to be parallel to the rest of the face the curve of a brow Ridge separates the brain casing from the face this curve is pointing to the bottom end of the ear the plane under the brow Ridge is turned away from the light and therefore can be shaded with very light pencil strokes as one unified surface another important virtual line of the face is the cheekbone curve the area below that curve is also turned obliquely to the source of the light and is slightly shaded in drawing the bridge of the nose is approximately on the same level as the upper eyelids there are several small planes above that line that depict the geometry of the brow Ridge there is no one strict rule about how many planes of a face there are nor every plane shape every artist can come up with his own interpretation of a faces geometry you are welcome to draw a low polygon face or go into small details in as much depth as you wish as long as the planes make sense and serve the purpose of defining the surfaces of a face they are helpful in understanding the human heads construction and useful when it comes to rendering tonal values a beginner often has the following challenges among others when drawing a portrait depicting the correct proportions of the head making sure the head is symmetrical defining the surfaces of the head seeing and portraying correct tonal values and applying strokes of tonal rendering in the correct direction all these challenges have one thing in common misunderstanding the heads construction and geometry that is why drawing a simplified human head with virtual planes is a very useful exercise to do if you haven't done it so far it is easier to control their proportions and symmetry of flat sided geometrical objects than to manage very complex organic shapes like a human face apart from geometry virtual planes greatly help when it comes to rendering tonal values it is very easy to tell if one plane or another is turned towards or away from a light source should it face the light its values will be lighter Planes oblique to the light will be darker also the direction of hatching strokes can be applied along surfaces of planes revealing the three-dimensional nature of a human face and head as you can see I draw all organic smooth surfaces of a face as a series of straight lines that form triangles and trapezoids there is no limit to how many planes you can draw smaller the planes the more defined the shape will be with lower polygons planes a shape will be simpler let's come back to the drawing the eyeball has a spherical shape and therefore it is better to draw it that way rather than to go into polygonal division the eyelid however has an interesting shape it would be useful to sum divided it into several flat planes to show which ones are turned towards the light and which are angled obliquely an eyelid is a very delicate muscle but nevertheless it has its thickness which has to be depicted in portrait drawing for a more realistic look let's draw a irises with pupils when it comes to rendering the tones of an eye you need to remember that the white of the eyeball is never pure white also there is always cast shadow under the upper eyelid when the light comes from above as a sphere some of its surfaces are oblique to the light and quite often it is darker than the upper eyelid the distance from the base of the nose to the chin when divided in half gives an approximate location of the bottom edge of the lower lip the distance from this mark to the base of the nose can be divided into three equal parts these marks represent the top edge of the upper lip in the line between the lips not every models mouth has the same proportions but you can use this rule and then check the precise location in life a virtual symmetry line of the face helps to position the groove above the upper lip centrally the outline of the upper lip resembles a widely spread letter M or a Cupid's bow the surface of the upper lip is turned obliquely to the direction of a light and we can shade its whole surface with the light pencil strokes there are two straight virtual lines that connect the top corners of the upper lip with the chin these lines also go through the two corners of the lower lip and define a virtual plane that helps to make the lips and chin symmetrical the border of the front surface of the chin has to be parallel to other lines of the face there are a couple more planes beneath the mouth one is facing the light source and the other plane is in shadows it is important to keep the horizontal lines of the face in drawing parallel to each other we can check this rule with a pencil the science surface of a nose is not totally flat facial muscles shape this area giving a characteristic appearance to the nose please note this shape can vary from model to model the bottom edges of the cheekbones are at the base of the nose level however the muscles and flesh covering the bones make it more difficult to read there are different ways of defining the planes of the cheeks I will demonstrate one of them imagine that a cheek can be simplified as a hemisphere its round shape varies widely from model to model there is no one rule how to define the plains of the mouth chin and cheek areas in each particular place you may observe a model and decide what planes are more characteristic using helping lines of planes is a good way to make sure that the construction of a head in drawing is correct many beginners have troubles when it comes to drawing an ear here's a good tip learn average ear proportions and construction when you know this and can draw it from memory you will be able to see deviations in shape and proportion in different models and you will have no difficulties fine-tuning the ear shape in drawing to make it lifelike the most characteristic muscle of the neck connects the protuberance at the base of the skull with the breastbone in the collarbone this muscle has several functions and in drawing it serves as the border between the front and side plains of the neck the throat has a different angle to the neck and this forms the different planes of the neck one of the ways to depict those planes is to draw a cross contour out of the neck an eraser takes some tint off the paper this can be used to suggest highlights and light areas in drawing the lower half of the throat is turned obliquely to the direction of light and can be shaded slightly when the planes are in place it is much easier to render tonal values pencil strokes can be applied along the surfaces of planes of course in portrait drawing I won't be making strong borders between the plains the purpose of this lesson is to demonstrate the relationship between the skeletal Anatomy its Plains and the smooth surface of the head so let's continue drawing a portrait once again I will make the portrait on the same scale as the previous two sketches the same proportions and dimensions will apply here the height of the face can be divided into three equal parts not every models face will be divided perfectly into thirds the base of the nose is also the level of the bottom edges of the cheekbones and the lower end of the ear the virtual line of the brow Ridge is parallel to the base of the nose one of the main proportions in portrait drawing is the line that marks half of the head which coincides in majority of cases with the line of the eyes this line is also parallel to the base of the nose and the brow Ridge lines the width of the forehead is another important proportion in the 3/4 view portrait with that in place we can outline the forehead the outlines of the face follow the same principles as in the previous drawing of course transitions from plane to plane are smoother here the width of the face is also marked has an important border between the front and side surfaces of the head the top edge of the ear is on the level of the eyebrows well it's lower edge matches the base of the nose level the line where the ear connects to the head is slightly tilted of the average ear is twice its width one third of a face can be compared to the distance from the ear to the eyebrow it is also equal to the width of an eyebrow the same measurement can be applied from the chin to the pit of the neck the level of the seventh neck vertebra is about at the chin level the pit of the neck is about two vertebrae lower the axis between these two points is tilted this axis is very helpful when it comes to drawing the base of the neck which is close in size to the first pair of ribs the base of the neck is marked as an oval the dimensions of this oval is approximately equal in size to half of the height of the face the two outlines of the neck naturally connect the head and shoulders another landmark of the neck is its main muscle which spirals around the neck cylinder we can mark the same tilt of the shoulders as in previous drawings it is better to draw the pair of collarbones as one continuous object the upper portion of the trapezius muscle forms the top outline of the shoulders it is also better to draw this outline as one continuous line from one end of the collarbone to another to define the global light we can shade the side planes of the head and neck in very light pencil strokes the tilt of the Chin's bottom plane can be compared to the tilt of the top of the head the brow Ridge line separates the forehead surface from the eyes area this line points to the lower end of the year we can also apply very light shade beneath this curved line another curved contour of the head defines the cheek plains light Falls oblique ly below this line and therefore this area can be shaded as well now we are ready to mark a virtual centerline of the face this is the line of symmetry the bridge of the nose can be placed with precision using that line of symmetry the upper eyelids are on the same level as the bridge of the nose when drawing eyes always remember that the distance between the eyes in most cases is equal to the width of one eye you need to make sure that the planes above the eyes are tilted parallel to each other the shapes of the eyebrows are individual anyway it is more important to get the skeletal construction right than the design of the eyebrows the upper eyelid is not a symmetrical arch its top point is 1/3 from the eyes inner corner when light comes from above the upper eyelids always catch it and our light intone some erasing might be required to portray this light area before finishing with the eyes we can take some care with the nose it's bottom plane can be placed with precision using the central symmetry line this plane is in shadow the width of the nose is about the distance between the eyes make sure to check this alignment using a vertical virtual line that runs from the inner corner of one eye in many cases in the 3/4 view there will be a small gap between this line and the wing of the nose the shape of the nose is individual go easy with its outlines instead of drawing the front plane in pencil I'm erasing the highlight to mark the border between the front and side edges of a nose when drawing the lower eyelids always remember that these delicate muscles have thickness that has to be depicted in drawing the lower eyelid is also not symmetrical its bottom point is 1/3 from the outer corner of the eye there is one junior mistake you may want to avoid drawing individual eyelashes by all means indicate their presence as one unified Mass but think twice before beautifying eyelashes with makeup especially in male portraits the surface of the lower eyelids is in shade when the light comes from above the white of the eyeball is seldom light in most cases it is darker than the upper eyelid which catches the light you may check drawings by the old masters who did not draw eyelashes in a multitude of separate strokes often the upper eyelids partly covered the irises while the lower ones may only touch them or there may even be gaps between the lower lids and the irises there is a drop shadow beneath the upper eyelids for the ice to look in the same direction in drawing you need to make sure that the irises of the eyes are equal in size and have the same shape heiresses have gradations of tones which must be depicted to look natural for the nose to look believable it is important to define a border between the noses bottom plane in wing sides only when this border is in place can we mark the openings of the nostrils on many models the bottom edge of the lower lip is exactly halfway from the nose to the chin I will use this classical proportion in this portrait the mouth can be divided into three equal parts the middle mark would be the line between the lips and the top mark is the upper edge of the upper lip the width of the mouth has to be checked in relation to the eyes the groove of the upper lip is marked symmetrically using the central line of the face when it comes to drawing the mouth there is one helpful tip you may use draw three touching circles one in the middle of the upper lip and two beneath it filling the lower lip this rule works for full-face portraits as well as for 3/4 views the line between the lips weaves around three circles the upper lip arches as a Cupid's bow and the lower lip embraces to circular outlines the upper lip is a bit wider than the lower one use two vertical lines that run from the top points of the upper lip to the corner points of the chin check that the corners of the lower lip are on those lines define the frontal plane of the chin making sure that it's top edge is parallel to the other horizontal lines of the face there is always shadow beneath the lower lip when light comes from above the lower lip catches the light and highlights can be marked with an eraser I also use an eraser to indicate planes with light tonal values a hairstyle naturally repeats the outlines of the skull at a distance that represents the thickness of the hair mass I won't spend too much time talking about how to draw a hairstyle because the topic of this lesson is the human heads construction planes and proportions however you need to keep in mind that a hairstyle must also be treated as a physical mass with its planes and volumes I hope you understand the importance of human head anatomy geometry and proportions when it comes to drawing a portrait from life memory or imagination not every proportion is an absolute rule he will find models with different proportions but knowing what proportions to check and how to make sure a head has sound construction in drawing is very helpful I will render the tonal values a bit more before finishing this artwork of course this video does not cover every aspect of drawing a portrait in the 3/4 view in this course there are other videos dedicated to drawing portraits from life even though this drawing is done not from life but from imagination you can see that a model is not always needed to make a recognizable portrait the universal rules of constructive drawing are very helpful skills every artist must have to make proficient artworks I hope you have learned a thing or two from this video lesson in the life-drawing Academy you will learn much more about the anatomy of the human head including construction of a skull in the main muscles of the head you will also discover what muscles are involved in displaying emotions on human faces above all you will learn how to draw realistic portraits from life step by step to learn all you need to know about drawing human figures and portraits from life enroll in the life drawing academy now you

Channel: Drawing Art Academy

Views: 502,452

Rating: 4.971241 out of 5

Keywords:

Id: sGCSDLm0aXQ

Length: 42min 6sec (2526 seconds)

Published: Sat Mar 28 2020