Fullstop Security Nemesis Plus FNP300 set-up video

[Music] welcome to the fitting video for the full stop security nemesis plus wheel lock for motorhomes and camper vans first we will go through the contents of the package nemesis plus shield plate wheel bar locking portion pin grip adjustable pin one millimeter spacer ring three millimeter hex key set of keys lock cap 19 millimeter wheel wrench adapter m14 receiver wheel bolts before the product can be used two of your existing wheel bolts must be removed and replaced with receiver wheel bolts locate a non-engine driven wheel and remove the two required wheel bolts ensure that the chosen locations are opposite one another as this will provide two fitting locations when installing the nemesis plus the receiver wheel bolts can now be fitted using the wheel wrench adapter the receiver bolt should be tightened to the correct torque setting for your wheel [Music] locate the adjustable pin into the wide aperture in the back of the plate and slide it down into position fasten this in place by screwing in the pin grip into the threaded hole on top of the adjustable pin the adjustable pin and wheel bar are designed to slide in and out as necessary depending on the scale of the wheel and where the receiver bolts have been installed before using the device it may be necessary to add spacer rings to ensure that the back face of the shield plate is as tight as possible to the face of the wheel to check this install the locking portion through the aperture in the shield plate guide the end of the locking portion into a receiver wheel bolt as far as it will go if the shield plate is tight against the face of the wheel then no further adjustment is required if however there is a gap between the back face the shield plate and the face of the wheel then spacer rings must be used once satisfied with the fit between the shield plate and the face of the wheel the spacer rings can be retained in place by securing the lock unit into the shield plate do this by tightening the locking portion hex screw using the supplied three millimeter hex key the nemesis plus now ready for use you

Channel: Purple Line UK

Views: 2,327

Rating: 4.1111112 out of 5

Keywords:

Id: ZMX_P2gr2GE

Length: 3min 0sec (180 seconds)

Published: Thu Sep 17 2020