Fresh green paint for the 4640 restoration!!

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
we're gonna auction probably and [Music] hey guys how's it going today well we're having a painting party in the shop here tonight Rob didn't know he signed up for this when he showed up to get his Jack in his blocks back but he could have said no when I asked if he wanted a can - so run another paint yeah exactly the NB Hulk a note that way off T but I better get back and do a little bit more painting here and we'll talk to you again in a few almost like you've done this before Rob other things though this I'm going to do tomorrow because I got a bit other around to do with it yes and then this the primer is still drawing you must be almost out of paint eh drop my cam yeah we do that with that candle the bottom of the frame there needs to work and then tomorrow we just got to do the black here yet that'll be the next part of this video but we'll keep on paying things straight one one's gonna set up the painting late on a paint a well it's a few hours later about nine o'clock at night here now and I just come back and put another coat on so that'll be it tomorrow these got to get flipped and the other side's painted they're a little bit too tacky at the flip so I left them be but and then I gotta paint this guy black because you got some overspray and drips on them saying what the manifolds got a few spots but other than that I think it turned out pretty damn good if I don't say so myself looks like there's a run there but there's runs on this tractor all over the place from the factory and I like sanded it down to primer primed it painted it you can see the run you run your hand over it you can't feel it but you can see it I don't know how that works but whatever anyway there's a bit of touch-up we got to do back here and then I got to do the black yet around the bottom half of the cab on the back and then the pillars does not have you and then the green on the very top of the roof but that's a Tomorrowland kind of job so I'm gonna go in the house and wash my arms and go to bed so I guess we'll talk to you guys in the morning yep still green and shiny nice well I took some of the fun things I'm talking to myself again kinda em took some of the tape and paper off and on the lines and the circulating heater and what-have-you and I think another antwon's because he's tightening up the ICI pump again but I put a new whatever you want to call that donut in the middle there because the old one ethanol like it was getting pretty well burnt out cuz is just puke and smoke under the hood so makes new shiny one in there hopefully that seals things up a little better anyways but anyway I'm gonna keep on going I got the block done - I see anyway keep work and we'll talk to get in a bit one side that's all up with the way your wheel and clear-coated shine eat this I got the first coat done on [Music] put another one after and then this is our adapter plate dad made for the loader it's upside down right now that's gonna get flipped and then fun but you'll see it when it's on there but that's gonna go under that's gonna incorporate all these holes it's gonna bolt on there and drop down up and then it's got that channel iron in between there to keep it from twisting and then those big boxes on there will bolt it but you'll see that when it all goes on there but I took a little bit of paper off just to get some light inside the cab one got all the injection lines put back on now we're working on putting their filter on and there is a straight pipe in the work port don't be depressed without going on there for now because the guy order my plates from is having a hard time getting his shipments because it's Christmas time so all that'll look just as good for now anyway and then this is the weight bracket that we had made and it's gonna get custom of five peda to get a little bit again there's gonna be plates for parts that come off of here and then the arm those arms there will come down and attach then run along like this so we aren't using those bolt holes there the weight here that way it'll be on the other side but you'll see it it'll all look good and then off of this who will be our like straight pipe Baker's our nose guard but that's kinda where we're at for now [Music] boss shut up and just walk her home for a few minutes and that's probably where all Eva smile for the people punch what wave because they everybody likes [Music] [Music] I gotta get a nice shiny can to put in there for display purposes better than the old white and that's been in there for [Music] and a touch up around these yet this one drips oil so is collecting it there's a bit of work to do it yet well Gator but laughter I'm gonna leave you guys I guess so make sure you hit that like button and subscribe for more like the video leave a comment down below go check out straight pipe makers if you haven't he's a good ship I'll talk to all you guys in the next one thanks for watching [Music]
Info
Channel: South Sask Farmer
Views: 18,870
Rating: 4.9676471 out of 5
Keywords:
Id: k9-vUt8su-g
Channel Id: undefined
Length: 11min 21sec (681 seconds)
Published: Wed Dec 18 2019
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.