First Dyno Pulls With Ruby's 98mm Turbo!!! There's a BIG Problem We Can't Seem To Figure Out...

if it isn't alec mick skeeter doodle bops all right so you're the og freedom factory employee first ever yeah still riding it's hat's tight right that's really tight we'll check it out you get the first official grab the second one freedom factory patch hat what that clean dude so clean i love them hell yeah the only one in existence right now you know come on oh yeah just kidding there's like there's hundreds of them i got the first one though you got the first one baldeagle.com boys all right so the hats came out amazing and then we also added a bundle with my favorite sunglasses the cleanest heatwave red white and blue sunglasses so you can get this hat and these sunglasses for a deal we got that bundle available right now as well as we have the freedom factory heat waves with the freedom factory patchat that you just saw for the same deal just trying to feed your deals and there's even a jack stand jimmy patch hat now and you can get that hat with a t-shirt in a bundle so we added a bunch of bundles for you guys all right so this shirt that i'm going to show you was the girl's idea and i think it came out pretty awesome so you got the red cletus logo on the front and you have the track guys logo on the back with jack stan george and i which it's pretty hilarious like i i didn't know about this idea but it came out freaking hilarious you know you guys can tell what this is to spin off of and it just turned out so funny and awesome so that shirt's also on the website now and then my boy nate we carry dr tuna balls merch now and check this out on baldeagle.com you can get the if you ain't bending you ain't sending a doctor to them all t-shirt pretty amazing now i don't know if i've showed this one yet but this is the jack stance skull it the skull mullet shirt and then listen guys we're almost out of this merch the this tree ain't seasonal drag racing el camino t-shirt we have a few of the christmas sweaters left the santa gotta turbo ugly christmas sweater and then i know we got a lot of these left we got the ls george buenos diaz t-shirts available now you guys head over to cleatswingfront.com after the video but we got some live action to get to let's do it hell yeah brother you're on the policeman far on youtube channel there you go look at that driving the shyster wow george i'm taking your job how your plugs looking huh the first one straps oh could have something to do with our uh fireball so slightly so this is the first one that's the first one all right we'll report back when they're all out yeah all right guys we got ruby strapped on the dyno and today we're actually going to be switching her from her terminator computer over to a dominator which is the highest level ecu that holly sells she's just ready for it i don't want to hurt an engine because we are limiting ourselves with the computer the terminator does a great job and now that we're running bottom sevens we need data logs every pass sometimes we have issues with the terminators data logging we just need some more inputs and outputs so we can run this thing to the max oh and this happens to be their new dominator lightweight edition so it's like two pounds lighter than the old computer yeah check that out pretty neat new cord and it matches ruby perfect it's nice and light so they have some new potting in this one made it a little bit lighter and as far as we know the terminator just unplugs and you can plug the new dominator in you just have to switch the tune over and we'll be ready to rip all righty ruby's first fire up with the dominator see if we can do it nothing really hoping it was going to hit first try at least it's got uh rpm signal might be something else okay i realized what it was i didn't hit the fuel pump button now we try it [Music] ruby is running on a holley dominator for the first time [Music] dude the torque tube is making some new noise that torque tube is always rattled but rattling a little bit spicier than it used to it's kind of scaring me so zach is putting a new boost controller solenoid up in the front of the car and we're changing a couple things around your computer updating everything and we're gonna try a dino bowl here in a minute it really does sound like it's coming apart all right guys we're going to hit real quick no boost controller trying to see if this thing's gonna backfire because it did in the parking lot the other day we were losing rpm sink and we need to see if he's gonna do it again so [Music] we looking like 889 889 no boost oh you know what i did a system log because i was trying to read the uh yeah but it didn't backfire i can read the cam crank signals if you do a specialty data log but you don't get to see what it made but i think it made seven pounds of boost it's not that with those new gates it's actually working really good so they're having two of them controlling each other that motion merge really flows really well yeah oh yeah that's the first test of the motion merge on one of our cars too so that works really good seven pounds of boost 889 don't know what the timing was probably do one more like that see what everything shows in a normal data log and then we'll make some more hits [Music] that was spicy not in a good way that was a good test of ty's welds well i did a normal data log that time so now we're not going to see what we need to see because didn't do the first time we did the second time right at 7 430 100 70 430 rpm it lost cam or crank signal we all know which one now with those backfires i mean that was only seven and a half pounds of boost imagine that at 30 what damage it can do so i don't know what we're gonna do about that i could rewire i could run new three wire yeah i think we need to check our wiring see what's going on because we have two brand new sensors new crank signal our new crank sensor in the cam sensor something's not right yeah i think we should just go ahead and rewire them take everything out the equation what do you think about that kit sounds good held its first backfire how was it well it did it once before but that was a really good is that a cam or a crank signal phaser backfire or was that a [Music] the 901 yeah got to put heat in your motors 901 on horsepower 902 well at least we know one thing the new terpsky makes boost and ties welds holds boost so that's good and a big backfire straight freedom what do we have going on here oh prank yeah dude imagine that exploded yesterday can we spin it over and look at the uh electric wheel we did how does it look it's fine it's center of a hole but it's only happening at higher rpm heavy load can you take a pry bar and see how much play is in this crank crank walk as they call it nothing try the other direction hold on hold on all right good [Music] it's not moving in there when i had it all part checking and found the uh counterweight was hitting the old crank sensor yeah i checked it with feeler gauges and it's got you know five foul of play back and forth and that's usually what it is okay that's normal but so if it's getting loaded and flexing that reflector wheel it'll cause a break okay all right well let's start by pulling the transmission and maybe we can get one overnighted and see what we can do right when you unbolted it holy toledo dude if that exploded on the dyno yesterday catastrophic that would have been so bad i mean that could have ruined the transmission it could have hit the fuel tanks damn i wonder how long it's been broken i did a burnout on it yesterday or a couple days ago i didn't do anything just like tetris wow ip how is the other one coming out too though i don't know what all three of them are broken so how is it driving the converter oh it was just it was literally just loading holding them but if you look that is insane it had cracked and then see the clean break yeah it had broke it was cracked for probably a little while literally just broke is what it did dude that's insane that's money i couldn't even cut it that yeah if i were to cut two spin it over i mean how long have those lasted though james years yeah i mean those that's the one that we put in when we put the paraglide in no way that is insane wow yeah look how that's how it was driving for who knows how long [Music] [Applause] [Music] [Applause] [Music] so [Applause] [Music] hmm [Music] [Applause] [Music] [Applause] [Music] [Applause] [Music] [Applause] [Music] [Applause] [Music] [Applause] foreign [Music] all right guys so our buddy elijah brought over his c6 torque tube and we are going to pop this thing off so we can test tomorrow we got really lucky because there's probably only one other guy in florida who has a corvette power glide kit so and he's just so happy to not have in his car so we're gonna borrow this replace his and we'll be good to test in the morning and then you are doing some wiring right some fresh wiring for the crank signal yeah we're just going to go ahead and take everything out the equation brand new wiring brand new connector terminals new sensor okay cool yep everything we could possibly have the data log indicated that the crank sensor was the problem and the reluctor wheel looks fine so yeah we'll see yep all we can do is try yep got a little care package from motion erase first we got a holley dominator mount so you can mount it right up to your roll cage and then we got the dual mac valve boost controller mounts so we're going over to a different boost controller and then we also have the cable saver so you can't rip your usb cable out of the computer and then we also got this little doohickey that goes on the end of your parachute cable because we lost ours and now that'll save the little clip so we're waiting on the park to show up and we'll slap ruby back together all right so we just ran ruby for the first time we got the new torque converter flex plate in and we got the new uh crank sensor and all that stuff wired into so yeah a couple more things ty's working on catch can line right now but the car started up sounds good so on the trailer it'll go still wheeling [Music] is that your first time parking up there yeah dude that was extremely scary oh my god you're good brother all right guys parker got dr pepper running with the new motor ruby's done so we're loading on the trailer with the blazer and we're heading to kevin tomorrow to do some testing built there's a blazer ready to go excited to see what these cars are going to do we're running mullet tomorrow ruby it's going to be amazing that's it for now he's watching newfoundland we'll freaking see you later [Music] you

Channel: Cleetus McFarland

Views: 814,791

Keywords: leroy, 1320video, drag racing, boosted, cleetus McFarland, cleetus, McFarland, Leroy, bald eagles, bald eagle machine, 1320, modified, boost, turbo, twin turbo, precision turbo, Texas speed, Texas speed and performance, Fasterproms, tuning, tuned, burnout, stick shift, six speed, corvette, Leroy Vette, c5 corvette, Chevrolet, unicorn, c5, supercharging Leroy, turbocharging Leroy, freedom factory, ruby, auction corvette

Id: CVw-oFNe_9w

Length: 16min 8sec (968 seconds)

Published: Fri Dec 17 2021

Reddit Comments

[u/JackstandJ]

This week, the gang does some preventative maintenance

[u/chaseoes]

If you want regular heatwaves, Madi has her own promo code for their store on her Instagram since they sponsor her swimwear company.