Download and install GNS3 Virtualbox and MikroTik CHR image version 7

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
hi there the smart haddad here again so in this lecture i have to show you what are the softwares that you need to download and how you can install them and of course before doing that i need to check if my computer meets the requirement that as i said on the the last lecture so regarding the processor regarding the ram so to check if it has all what we need to have in order to be able to make the uh microtech router s emulation on this pc so let's start directly with the first one check if your pc is a 64-bit architecture remember the processor of the pc should be 64-bit that's the first thing that i have said in the previous video so how we can know that from our computer you can go directly to this pc which is over here and from here you can just go to property and from here you can check you can see over here if we go here on the system type you see it's a 64-bit operating system x64 based processor so we know now that it is a 64-bit processor what about the ram how can i know about the ram so you can see here the installed ram we have 12 gigabyte of ram and the requirement is that to have a minimum of four so 12 is much more this is the best way to check if your computer is able to have the gns3 with the chrome image working on it now if you want there is another way also you can just go to the comment prompt on your windows and write system information so system information if you just write it you get something like this window so also over here you can get some more information but this is what you see here system type is the 64 as you can see here and over here you can see that this dram 12 gigabyte so of course this computer also i have some capacity on my hard disk so that means this computer i can use it to make the virtual router os that i need to install it on the computer using the gns3 point number one is done point number two download the latest gns3 software from gns3.com website so remember we need to have the gns resoftware and then we see we need to have also the visual box which is from oracle and we need to have the chr mic text search our image version 7. so first we need to get the gen x3 software so how to do that we have to go to the website so i have made already all the websites ready here so the gns3 as you can see it is gns3.com so you can get it from here you need to have an account i already have an account so this is my account i'm logging in if you don't have an account you just register for one and then you can just directly go and download the genestream so which version you need so any version i highly require you that you download the latest version so in case you are taking this course maybe later so in the future you take a discussion on the time that i have recorded this course please get the latest version from the gns3 all they work without any problem so i'm going to download it so i'll just click on download and i'm going to use windows of course you can use the gns3 on mac or linux there is a way also to download it and install it there but i'm only using now a windows computer and all this code will be based on windows computer so i will say here download and i wait for this to be downloaded and once it is finished then we need to install it part number two is done point number three download the latest oracle virtual box suffer from virtualbox.org website so again let's go to the website over here to the browser and you can see that is still downloading now so i'll wait for this to finish that's not a problem then you have to go to virtualbox.org also again if you are watching this video later then in case there is a newer version then this version that's okay you can just download the latest version but for now on the time that i'm recording this video it is on virtualbox 6.1 so just i click on download here you don't need to have an account just download and here i will go to windows hash i click on it and then the download will start so now i have downloaded gns3 and i'm downloading now virtualbox part number three is done point number four download the latest microtex hr so what is the microtext hr microtext hr is the cloudhost router and that's a software that microtech provided to us where you can have the router s on a virtual environment all right so whether you want to install it on the cloud or you want to you install it on gns3 then you can do that so that is a software that microtech provided to us so let's go directly to the website and to check that so you can go to the microtic here and from here you can go to software so this is microtech.com and from here you go to software now on software you can look down and you can see this is the router os we don't have to look at the router s we have to go to the cloud hosted router so you can see this is the cloud hosted router and i'm going to use the version 7 all right at this moment version 7 is still on the beta version so on development but that's fine i mean in case again you are taking the course where the version 7 is a stable version then please get the stable version so it should show here over here on version 7 stable all right now before i download the the file for chr and uh before i tell you which one to download i just want to show you over here about the search r so this is the link i'm going to leave it for you it is from a wiki website on the microtic now if you go down you can see that this is what they are saying in the system requirement so it should have cpu 64-bit so again as i said your computer should have a 64-bit processor and this is the ram they say 128 megabyte but yeah 128 i think it's too small so that's why i said 4 gigabyte because then if you have many routers then it works fast and without any issue and uh the hard disk they said here that you need the 128 megabyte disk space for this hr image so that's uh also what is the requirement and you can see that the chr has been tested on the following so you can see on the virtual box vmware and camus and so forth so gci works on all of those virtual software so now if you go down a little bit here you can see that the chr has four different license free p1 p3 and unlimited so the difference is uh once you for example get the free one which you are going to work on it because you don't have to pay for and use the dchr then it gives you speed on interface one megabit as maximum and you can see the prices for free but yeah one megabit it's more than enough for me to be able to make the configuration that i want on the microsoft let's say if we want to do in congregation for ospf or for i don't know mpls or for security or or we don't really care too much about the speed the only point that we may have problem with this image license which is the free is in case you want to work to do some labs for a quality of service for queuing then yes then you will end up having some issue but other than that that's not a problem so one megabit for me is more than enough and you have the p1 then it gives you one gigabit the speed per interface per interface and you can see the cost is 45 dollars so which is not too much p10p unlimited so you can see that this is the du4 versions that we have on the chr of course for us we are going to get the free one so now which one to get it so let's go to the microtic again website again we go to the cloud hosted router and over here you have a different type so you have some for the vmware some for the oracle virtual box you can also have for the road disk so for this course we are going to use the vdi image which works for the oracle virtualbox so i'm going to take that one and i will say here i want to download this one so it is now downloading and in a moment we should have it on the computer part number four is done point number five now we need to start installing the software so install the ns3 on your pc let's do that let's go to this let's put everything in one place so that is the oracle virtual box that i have downloaded so i put it over here and we have to take the chr image let's check if it has been downloaded so i take also this hr image i put it over there very good so everything is now ready and let's start doing the work so first we need to install the generator so you see that it's straightforward double click and then you say here next next and yeah name it genes3 that's fine so you leave everything default this is where it's going to be installed that's fine and you can see it's not very difficult so it's just a matter of saying next next next and then you have the ns3 installed on your computer let's wait for this to be installed completely now you can get this one for np cut i would say also i want to install it next so we installed everything i had an older version now it's installing the older version now getting the newer version and then next and now it's getting connected to the gns3 to get some updates so we wait for that you can see it's now installing wireshark so why shark comes also by default with the nsgyshak is to be able to capture traffic so once you have for example have two microtic router connect to each other and you want to capture the traffic what those routers are doing then you can just run directly while shark on this emulation so we have to still wait a little bit until everything is installed so it's going now fast installed the putty that's also a software that you may need to use so solar putty i don't really want it so i would say no i don't want that and then i will say next we'd like to get free your free license for solar wins you can but for me i don't need it so then this is gns3 is directly installed port number five is done now we need to install virtualbox so remember we need virtualbox ngns3 to make this emulation network so let's go to virtualbox doubly click on it and also virtualbox will take some minutes to be installed so again next next next so here it will create for you some network interfaces for the virtualbox to work so we make it also next the same here it may take several minutes so that's fine we have to wait for it until it is finished so now it is finished so i will not start now virtualbox and that's it so now visual box is installed you can see genetic virtualbox it's very straightforward how you can download and install them point number six is done point number seven now we need to add the microtech search image on the virtualbox so the virtualbox is the one which is going to run for me the cr image so how we can use the virtualbox with search engines let's open first the virtualbox so the software that i have already installed so this is the software that i have already installed it is over here now how can we make it work so this is now open all you need to do is to say here machine new and you make a new machine and then over here you can just give the name you want so i will say here router 1 micro tick v7 all right so just to know that is the router one and now the type we have to put here linux and we can put here other linux 64-bit very good now how much the memory we need to get so five to five megabyte that's fine now i will use here the existing virtual drive so i'll click on it over here and then let's move it like this we can see that i have already attached this one which is a version one so if you want i can just choose that but if you want know how to do that you can just go to add and uh from here you can go where is your search our image saved so you can see that this is the one that i have and then you can say open and then it will show up for you over here and then all you need to do is just to click on it and then you can say create so you can see that now directly this one router one micro tick version seven it is showing up on the virtual box part number seven is done point number eight put all interfaces for this share image on virtualbox tuner attach so this one is over here of course you can see that i have a lot of other things some from micro take some for juniper some for huawei so please ignore all those and look at this one which is rather microtech version 7. so now this one what you need to do is you have to go to settings so it's really like a real router so what you can do you can just say for example on the network the adapter so this is the interface that is going to be on the router so you can if you want to be knotted with the computer interface that's fine but i highly i require that i always put it here not attached so i don't want to attach anything on this adapter and same i do here same i'll do an adapter three same i do add on adapter force not attached is the best option to do and then i will say here okay port number eight is down point number nine run the micro tick image from virtual box and check if you are able to log in so let's first check if this is gonna work the chr image version seven so how to run it all you need to do is you can just right click and say start or you can just double click on it so once you double click then you have you should have the windows open so that's it here we go that is running now let's make it big stay on the same size but that's fine so it's starting the service and here we go you see router one login if i say now admin with no password which is the default yeah i am now running the micro tick and it is on version seven and uh yeah that is microwave router os is running now i want to show you how you can import what you have here you put it on gns3 because on gens3 you have a graphical uh interface so you can just put routers and connect them and so forth and later i have to show you how you can connect yourself your computer to those routers to be able to open winbox so we don't want to work only on the command line part number nine is done and with this point i have showed you what you need to download and install on your computer so remember we have to get the the gns3 software we need to get the uh oracle virtualbox and we need to get the chr image from a microtech website please always get the latest ones in case you are taking this course later so you don't have to take the same version that i'm using here you just get the latest version and you do the same steps and they work all together without any problem so this is what i wanted to show you in this first lab i hope that this lecture was informative for you and i'll see you on the upcoming lecture
Info
Channel: MAICT
Views: 10,723
Rating: undefined out of 5
Keywords: mikrotik en gns3, mikrotik image for gns3 download, mikrotik image for gns3, mikrotik gns3 appliance, add mikrotik to gns3, mikrotik ios image for gns3, mikrotik gns3 download, mikrotik on gns3, mikrotik gns3 winbox, gns3 mikrotik router, mikrotik on gns3 for labs emulation, mikrotik chr gns3, RouterOS version 7, Maher Haddad, My Network Training
Id: -0N8unW5ZC4
Channel Id: undefined
Length: 17min 0sec (1020 seconds)
Published: Fri Jun 18 2021
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.