DIY Candy Dispenser and Coca Cola vending Machine

all right it's open for business machine is on all ryan has to do is pull out the tab for mike ike and see if it works to ryan toy reveal [Music] today we're making a candy dispenser out horrible yeah excited so all we need to get started is cardboard got some yummy treat candy going on here got some skittos i've got some hot tamales have you ever tried this before don't use this without your parents that's right got some mike and i make a mix i've never tried this before it's my first time even seeing this candy got some yummy reese's pieces and we all have some m m's and you need a pair of scissors let's do it whoa let's go here you go so this portion the back side i don't need this so i'm going to cut [Music] daddy is gonna cut these side pieces one two three on this one okay all right let's start cutting it up no no no caesar's eating it yeah chomping chopping [Music] this piece okay now let's cut the half of this side panel not just extra i don't know well i wait i'm gonna eat some candy okay all right i have to draw the straight line first so i know where to cut [Music] this line is the way i need to cut chop chop [Music] all right now daddy's gonna put tape here and put tape there that's my two sides okay okay ryan you can tape that side for me okay so i'm going to take this oh thank you nice you guys next we're gonna take this cardboard and put this in the middle all right let's tip it hit this corner there you go nice good job you can make a small candy dispenser or you can make jars wow so there it is small version giant version so all you have to do extra whoa yeah super huge if you get a lot of candy you need to make a big one so what we did is we cut little rectangular pieces here depending on how many candy you want we cut five for five different kinds and we also glued square pieces in between that's all we did yeah because we got a lot of giant yummy candy and then we also added some fun colors here so you can pick any color you like and just glue it on all right so now we're gonna work with the giant one so the next thing we do is we cut out a long rectangular piece with a hole in there that's rectangular shape and in a shorter rectangular piece with a hole in there and then what we also did here is add glue if you can't see here to the big piece right there that way we use it as a stopper so for example you slide in and out so where do they go you guys want to show the kids where they go whoa it goes there you see the hole there ryan yeah so we cut out five of them so we got two in we got three ryan's gonna help with the fours thank you ryan there we go five candy now cut another rectangular piece and put it right here so the candy can evolve down and let's duct tape top and duct tape yeah so all you need is put tape here and then tape right there now we create a fun candy ramp going on got tape going on in there yeah i'm gonna be able to eat candy there it is so the end is gonna look like this will be taped there and we tape there we're done there it is we have all five it doesn't look good right now but we're gonna cover it up so it doesn't matter you see how the hot glue stops it see let's see it's falling [Music] [Applause] fallen off so what do we need ryan another stopper so all you need to make is another rectangular piece like so put it right here and the candy will stop okay so i will let ryan do the honor and see if it works oh stop yeah see there it is so we're gonna get all five rectangular peas and put it right here here here and then here okay there and then mommy's gonna help on the other side and tape there now we got a candy stopper secure we ran out of tape yeah so we ran out of tape so we decided to use yellow one now he so if you noticed here when we put in the stopper we had to switch it out with some yellow tapes because we have no more orange but it's okay because all this will be blocked and it'll still look nice now you have to cut out two rectangular big pieces and you need to put one on the side nice we're almost done i'm super excited we're gonna take from the inside here that way we don't show the tape on the outside see so there it is tape on the inside put it now you can use hot glue if you want but we don't want to use hot glue we just want to use tape because we don't want you guys to do that yeah we're just going to just take the safer route and just use tape on the inside looking good okay so you take the top part like this [Music] so you can open bigger and close open and closed are you open to put some candies in here and you can close it yeah next you just print the label out from the in-home name yes all you do now is cut out the label and paste it where we want it super easy oh my god first [Music] now you're just gonna put the tape on the back of the label yeah it's on the back of the label here there's tape and then you just put it where you want so ryan wants some skittles there his skills are gonna be there okay so yeah we're gonna put it close to the bottom there reese's pieces next to it or you can put it up there like ryan what do you think it's different there we go assistant yeah hot tamales mike and ike and m m's nice woo-hoo now we know where the candy's coming from you want some candy you just pull versus skittles it is skittles next is reese's pieces pieces next is it's okay it's easy it's easy fix no daddy wait it's an easy fix all we have to do is change the label oh yeah yeah so if you mess up oh it's super easy you just change the label and there it is see here let's put my guy here let's put it hold on have you guys ever had this candy before i've never seen this candy mike i it looks like a like a vitamin pill it looks like a hot tamale except these different colors [Music] [Applause] you guys can buy obviously a lot more candy and food to the top now let's close the lid all right it's open for business candy machine is on okay so now we each get a cup and fill it up with our favorite candy treats oh nice ryan mommy too yay my favorite one skittles you don't you don't take it out from that right [Laughter] so you put it below wherever you want it so where do you what candy do you want uh i want my guy okay mike ike so all ryan has to do is pull out the tab for mike ike and see if it works there you go ryan it works and if you think you got too much it's super easy you just open the lid and put some back [Applause] sorry wow that is so awesome how is it now yeah oh i want to try okay so mommy wants some reese's pieces okay thank you probably got a little bit too much let me put some back here got too much enough next i want some hot tamales [Music] oh that's enough nice yay what do you want daddy and then yes that's good enough no yay all right so now we got a lot of candy but don't eat so much candy that's not good for you right so i'm gonna put a lot of them back and then we'll eat a few i'm gonna eat all of this no he's not he's gonna eat just a tiny bit let us know if you guys try it out and make your own candy dispenser and what candy did you use bye thank you for watching our do-it-yourself candy no spencer it's working welcome to ryan toy review [Music] today we're gonna make a soda machine that's right i'm gonna make a soda machine today with sprite coke and circus yeah but you guys can use any type of soda and if you don't even like soda you can make one for ryan if you don't if you don't like soda you can even make one for just water yeah so you basically just start with the cardboard piece we actually have four cardboard piece that we just glued together here to make it look like half a box right yeah next after you get the square box you need to make a rectangular piece like this and then we super glue a little small piece on one side another small piece in the other and all we have to do is glue back here yes we need two pieces to glue there and then another one to glue right to there so it's gonna like this you see ryan yeah so this experiment needs to be done by an adult right no kids that's right we got one piece now we need to put one right here yeah right here next cut out a rectangular piece and put it on the top yeah so this rectangular piece here if you noticed um we drew the shape out to look like a little knob there and this one actually goes on top like this but before you glue it on top what you have to do is get a scissor and then make a little hole like that cut cut yeah there you go but we actually pre-cut ours so it's easy so yeah so you just punch it out oh whoa looks like a stop sign yeah yeah so next we actually glue that on top like so and the reason why we do that do you know why we do that ryan oh yeah yeah you could put that right like that soda through like that but you have to take the cap off that's true yeah and if you guys like water you can also use water instead right daddy which one do you like i want sprite go ahead and put some glue how is it looking so far ryan yeah yeah next cut out a piece that looks like this and glue it right over here nice next we need to make a piece like this and put it on top yeah so the piece that you need to glue together is just one rectangular piece and then two side squares that's right and just glue it on top like that right is it coming together does it look like a soda machine a little bit yeah yeah now look we got some super blue ones some glue yeah it goes on top now you need to cut a rectangular piece with three circles yeah so you need to get a scissor and then cut three circles but we actually pre-cut ours so ryan just have to go [Music] nice so where does that piece go yes yeah that's right we're not done yet but the idea is to put the soda through the hole next make a small rectangular piece and you have to cut the hole in the middle and it will become this yes there you go rectangular piece with the hole in the middle next then you have to cut around this piece so it doesn't go just like this the top part of the uh the bottle yes we're going to check that and then and then you pour the hot glue into it and fill it up and put the tube in yeah so all we did was just buy these little tube wires and we cut it and put it in to the bottle they're gonna unscrew the cap so it wants the hot glue to cool down you see you see it's all closed up except the tube part yeah so next what we're gonna do is put that small rectangular piece with the hole that we just made and then close the cap see nice so we have to twist it tight yeah that's right you're doing it good job next you're gonna make a cap with two holes inside yeah so you have to drill two holes inside another cap and then then you get the two strokes yeah so one straw is a filled straw right one straw is just a regular straw you put it in and then the other straw you actually cut it a little bit shorter yeah so put that through one hole and put the shorter straw through the other hole and this long straw goes into the tube so when you open this bowl the air goes in like that and the soda comes out from this straw like that right so we put the extra tube here because it needs to be a little bit longer so we just added one more length now you put these tubes into the power drinking you whoa we're just testing it out with an empty bottle first making sure it fits twisted looking good look okay yeah looks good all right now let's test it out with the real bubble let's open this this is a little bit tight so i'm going to open it for ryan first how about you put this one in here let's see how about i drink it don't drink it yet we gotta test it out first you have to drink it first good tighten it very tight super tight what happened coming out already now we're gonna put the soda in the machine although it's it's coming out no no no no no hopefully this works [Music] it's coming out still [Music] good can i drink something yeah so sometimes it's not perfect so it spills out wow it's moving but we're going to get this right once they even get a little bit out i think it's fine so we should have took a little bit soda out it was too much soda good thing we have three cups yeah take a million dollars it's working it looks like orange juice you see it's working ryan yeah [Music] we made two more ones for the sprite and one for the coat all right yeah let's put those in oh no this one's the straw is not long enough oh no i can tell it's not gonna work out i'm scared ah it looks like milk oh what's going on we're draining all of our soda before we even get to use it it stopped oh it's that yeah all right now let's try this coke it's gonna smell good it's gonna smell like i put the cup in there already yes good idea do you feel it whoa sorry do we do it oh it's going fast oh it's spilling it's going fast now it's time to test it out i hope it doesn't [Music] turn the knob and then it opens now it's time to enjoy our drink yes so ryan's gonna stick with water daddy's gonna drink the soda so there it is our first time making a do-it-yourself soda dispenser if you guys try it out let us know right make sure i put on the right spot that's good this thing too yay see so now you can open and close close opening all right so now we're going to put a lot in there fill it up gumball gumball oh wow we're gonna have to knock you down [Applause] okay i'll open now ready set go that looks awesome welcome to ryan toy review [Music] today we're gonna make a gumball machine but cardboard yeah we're gonna build it on our towel with just cardboard and cut out pieces just like that huh i think i can twist the other one so it won't be be this pretty awesome right yeah we'll try our best yeah so all you need is cut out the any cardboard size but this is the size that we use and you gotta cut out a smaller piece to put on the side that so we would be using hot glue so then an adult has to do it it's hot okay let's put the wine [Music] you have to just press and hold for the glue to dry for 50 minutes 15 minutes if i can hold it yeah i'm sure it's just for a couple of minutes all right now a all second make sure i put on the right spot there we go all right looking good i just have to keep it steady if i move and then gets messed up cut a long rip take your and put it like this so we can make a slide for the candy yeah so the gumball falls down here let's screw this thing too whoa that's so fast you're not messing up next we're going to glue it on right here let's test it out so we're just gonna add a couple more slime right so it looks pretty cool when it slides down yeah because you want to go zig zag take a second all right so next we're gonna cut out a small square piece and then glue it right after it [Music] down because we're going to make the dispenser part right here like an obstacle course yeah all right so here's what it looks like so far another rectangular piece and put it right here yeah so for so do you see what's happening the gumball's going to go from here and then it's from here to there it's going to fall it is we're gonna glue it on let's test it out now we have two slimes it's working a little bit yeah so let's add about two more slides in okay all right so there it is our third slide let's test it out again we still have only one i mean two of them [Music] it worked a little bit yeah this way it works yeah now we're gonna put this all right one last slide well it's gonna be hard like right here yeah there it is we're gonna glue it down for our last slide next cut out a piece like this and put it in here you glue it here like this [Music] make a little flag with a button on it and you need a rubber band and we're gonna mix this all together so now you just need a square piece with a little stick here like this and there's a little other piece here that we glued on like so so you use this piece to stop the gumbo from falling see it stopped and then once i open it it's because we don't have a cover yeah we're gonna need to make a cupboard so it's pretty much the exact same one the only difference we did with this one is we made a little cliff here and a stopper here right and then and then another piece on that side so if you want to complete it you just make three of these extra and then on top of that also put a little wooden piece here so you can put the rubber band on so daddy will show you you see let's say you're gonna twist a rubber band twist twin twist twist quick [Music] yay so now you can open and close open close so what are we missing ryan do you know uh mouse stopper [Music] cover cover that's right so here it is here's the cover i was about to say i was about to say stubborn dog try to work don't stop at the same time all right so now we're gonna put snowing glue on both sides that's blue super glue all right let's glue on the cover so now it's complete so now we're going to test it out [Music] [Applause] gonna work open fill it up again [Music] ready go thank you for watching our candy dispenser video so let us know which one you think is cool or the one where you buy or the one where you can make yourself this one is this one is but you made this though yeah but this was fun this was a fun family activity that we did together so i like the cardboard one okay so this one is the flesh bye thank you for watching your video join the right squad [Music] [Music] oh i'm so triggered where is it where did that controller come from hey i found a glitch come on i'm combo little dude i'm a hardcore gamer for real check out my youtube channel combo panda it's about to get real i gotta get back later ryan bye [Music] here we go combo crew it's showtime catch me on my new channel let's play hello neighbor roblox bendy and other hardcore games oh no i'm lagging gotta go later please click on one of these videos for ryan joy review more fun [Music] you

Channel: Ryan's World

Views: 34,710,957

Keywords: DIY Candy dispenser, candy dispenser, homemade candy dispenser, cardboard candy dispenser, how to make a candy dispenser, candy dispenser out of cardboard, DIY vending machine, how to make vending machine, homemade vending machine, diy candy machine, candy machine at home, homemade candy machine, coca colca vending machine, Ryan ToysReview, Ryan's Family Review, Ryantoysreview, Ryan's toy review, kids candy machine, kids gumball machine

Id: QmrTl26Xopc

Length: 32min 5sec (1925 seconds)

Published: Mon Jan 08 2018