CS2 How To Reposition Viewmodel

everyone this is a quick video to show you how you can change the position of your view model from this to this since we can't use left-handed position at the moment here are some things you can play with as other users currently do start off by opening your console and type in view model now you should see viewmodel fov which by default is set to 60 and you can go up to 68 or just type in 70. this will put your gun further away from you now if you want to further play with the position you can type in view model once again and you will see three options with X Y and Z with these you can further customize the location of the gun some users have asked how to center it and what you want to do is have your X position set to -2 which is by default set to 1 I believe this is it for this video I hope you see the command to switch hands back pretty soon but for now this is what we have thank you for watching

Channel: FRAGZONE

Views: 36,569

Keywords:

Id: MFrKmH3r3z4

Length: 0min 48sec (48 seconds)

Published: Thu Sep 07 2023