Complete Assembly and Boot Guide: Pironman 5 with NVMe SSD

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
[Music] hello this is sunfounder today I'll guide you through assembling the pyrin 5 all you need to do is follow the steps to assemble and test before assembly it is necessary to update the Raspberry Pi's boot loader and install the system on the nvmes SD first update the raspberry pie boot loader by writing the boot loader to a Micro SD card next visit the software page on the Raspberry Pi official website and download the Raspberry Pi imager once downloaded and installed launch the tool in the imager select Raspberry Pi 5 on the operating system tab scroll down and select M utility images select boot loader Pi five family and then ENT vme USB boot then choose the micro SD card you inserted earlier from the list click next and yes to start the writing process once the writing is complete safely remove the SD card insert the micro SD card into the Raspberry Pi to monitor the boot loader update process connect a display to your Raspberry Pi then power up your raspberry B Pi a green screen indicates a successful boot loader update now let's write the system to your NV mesd insert the NV mesd into the SSD [Music] adapter then connect the adapter to your computer [Music] open the Raspberry Pi imager choose Raspberry Pi 5 select the recommended OS and then choose your inserted and V me SD from the list it's wise to configure your username password Wi-Fi settings and local now also enable SSH to allow remote access after saving click the yes button to start writing [Music] once writing is complete remove the EnV mesd card let's continue assembling the pyroman 5 start by unboxing and laying out all the components inside here we have the structural parts the main board and various accessories to facilitate transport some parts are bundled together let's separate them first and name them plate 8 and plate B first on plate 8 secure to m2.5 by 8 standoffs with m2.5 by first screws next attach to m2.5 by six standoffs finally secure to m2.5 by five standoffs in [Music] place now insert the micr extender into the card slot on the back of the Raspberry Pi then connect the Raspberry Pi 5 to the USB HDMI adapter insert a 1220 battery into the USB HDMI adapter positive side plus facing up then plug in a four pin header and plug in a two- pin [Music] wire lift the brown clip of the connector insert the FPC cable and press down a few times to ensure a secure connection secure the connected boards to Plate B with 4 m2.5 standoffs and 2 m2.5 screws remove the thin nut from the power button thread its wires through the side hole then reattach the nut to secure it Place three thermal pads in their respective positions take out the toar cooler position it correctly and press down on the spring screws to secure it finally plug the fan cable into the fan connector on the Raspberry Pi 5 secure the power switch converter to the raspberry pi5 with m2.5 per screws you can now connect the power buttons wires take the nvme PIP out of the box and prepare your nvme SSD first screw the SSD stud into the nvme PIP insert the nvme SSD and then secure it with the SSD screw insert the FPC cable into the nvme PIP then secure it with M to dot five for screws and in our 2048 [Music] rivet take out the fan and dust filter from the box making sure the Fan's power cable is within the [Music] slot place the dust filter to the back of the fan then secure the fan inside plate be using for M3 5 screws install another fan using the same method take the acrylic plate e remove the protective [Music] paper secure acrylic plate eat on iO expander with 2390 rivet flip the io expander lift the brown [Music] tab insert the O FPC with the black tab up and press to secure plug the twen cables into the io expander red wire into the positive pin and black wire into the negative pin you can now plug the io expander into the 40 pin header on the Raspberry Pi 5 now Place plate 8 and plate B together ensuring all the Raspberry p interfaces come out through the holes peel off the protective film from the back of the OED screen and stick it [Music] on secure plate 8 and plate B together with M to dot five for screws [Music] [Music] remember to peel off the protective film from the LED screen peel the protective film from acrylic plate C and acrylic plate D and secure them to the sides of the pyman 5 with M to. 5 for screws if some holes are misaligned you can push the metal Parts by hand to align the [Music] holes insert the light pipe into the hole on play date finally stick the EVA foam pad to the bottom of the case to complete the Assembly of the pyroman 5 insert a type-c power source recommended 5 volts 5A to power the pyan 5 next we'll conf configure the software to ensure all modules function smoothly open our online tutorial at pan 5. RT fd.io and go to the four setting up your Raspberry Pi page if you don't have a display you can access the Raspberry Pi remotely for example with Windows search for Powershell in Windows search bar right click on Windows Powershell and select run as administrator enter ping for hos name to confirm the connection is St [Music] stable now you can log into the Raspberry Pi via SSH username at host name local or SSH username at IP address the first time you log in a security message will appear enter yes to continue enter the password you previously set note that the password characters won't be displayed on the screen now you are remotely logged in into the Raspberry Pi then navigate to the five set up pyroman 5 first edit the eom configuration file to prevent the LED screen and RGB fan from staying active after shut down set power off on halt equals 1 in the file and then press contrl plus XY and enter to save the change now copy these four commands to install the pyman 5 [Music] modular wait a while for the installation to complete after rebooting the Raspberry Pi you'll see Raspberry Pi related information on the OED display and the pyran 5 will light up blue the video is over thank you for watching you can subscribe us to get the latest or visit www.s sunfounder docomo
Info
Channel: SunFounder Maker Education
Views: 2,630
Rating: undefined out of 5
Keywords:
Id: tCKTgAeWIjc
Channel Id: undefined
Length: 10min 39sec (639 seconds)
Published: Thu Jun 13 2024
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.