Building the Dream Final Episode: How to Build a Shop

you can see here we've got radiant floor throughout this section this is more like the clients going to work on the machinery this is more storage so there's gonna be a radiant tube heater it's gonna be the main source of heat you can turn this on and if you don't put the tubing in before you pour concrete you never do it again so that was the thought behind this customer said even if he doesn't put a boiler in right away he'll have it here so if he wants to it'll be ready to go and here in the office this will be also radiant heat so this will be the only source of heat in this room however out here there'll be a radiant tube heater which is a really efficient way to heat a building they work really well getting poured so that's that is pretty exciting got a lot of guys around here I'm gonna go ahead and set my I'm gonna try to set my GoPro up they've already got a couple trucks unloaded got the first probably quarter percent 25% of the building floor poured but I'll go ahead and set my camera up hopefully we can capture a little bit of the rest of this you know these taxi guys get up early at Saturday morning a long week I slept in till 7:00 so I don't know so in order to get the concrete all the way in the back of that shed with all that radiant heating and they're gonna do this all in one for so 72 by 80 and one for they got a conveyor truck pretty cool they just run this out what is cool about this dream got a heart scene see how narrow and the depth of it up here in the front but as it goes he gets a lot deeper so that's a custom drain was designed and made for the space that way it's hard to got the slope pre-engineered into it pretty cool pretty cool the way they are able to do these buildings in one for to get these ride on machines and these are gonna finish the they've all got set up four different blades different finishes that way they got the ability to kind of one of them comes in and knocks it all flat the next one comes in and polishes it up and then the last one comes in and furnishes it that way they can just keep kind of just keep following each other around pretty cool we're gettin eight inch pour this is a six bag mix we're gonna go with I think it's a five inch slump and I don't know all you guys out there that are maybe concrete professionals or whatever I don't even know what all that means if I'm being honest like I understand the slump the way it works and it's going to be a sweet floor I know my customer is super pumped he's been waiting for this for years he just told me that at this point when we get the doors on he's got a shed with a roof doors concrete he doesn't even need heat he's been working outside his whole life doing maintenance on the gravel drive so I'm really excited for him he's gonna love this and I'm gonna love it I think it's gonna be an awesome finished building so we're gonna let them get the pour going I got that GoPro set up and we'll see how it turns out so we'll see you back here in a little bit you get everything poured you you we had messed up I messed up on these trimmed with an exact dimension which was 5 and 3/8 and because lumber is not exactly perfect even though the manufacturer Mills these post two five and three eighths the problem is we were noticing that if our post had any sort of a kick to it and it wasn't dead-on laser straight then we were having problems with our trim going over top of it so you can kind of see here this was one that we did before and we're going to take this off I just left it for the time being we couldn't get them to actually close here though is the new trim that I just bought so it's two pieces we slid one from the outside because no one's really ever gonna be seeing it from here people are gonna be looking at it from over here so the hope is you look at it from this side you're looking over the lap and we just start tucking them into our brackets we'll punch our holes back through and bolt it all together we've got some columns to do and I'll take off a couple gutter downspouts as well to get to them man Greg we always underestimate the longevity and time it takes to do these weird different detail stuff that we don't do everyday so how about that guy's color-matched garage doors 24 by 16s got the front apron all done just wrapped up wrapping all those columns down the lean to listen to that echo big empty building 72 by 80 you can see here this is what typically happens in 99% of our shops because honestly most farmers contractors whoever's putting up the building they don't necessarily know exactly what they're gonna do but they know they want power so surface mount with conduit they can add on let's say they want to do a bench they can just run the wiring right where they want it after the act add lights kind of just build the whole system out as they go we've got a door to put in here for the office nice 20 by 20 it's gonna really look nice when it starts getting used but these are Rainer garage doors Rainer is actually their corporate office their worldwide headquarters is what it says is right in Dixon Illinois which is just the town over from me and so these are their rainer used to be their tricor series these are now a three inch thick foamed in place it's called their TM 300 I do believe they have an r-value of about 25 so 25 r-value that is definitely one of the top rated doors out there and we got them as you can see color matched exactly to our burnished slate steel so man this building looks sharp we officially are probably going to end this maybe I will come back in a long time see how this thing got moved in to see how it's being you know held up for the customer and how it's working out but I hope you guys enjoyed the build series I know I really enjoyed this project not often do we do one like this and we'll see you guys on the next one make sure you guys hit that subscribe button so you don't miss out on the next build series so thanks

Channel: RR Buildings

Views: 2,322,387

Keywords: how to, build, building a garage, build a shop, concrete floor, how to pour a concrete floor, building, post frame, shop, mancave, finished build

Id: HfgQDkguidU

Length: 12min 54sec (774 seconds)

Published: Wed Nov 21 2018