So I'm driving around here on the forest
road. I noticed this big rock. It's really clogging up. I don't know why this wasn't removed. But. So I'm going to drill this rock
and just use explosives to get it. Get it off. Almost. Not sure if the mud helps but... we can put a rock over it I guess we can get rid of this rock to on the same time. So I think. All right, so this is 3 sticks That's How much is that? 720 grams. So 0.7kilos Each stick is 240 grams. So this goes here just goes in there and this is going here contact. So that rock is pretty much gone. There is a piece of it and On the other side So I never really finished digging this part from here to there. There's a road going there, so that part was never dug last summer, since there are so much rock here. So I kind of skipped that. There is a lot of water
going over the road now and yeah, I might as well save that caravan. So I don't know,
maybe the plan is to just dig a pipe to the other side here
instead of digging all the way there Maybe i can go and
just take out some mud there to lower the water, All right. So now the water is flowing in the ditch
instead of going over the road. So this is good for now. All right. So that will do. So this water is not going to flow to the right. So I need to. Yeah, I'm just going to dig a
pass through the ditch here. So, this
is the spot where I used the dynamite. Pretty much there. So this is where the road ends. The birch I've been doing firewood off in
previous video was taken from here. So the road is supposed to keep going,
but I don't know. I kind of feel that I want a bigger
excavator before continuing with that. Most of this road was actually built
with with this. And the skid steer. All right. So I was thinking about drilling
this horizontal like this. I never really done that
with this machine. So let's let's try that. I got a longer drill after this. I'm going to get that. I mean,
how long can this be? It's around, Yeah, well, over two meters, I will say. So I just fill it with dynamite to get it done. Yeah, it sure is. Something else. Drilling horizontal. Yeah. I got to get my a longer drill
and keep going. So this rod is pretty much new. This isn't. I mean, it's almost round on here, so I'm not sure how good the bit
is going to get stuck to this, but, I mean, Anyway, I seem to have some it seems to be some kind of dirt
inside of this. I tried banging it out. So before putting the bit in place,
I need to blow this out. Otherwise
The drill is just going to stall Yeah. So there's something stuck inside of this Nope. I'm having a feeling
the button bit is not going to come out with the rod. We'll see. All right, so it's. Yeah, it's almost half the stone Normally, when putting on those bits,
it's really hard getting them off. But, I mean, it's been used
quite a lot this rod, so I guess I could weld a new bottom bit there
so I still could use this. I'm not going to try and fish it out. I mean, I think it's going to come out
one way or another Way easier! I think drilling vertical is is the way to go We could manage to get that in. All right. So that is one and a half stick. Little more. So this is 3 holes and filled with,
yeah five sticks. That's 1.2 kilos. I don't know where I left my electrical
tape, but I guess this will work just fine! would be nice having an actual fire fuze or tar fuze when doing jobs like this in the woods. I mean, just ignite it on take off so it can be a real hassle
dealing with these wires in the forest. I mean, when the wire stops, you stop
and you seek cover. You're not really taking the extra time,
finding more wire and stuff like that. So I mean it would be safer. I think I'm going to see
if I can get some tar fuzes. I don't think that's impossible. But I mean, it's not many people using them anymore. I think that's good. This is fine. Yeah, that's. Sure made some spray. I mean, this is kind of brittle now. This will be some good munchies
for my stone crusher. Perfect. There be no problem getting this out
with the excavator. I mean, I guess
half of it is in the forest now.
