#905 Navy Blue And Gold Geode Resin Coasters Made In My Home Made Silicone Mold

[Music] is it what she bird sings little ones [Music] bird not for you hang on don't I'm black my fingers though a huge fake you wouldn't want to get them in there get your fingers in the way that's for sure yeah you go there you go what's your bird kookaburras want some more what is the rest of the birds tonight see there's a little red pie lock on the back on that chair over there I see if you'll come down P we we call them but magpie looked kind of like a small made fire I guess oh you found something good on you you want something - I'm gonna have no food left at this rate don't fight over it and when you're back again are you hang on that one was way too big it was bigger than your head oh look a baby make pie hello baby make pie where did you come from alright I can hear you hang on the videos coming up to four minutes already I can't be much longer there you go did you get it okay guys welcome back I'm gonna do a coaster for you today with my new mold that I've made very exciting and I'm gonna do navy blue I don't have a navy so I'm going to use this one here sapphire and I'm gonna add some black to it and see if I can get a nice dark blue I think we'll add a little bit of the pinata alcohol ink as well just because the ink with the mica with the plain resin make really nice little patterns before I get started I had a phone call from the people at Barnes you know I've been using the Barnes clarity and I thought oh maybe they're ringing to say thanks for promoting our product because they've sold out of the clarity australia-wide sold out so anyway I've gotten the phone and um no they weren't ringing to say thank you at all there's some quite rude woman give me a hard time basically abusing me for telling everyone that clarity was hit resistant now have a look at this here this is what I was reading this is the specs that comes with the clarity and here I mean I'm no scientist so I just read it from here heat distortion temperature 145 degrees now it doesn't that sort of make you think that it's heat resistant 245 degrees I did I figured that was the case but apparently not so I have been told in no uncertain terms that um it is not heat resistant so Barnes you know what you can do with your resin don't you I won't be using you again after that ruin phone call now I am using today haha stone Code countertops and this is the art coat okay up coat yes okay so that one's a really good one for coasters radio I have mixed up I've got 400 grams of mixed resin so the art coat is a one to one so equal parts which makes it really easily I am in the process of just researching what resins are heat resistant I haven't been speaking to a couple of companies yesterday very lovely companies and I'll be getting some of their products shortly so I'll be doing pause with that very soon so stay tuned right now let's have a look at this sapphire now I think what I'm going to do is when I take I take a big scoop like a hip it's only a little teaspoon but we'll do a heaped teaspoon of the blue like so and I'm not sure how much black I'm going to need but I think I'll just we can always add more so let's just put that much on the end of a stick because I don't know how strong it is okay and then we'll pour some now what I think I thought I'd do this last time but I didn't do it I'm gonna pour just a tiny little bit of resin in first and I'm gonna mix that to a paste you know how your mica powders fly all over the place when you mix them so I thought I'm gonna do this time is what I do when I'm making a gravy or a sauce you know just add a little bit of liquid first get a paste that way you don't get your lumps it's not a good idea okay so that's still quite blue let's add some more black I'm gonna have to use another stick another lob I'll just wipe it I can use it again you probably can't see in there it's a little bit dark hopefully that wasn't too much I guess that was probably maybe half a teaspoon so one teaspoon of the moon half a teaspoon of the black okay so that's mixed to a nice paste now so let's add and I'm going to go with half a cup so these little cups measure the four ounce cups which is a hundred and twenty Mills so that's half a cup there of resin still looking a little bit black because I really want a nice dark navy I don't have a navy now I really wanted to do a red one as well and I don't have a dark red market powder there either like a pinky red for an orange II red so I'm gonna do with that that looks pretty good I'm gonna I am going to add another little bit of black I just want it like I want it almost black but just a tinge of blue shining through so that should be enough now I've got my micro sitting on top which is not what you want okay I'm learning how to make navy yelder stir it gently and then I'm going to put in a few drops of the alcohol ink just because the as I said the alcohol ink and the mica powder together they give you these beautiful sort of striated stripy kind of patterns you know from the outside in which is really nice but you do have to have enough mica powder I noticed when I started doing these resin pause I wasn't adding enough and it was kind of just sort of floating over the top I wasn't getting that really beautiful striated sort of pattern that I want to let me show you this Navy looking good Hey look at that what do you think of that still got a blue tinge to it but look at the side of the cup there it's quite dark so hopefully here we go we focused again hopefully that will be a nice color we would like it a little bit darker but for now it will do and I'm gonna add the pinata alcohol ink that's the sapphire liquid shake and I'm gonna do hmm I'm gonna get to because again I don't want it to go too blue again doesn't make it go to blue I just want it for the reaction I don't really want it for the color oh I could have put the black in hang on I'm gonna put black ink in there as well counteract the yum that's just the what is it mental a black black alright let's put a couple we didn't need to use the blue actually I probably just needed to do the black so now we've got two drops of black two drops of blue and we've got the teaspoon of sapphire market powder 1/2 a teaspoon of black mica powder and hopefully that would look really pretty alright so sorry about that that took a while didn't it took longer than I thought that's for my clear and then this one I'm gonna have another go at this this is um spike our tree creations and it's the rich gold it's actually a metal powder like real pieces of metal that's not a mica so you gonna just I think we made quite a decent amount I'm going to just put what's on the end of the stick there and it's only gonna be for like centers so I don't need a lot so I'll just put a little bit of resin in you can go in there cuz you're gonna be for the whoops too full you no need for the clear and then just a little bit for the gold look at that it's like a liquid metal liquid gold and because it's a metal powder I've been told it kind of floats to the top rather than sinks so hopefully when I put my little bit in the middle afterwards hopefully it will kind of stay on top that's what I'm I'm hoping for anyway I [Music] have cleaned them already I have to clean my molds I got the masking tape out and run it across and stuck them all down and got heaps of little hairs and bits of fluff and stuff up that some yeah it's just in the areas and it floats around okay so you two can just sit there for a minute black hard to know but you know if you've never made up a navy before bear with me while I stir this I know it's taking a long time to get ready isn't it sorry this wasn't sure how much black to put in see when I'm doing my acrylic pouring and I do want to make a navy paint I use like 99.9% of phthalo blue and then I have a tiny little bit of black and it makes my navy but this is totally different obviously might even be half half 50% blue 50% black might be the way to go I put another two drops of black in I really want a nice dark blue almost black almost black and this is going to be for my edges mmm so my coaster bulbs that I made I made up some new blanks resin blanks sanded them and I poured this it's a smaller it's much thicker a smaller one this time okay I'm think I'm happy with that better be taking up all your time all right here we go now I'm going to just go around the edges and put a little bit on first just to make sure I've got enough to go around everybody and then I can add a little bit more if there's any left so I may not fill these molds up all the way only because it only made 400 grams for six coasters and I don't mind if they're not filled up all the way I may do a topcoat afterwards or a may just have slightly thinner coasters I've decided I don't really like the really thick chunky ones I don't really like them more than say six millimeters thick which i think is more than enough I think they just look a little bit more delicate pretty when they're not so thick and chunky I think the last mold I made they were about eight millimeters thick it seemed a little bit clunky for me so this one was a little bit thinner the mold making process didn't go to plan I I must say so I don't know if I'm going to show you the video but I'm gonna I'll do another one because I've learned a lot from doing this one this mold but yeah I'll do another video and that's pretty much pretty much used it all up there but a little bit more in those edges there I think they're all very similar and then I'm gonna pour the clear in and that will kind of push over the Navy and then when all comes back in again let's when we get those gorgeous little Strappies it's gonna pour some of this resin out because it's too hard to pour a full cup and I only want to get it in the middle all right here we go pull that into the center I've got a little area there that I've I'm gonna color in I figured it would sort of spread on its own but it's not really I'll just make sure that they're all pushed in there we go let's go push it all into those little corners little edges make sure it's all in there so that we get the same sort of pretty effect happening on all sides if it's all pushed in now we going on here I'll push then not quite because it's a homemade mold it's kind of got the rock look edges so they're not straight up and down which is really nice so they're a bit sort of wonky there we go pull that in so it's just covering the top now let me clean my mess up here I've made got my little baby white handy on it dirty my brand-new mold the first time I'm using it okay now so more clear you can see how that one's almost coming to the middle there hope I haven't put too much of the blue in whether or not I'll have a slightly transparent Center I'm hoping to but whether or not I get that is another question so important with that half a cup in here just basically letting that clear spread and touch the edges there it's a bad back up and then we can watch and see what happens watch it all flow back in okay now I might put a little bit more clear in just to kind of fill them up a little bit more I'll use up a bit more of the resin I don't want to waste it pour that straight into the middle and if your cups too full it's really hard to pour into the middle thanks it's kind of runs down the side of the cup alright now you could do with a little bit more I'm just going to fill these up with the resin I've got so I don't waste it see last time I used my six mold or six coaster mold I think I add I made up four hundred and eighty grams and then I still put a um a clear coat over the top so they can hold quite a lot but I just don't want to fill these too much okay kind of make them all even and then what I'm going to do is I think I'm going to wait for a little while for the reason to kind of set up a bit and for it to stop flowing into the center and then I'm gonna put my gold in that's pretty good actually I mean just using it all up put a little bit more in there just in case I run out I don't to run out of gold you never know it might sink or something and then you know I haven't got enough so let's just pour some more resin in that's about a third of a cup I'm gonna have to add more gold now though alright let's have a look see which one needs a little bit more okay Oh bring you bring it in a little bit and we'll put you on pause and we'll come back and I'll give it maybe 10-15 minutes and we'll see how it looks it looks so dark through my screen when I say in front of it looked quite light oh I haven't torched hang on let me torch and then I'll put you on hold on pause I should say it looks much bluer from this side here and there's already something in there you gotta be quick don't you gonna do it cover them so nothing gets in there don't think I'm gonna add any more clear because I'm starting to get those middle you know what they called someone knows what they're called let me know those effects I call them striations from there so I'm not gonna put any more clear in that because it might disrupt those little striations all right put your paws and I'll sleep back here real soon all right oh I think it's been about 15 minutes and I tell you I am a bit hesitant to be putting any gold on them because I just love what they're doing I'm actually getting dendrites in there I'll take you down later for a close-up but look actually you probably won't go to see it because I'm covered up with gold but we've still got it clear center you can see the white through that's the mold underneath but look I wanted to try this so let's let's do it I've got my gold it'll probably ruin it but Oh anyway I could always do another one with just Navy can't I just put a little bit in the middle he won't put too much in to begin with and I've got to be really careful I don't drip it on to the side anyway a little bit on I can always add more later and I'm a torch this and then what will happen is it will kind of spread across the top it'll sit on the surface I'll get this little shimmery gold surface which is really pretty you can't look amazing such a tiny little bit I've got my my pyramid coaster ready to go to fill up was left over so it'll have a gold tip it's gonna make these all about the same so as you can see this gold is basically falling through because it's mixed with resin you can actually just like dust the UM the gold onto the surface and then torch it so that's another option but that'll be for another day so let's just see what happens with this now we have a little bit of a torch okay so it's he's kind of sunk a little bit too much I think oh dear looks like a bit of a blob of dog poop sitting in the middle oh now what do we do okay I think I probably need a bit more do that and then torch it straightaway it's okay if it smokes it just does that actually you know what let's not do any more if I can get that gold out oh we can't probably can't get it out now no look I'll just leave it put it down to an experience I'll put the gold there so know what I'm gonna do is and I'll show you the difference I'm just going to take a little bit on the end of my stick I like that I'm just going to tap that look at that isn't that beautiful and just just tap it lightly above and basically it's just going to stay on top and you need a tiny little bit it's kind of flying away got a little few little bits that have kind of flown around but that's okay said that was a tiny tiny little bit but doesn't that look elegant just a tiny little bit now just give you a tiny bit more and then what I do is just torch it and it'll just basically melt it I'm just trying to cover up my gold blob underneath and give it a little bit of a kind of a spreading kind of a look I guess just a so it's sort of a more thick in the middle and then kind of just spread out a little bit now look now I'm getting too carried away this is more jewelry less is more isn't that right okay trying to make them even you'll see what happens anyway once once I torch it kind of melts I said I want to leave it like that because if you left it like that you would be able to feel that raised edge over the top now just a little bit of heat start from up high you just want to just melt that so not too close but you can see now it's staying on top which is really pretty if you just want a little bit of gold just sitting on top you know what I do need to do is I need to make sure that I've dissolved all the powder otherwise you'll be able to you know feel it on the top it'll be raised so I'm just heating it a little bit more making sure that I've dissolved all that and there we go probably put a little bit much on I'm a bit upset now that I've got that big blob of gold underneath but hey maybe we won't notice that this will be the top for sure all right I'm going to take you down for close-up and you can see what you think it's still going to have that tiny little bit of a translucent Center yes yeah I can see the white there through and around that gold if you wanted to if you've got a big blob of God like that and you wanted to break it up a little bit you could just torch it like that and it well please come back in but you can just torch it and see how it don't worry about the smoke it's okay does that but it kind of breaks it up a little bit if you don't want a big clump but yeah that's fine it's fine all right I'll take you down for close-up if you look very black from up here that's visual it's Betty I'll have a little look hopefully you can pick up the fact that they're blue let's turn the ring light off maybe by turning that ring light off you might be able to see that they're actually navy blue okay but what do you think of that gold on top it's pretty isn't it I I do like that and as I said it just sort of floats on top so you don't get that big come on focus what's your problem why won't you focus it doesn't know what to look at are you looking at the white blob it's looking at the white light all right and my colors going all weird but yeah we'll definitely have that translucent Center it just doesn't know what to focus on it's having trouble poor little thing now this one the one that I had them more there's my finger in the way more of the blue around the outside trying to show the effect it's really hard to pick it up though I have to wait till it's dried but um have a look over there over the top beautiful and shiny see that little bit of gold floating on top what do you think do you like that I should have just done that to begin with rather than mix it with the resin but yeah it's I'll put it in the top of my pyramid before it goes off so that that'll be the first layer of my my pyramid mold yeah I can't we do it one-handed oh I'll come back tomorrow we'll show you the the unmolding and then we're gonna paint the edges of these babies with some gold so we'll see you then [Music] good morning everyone it's the next day chilly winters morning I'm very keen to get these babies out well I think I'll do a flood coat just a little top coat just because I can I can see a little lip there and they're probably not very deep because I didn't feel the coasters up let's see how they come out of my new coaster bold oh it's out have a little look you know hopefully you can pick up the fact that it's blue do we have some trends lucency in the center oh yes I can see my hand through that me change my magnification there okay so you can see that it's navy and you can see that little bit of transparency through there so look at that that's really pretty now that's the little lip I was telling you about that a little bit there so I'll just give it a flood coat and that'll basically just bring it up to the top but what do you think of my gold sitting on top do you like that it's pretty hey alright shall we have a look at the back see what's happened oh yeah not much see the gold blob that's what happens when you put gold and you just get this big blob and it all sunk to the bottom now I did probably put a little bit too much mica in so it's it's quite heavy it's all sunk as well but this will be the top for short right let's get all the others out I'll try me a little bit quicker and I've got my glove on so that I'm not putting fingerprints so this one's much more transparent I just wish I didn't have that blob sitting in the middle because then you get a much prettier look wouldn't you look at the dendrites I've got on this one it's kind of like feathering have to excuse my overhead light there I do need light in my studio it's a bit dark I only got one little natural light window look at that isn't that weird that's so pretty again I just wish I didn't have that big blob sitting there like that definitely will try these colors again and just do the sprinkle on top without the blob so really pretty like that one no look they come out so easily beautiful oh this has got that little v-shape that was that one way the um I don't think I put enough of the Navy mica in the ones that were towards the end the first one I did had a lot and then when I went through I didn't have quite enough so it's a little bit thin on the edges but you can it's got more of the transparency there and look at my dendrites it's what they called I don't know really a pretty little effect that's for the alcohol ink does that I think and there's some on goal just sitting on top actually you can see can feel it off a little bit you can see it's kind of a little bit raised that that tiny little bit of gold so when I do my flood coat that'll just fix all that and then there's anything that I need to stand older sand because they're not very thick very thick these coasters love it love it love it definitely gonna do these again and I'm gonna make up a little bit more of the Navy I shall not write in black next time again there we've got a beautiful clear Center but how much prettier would that have looked if it didn't have the big blob in the way much better look much better yeah how does stuck now that I can show you that it's Navy can you pick up the fact that it's Navy yeah sort of so I'm gonna do the flood coach talk about a video it's a mock video now this one's really pretty looks like her you know how you're lying in the forest maybe you're lying in the forest on the ground and it's getting dark and you're looking up through the all the trees to the moon and you're just looking up through all the branches to a little bit of clear area through all the treetops and looking up at the moon that's what I see I know you don't have to see things in your paws but that's what I see reminds me of forest I do kind of look like trees don't they so again really pretty and just a blob on the back last one and this one's a bit of a weird shape too I must have run out of navy lava Sparkle do you like my sparkle on top look how pretty it is and again you've got that clear center so the first one that I did I put more blue mica on it so it's darker hasn't got quite as much of a clear center and then these ones where I didn't have very much blue I've got a much more a larger clear center what do you think do you prefer these ones over the other ones I don't know if it wasn't such luck if it wasn't a weird shape I would like it more I don't know they're all individual aren't they all right so um I'll get set up to do the flood coat and we'll do that and then we'll paint the edges gold so I'll see you in a minute don't go anyway but Oh guys I'm setup for my blood coat I've kept the coasters covered just so that don't get any dust on them and this is a draw so it's a little bit higher over here and then it sort of drops down a little bit so for me to get good coverage over the top of these because they're sitting on their little cups I just had to put this end a little bit higher so I'll put that back later when I'm ready to cover them again don't let me forget will you right now I've mixed up my resin I've got it sitting in some warm water because it's a bit thick so they show no really cold morning it's quite thick so I've mixed it for 5 minutes take it out of the water to dry the bottom so they don't get me drips anyway of water and I thought what I'm going to do is I'm going to use my little spatula palette knife thingy just to smooth it to the edges and because it's like you know it's it's lower down it's just easier than using a popsicle stick so I'm going to smooth it and then just take it to the very edges like that so just six on that little raised rim and hopefully that will work now I've mixed up 100 grams I figured I probably need about 20 grams on each if I'm quite only left over I'll add it to my pyramid mold which I've just got some gold singing in there at the moment because that was the gold but I had leftover from these blobs which didn't work but anyway right I should actually just make sure that these are clean just make sure that they are clean dust free because anything that's on the surface will get trapped underneath my flood coat so we'll just give them a bit of a wipe with a nice clean dry cloth and it should be like a jelly and off we go here we go now I'm just gonna pour a puddle into each and because I've warmed up my silicone it does spread better I'll just put a puddle on each and I can make sure that I've got enough oh there's a hair get off get off my coaster we'll just make sure I've got enough to go around there's a head go away ah same one that's a bit of luck really I've got my hair up always up my hair up can you imagine if you've got long hair and Pytel and you bend over and you get your ponytail in the resin oh my gosh wouldn't that be awful has anyone done that I don't think you could give it the resin off could you you'd have to cut your hair I'm actually gonna just use all of this and I'm not gonna scrape I'm not gonna scrape it out I'm just going to pour what I can and not scrape the cup and this will tell me my tables level with two alright so there we go now it's hope I haven't got too much here you guys you just spread that and hopefully that little lip will just catch the resin and stop it from blowing over and it may even have a little a slight mound which is fine I just don't want it to you know flow over and go down the sides and make a big mess so just push it to the edges like that I'm gonna push you over real quick because you look as if you might overflow I actually might have a little bit too much in you you know I probably shouldn't have poured it all in whoops whoops whoops whoops shouldn't have poured it all in I thought I only was going to need about 20 grams on each take off before we have an accident that runs down the edge so again less is more you can always add more we're not a good idea to start with too much I got a little bit left in there now into my cup if I need it but resin is self-leveling so now I have to be really careful here not to touch the other coasters and just push that up to the edge oops don't want it to go over because if it goes over and then under then you get drips on the other side and you know you don't want that so just have it sitting on the very very edge doming a little bit you'll find that the resin usually does dome and it'll just sit there quite nicely and happily as long as you don't put too much on it just spread it out to that little lip and then you may not even have to sand we'll see what happened this once they're dry but I might not have to send or if I do it'll only be a tiny little bit and then once I've done this I can get down low and look across the top into the light and see if I've missed any little areas because it'll show with a little dip a little sort of bare hole huh and you'll be able to see that you've missed a little section and then you can just go on and fill it so this is very very easy just wiping it across with my palette knife and it's just touching that little lip there so it's very easy to do pretty quick much easier than using the popsicle stick get around here I guess I could have sped this up hey but by the time it takes me to go around there and pause it and then do this go back and pause here and have it done it doesn't take very long as you can see and then I'll give it a torch so it's flowing nicely because I did warm that resin up a bit in the warm bath and doesn't look as if I've got any sort of flowing over the edges so that's great I didn't want it going down the sides and then as I said it gets on the bottom and then you have these resin drips and then you want to stand them and it's just it's just difficult okay I think that's it now the only problem is if you torch too much you're going to really heat your resin up and then it'll start blowing and if my flow flow over the edge so be extra careful when you're heating I'm just cleaning this off before it dries so that I can use it again I'll keep that with my resin tools and that can be my resin little spatula thing and when I clean up my stickers well you shouldn't do it over there but you know how timbre releases air bubbles when you put it equal it does when you put in a resume printing water so clean that off and it's got resin on it and then I can I can use that again for stirring without getting any bubbles coming out of my timber because raw timber does release bubbles alright let's torch and I don't have to worry about torching too close really because I don't have a silicon mold to worry about burning or melting just watch them and then I'll get down low low low look across the top see if I've missed anything see if there's any hairs cloth or anything in it and then I'm gonna have to wait again that's any problem isn't it I was really hoping to paint the edges on these today but we're gonna have to wait now until they're drying and then I can do my edges and I'm gonna do them in the gold I've got this gorgeous montmartre gold now each gold is a little bit different sort of a shade some golds are more of a pinky gold and then some like a darker gold and this one's a really bright go so you can use either the I think I'll use the montmartre gold because it's a really bright gold so I still see that there's some bubbles popping just don't wanna you know make it too hot then it runs over the edges but I like a bring it down for a close-up and then I'll give that another torch in a minute so this is actually got a tiny little bit left much can you see that they're not just clean my stick oh my gosh look I don't want to waste any of it so I'm just gonna pull a little bit of clear you know on top of my gold so now if you don't want to waste any resin it's a great idea grabbing yourselves one of these little well that's actually a big one this is the big pyramid mold it doesn't have to be a pyramid it can be a square sphere whatever whatever you like the look of really clean that again just to use up your your left over bits of resin they were gonna clean stick again let me torch this one gotta be really careful with this one with the torching it got stuck alright so that's it there a little bit of clear in there not very much but it's at the point there so I don't need a what is a very pointy end alright let's go and I'll help show you let's get down really low or if I can get down really low getting old put you on focus when I focus all right now look across the top see how oh there's a tiny little lip there but most of them are doming nicely and I shouldn't really have very much to stand at all tiny little bit of lip on that left front one but yeah looking really really pretty and nothing's dripping down the side which is a bonus all right I'll bring you back when these are dry and I'll show you how I paint the edges all right stay tuned hey guys so my flood coat has dried I've gone ahead and edged or gilded those five coasters with my gold I used this one here the montmartre gold it's a lovely shade I have attempted match whatever I've got on the top to the side cuz there's a few different goals and they're all different colors now the best thing to do with these I found is after you've given them a really good shake you'll have some paint in the lid there and that is really good for just dipping your nib in it gives you just enough paint to do edges because I find if you're you know you're dipping into into the pot there sometimes I get like pint all the way up to here because you just don't know how far didn't to up to dip it anyway wouldn't sort of guys but empty can drop a little bit in there but that's what I'm using so this is just a used pen it was my 18k Kryolan gold pen but it's empty now so I just like to use the nib now the other thing I'm doing is because I've got a slight little lip on a few of these oops all I'm doing is I'm not gonna do it here because I don't want dust all over but I'm just gonna use my emery board and really gently I'm just going to like rub the edges like that okay so I'm just gonna go do that away from these so they don't get dusty and I'll be right back alright there we go and just ah sound it you can see there I needed to do a tiny little bit but you can see it's kind of gone white so yeah nice and smooth now and the best way is just to feel with your thumb or your finger as to if there's a little lip there or not and then you just give them a little dusting with a a clean dry cloth and I've got my little upside-down Cup sitting here to put the coasters on I'll put that there just over there you should they will see that hey move things over a little bit alright so you've seen me do this before just dip hold your coaster like that and paint away and because they've got that rock edge and look really really natural because they're homemade so they haven't got those smooth edges they go in and they go out then it looks I think it looks really nice when they like that natural look because you're trying to replicate agar too aren't you that agate slices so you want the edges well I think it's nice to have the edges a little bit rocky like that but I've got moulds that don't have that so you know you use both here's what you can what you've got and having trouble with my focus because it wants to focus on the things behind as well so I look I won't continue with the whole edge I've done half so now turn your coaster over and again just use your little nib there to do your edges your top edges oh my gosh just a very thin line I don't like it too thick if I stay down here it might be easier dude follows the little line really easily just on your edge I just think it looks more elegant if you just have a very fine line of gold but totally up to you now thick or thin you want to do it you'll find it yeah if you've got a rocky kind of an edge like this anyway you might have some areas that are a little bit thicker and then some that are thinner just depending on what your coaster is doing so there we go very pretty home well I'll go and get set up and put these babies out to show you the finished product it's Papa Bear to dry

Channel: Pouring Your Heart Out

Views: 55,989

Rating: 4.9044204 out of 5

Keywords: #stonecoatcountertopsresin, #geoderesincoasters, #homemadesiliconemold, #blueandgoldresincoasters, #navyandgoldresincoasters, #metalgoldinresin

Id: lp_lqvxFVB0

Length: 56min 36sec (3396 seconds)

Published: Mon Jul 20 2020