6.5.1.3 Packet Tracer Skills Integration Challenge

hi friends welcome to all in this video we are going to see the packet race or our activity skills integration challenge here we can see our tossing table and this addressing table is incomplete to be how to fill this at default a gateway of these devices we will go through the objectives of this packet restore activity finish the network documentation right we have to complete this default gateway perform basic device configurations on a router and a switch verify connectivity and troubleshoot any issues we will go through the scenario here your network manager is impressed with your performance in your job as a LAN technician she would like you to now demonstrate your ability to configure your router connecting to Land's your tasks include configuring basic settings on a router and a switch using the Cisco IOS you will then verify your configurations as well as configurations on existing devices by testing in t2 interconnectivity they given a note here after completing this activity you can choose to click the reset activity button to generate a new set of requirements variable aspects include device names IP addressing schemes and the topology so here we got one topology and addressing schemes so according to these requirements we are going to complete this packet restore activity also we will go through the requirements provide the missing information in the accessing table name the router floor 14 and the second switch room - 1 4 6 you will not be able to access a room 1 4 5 right use Cisco as the user or exit password for all lines use class as the privilege to exit password encrypt all plaintext passwords configure an appropriate banner configure a trussing for all devices according to the addressing table document interfaces with the descriptions in during the room - one for six-wheel and one interface then save your configurations verify connectivity between all devices all devices should be able to ping any other device troubleshoot and document any issues so we will do this one by one now first of all we will get the missing information from this addressing table here we can see default gateway for these devices here we can see room - 1 4 5 when Rome - 1 4 6 these two devices are switches and here we can see 4 NT devices that is manager air or reception a manager B and reception B so we are going to get the default gateway for these 6 devices right it's quite easy to find the default gateway here we can see 3 devices room 1 4 5 manager a and reception a obviously these devices are connected to the router through this interface here we can see that name is Gigabit Ethernet 0/0 so obviously that default gateway for these devices will be the IP address of this interface Gigabit Ethernet 0 / 0 here we can see that atrás the router name is a floor 14 here we can see that two gigabit ethernet 0/0 it's a truss is 128 or 2 1 or 7 dot 20.1 and coming to these devices that is a room - 1 4 6 manager B and a reception B here we can see these network is connected to the interface of floor 14 here we can see that interface its Gigabit Ethernet let me see that yes Gigabit Ethernet 0 / 1 so obviously the default gateway for these devices will be the IP address of this interface a Gigabit Ethernet 0 / 1 on floor 14 router here we can see the IP address of this interface yes here we can see that 128 or - 1 not 7.30 dot 1 first of all we will name the basis and we can rename or ladies the floor 14 and the room - 1 4 6 your they clearly mentioned you will not be able to access a room - 1 4 5 so we will check that coming to room 1 4 5 here we are getting the message configure is locked right so we will configure this router and this switch coming to the router floor 14 enable configure terminal we are going to set the hostname as a floor 14 well now we will come to the switch roof 1 4 6 enable configure terminal here we are going to set the hostname as room - 1 4 6 now we are going to set that line passwords on these devices coming to the router line console 0 we are going to set the password and Cisco then login now we will go to line vty is 0 to 15 password a Cisco login coming to the switch line console 0 password a Cisco login now we will go to line vty the lines from 0 to 15 password a Cisco login coming to the router now we are going to set a privilege to exit password configure terminal here we are going to enable secret as the password specified its class and now we are going to encrypt all plaintext passwords using Suri's password encryption also here we are going to set appropriate banner so banner motd delimiter the message here we are going to give warning right now coming to our suture room 1 4 6 first we will set privilege to exit password configure our terminal enable secret password is class now we will encrypt all plaintext passwords using surveys password encryption and we are going to set the banner banner motd the delimiter warning right now we are going to set the IP address as per the a crossing table here we can see that for the router from floor 14 for the interface the gigabit attorney rose larner over here to set this IP address here we can see the subnet mask and for the interface gigabit ethernet 0/1 here is the IP address and it is subject to mask right we will configure in this router so we have to come to the interface interface Gigabit Ethernet 0/0 and here we are going to set the IP address here is the actress and subject to mask 255 dot 255 dot 255 dot 0 and we are going to give no shut command right coming to the next interface that is a you have to exit from here on we have to go to the interface Gigabit Ethernet 0 / 1 and we are going to set the IP address it's a 30.2 1 and now we have to give that it to mask 255 dot 255 dot 255 or 0 and you know should command well now we will configure the accessing for these devices which are room - 1 4 6 right we will exit and we have to go to the interface oh configure terminal interface vlan1 and here we are going to set the IP address here is the UH trust for the switch and submit to mask 255 dot 255 dot 255 dot 0 and you know should command right now we will set a default gateway for this suture room - 1 4 6 before going to the configuration here we can see this Suchi is connected to the interface here we can see that Gigabit Ethernet 0/1 on this router floor 14 it's obviously the default gateway for these devices not only for this switch room - 1 4 6 also for this a managed or - B and reception - be the default gateway will be the IP address of this interface here we can see that IP address it's 120 8.1 or 7.30 dot 1 so we will set that for this switch so we will exit and we will set the default gateway you have to go to IP default gateway right now we are going to set the default gateway here I already copied that atras right well now we will say with the configuration of this device such a room - 1 4 6 copy running-config - startup config now we are going to check this into devices manager - B and the reception - be coming - manager - B desktop IP configuration here we can see that we are going to match with our a trussing table right here we can see that - manager - B it's 120 8.1 or 7.30 dot 25 yes it's correct and here we can see the sub - mask yes it's correct and here we can see default gateway is not set so we are going to set the default gateway so here the default gateway is so one 28.1 not 7.30 dot 1 right so we'll copy this now we will let's check with the reception B IP configuration reception here we can see that 128 or 2 1 or 7.30 dot 30 here we can see that they are saying the IP ultros incorrectly so here are they given 20 dot 34 the addressing table it's 30 dot 30 I know we will set the default gateway right also we will check these two systems a manager - a and reception - a according to our a crossing table coming to manage or a IP configuration here we can see that manager a it's 20.25 yes it's correct so we have to set the default gateway so for this PC the default gateway here we can see that this network is connected to this interface a Gigabit Ethernet 0/0 on this router floor 14 so the IP address of this interface will be the default gateway for all these devices right here we can see that a truss I am going to copy this so that it will be more faster right so we are going to change the default gateway now we will let's check the or reception - a here we can see the across it's 20 or 30 yes it's correct now we will set the default gateway here right now we are going to save the configuration in this router also password with Cisco enable password is class so we are going to copy from running config to static config now we will think the device each other we will get the IP address of a managed or B here we can see that coming to manager a command prompt - here we are going to pin to manager B yes we are getting to replay now we will let try from reception a to manager B yes we are getting the replay now we will get the IP address of a reception be coming to manage or a ping to reception B yes we are getting to replay now we will do it from reception a to reception B yes we are getting the replay yes that's all in this pie Curtis our activities skills integration challenge here we have seen only the basic configurations and NT to enter connectivity here we can see our completion status 100 out of 100 so friends if you have any doubt in this pie Curtis or activity please comment below also if you like my video give a thump also share & subscribe the channel thank you

Channel: Tech Acad

Views: 64,469

Keywords: Device Basic Settings

Id: iE1hwjkoSpw

Length: 15min 30sec (930 seconds)

Published: Sun Dec 24 2017