6.4.1 Packet Tracer - Implement Etherchannel

hi friends welcome tour in this video we are going to solve the packet tracer activity implement a third channel before coming to this activity fronts if you like to get any networking project or CCNA online classes you can contact our team using our website link you will get from the description below and also if you like to get this type of technical videos in future considered subscribing also don't forget to enable that bill icon near to the subscribe button so that you will get notification message whenever we upload a new video okay now back to our activity here we can see the objectives in part 1 built the network in Part II to configure a third channel we will go through the background you have been assigned the task of designing and a third channel implementation for a company that wants to improve the performance of their switch Chang links you will try several different ways of implementing the third channel links in order to evaluate which is the best for the company you will build the topology configure trunk ports and implement LACP and pagp other channels we will go to the instructions in part 1 build the network use the table below to build the switch topology step 1 obtain the devices that are iraq u8 click the network devices icon in the bottom toolbar then I click the switches entry in the submenu locate the 2 9 6 euros which I can click and drag the icon for the tuner 6 or switch into the topology area also they specify the number of us we just are required for this activity repeat the step above so that there are 3 2 9 6 0 series switches in the topology area then we have to arrange the devices into a layout that you can work with by clicking and dragging okay here we can see Network Devices so we'll choose the network devices and we'll go to as witches and here we have 2 9 6 0 series which will pass control from keyboard and click on this switch so that we can add multiple devices then press escape next we will go to step 2 name the devices the devices have default names that you will need to change so here we can see we have to change these default switch names you will name the devices SW a SW b and SW c you are changing the display names of the devices this is the texture label that appears below each device it is not the host name yes your display names must match the name that are given in this step exactly if a display name does not match you will not be scored for your device configuration yes so we have to keep in mind we are not going to set the hostname this is only the display names for these devices and this is available only in this packet racer and we have to give these are active names what they specified and it's only for a scoring purpose okay you will click on this switch and we'll give SW aim okay right and we'll go to this s which you will give SW B and this is SW see the device a display name that is a below the device icon hair texture file it should appear with the flashing insertion point if the configuration window for the device appears close it and they try again by clicking a little further away from the device icon yeah anyway so we done we labeled these switches so make sure that you are going to click on exactly on this texture so that you can edit it yeah don't click on this switch so that you will get this second figuration window so exactly I have to click right and yes we know all these basic settings with a packet tracer right now replace the current a display name with the appropriate display and name be given s W a s WB and SW c repeat until all devices are named yeah it's done so now we will go to step 3 connect the devices click the orange lightning bolt connections icon in the bottom toolbar locate the third straight through cable icon it looks like a solid black diagonal line okay coming tor packet tracer here we can see that lightning bolt so it's called connections ok click on connections and here we can see copper straight through so we will click on this copper straight through okay now to connect the device click the Ethernet straight through cable icon and then click the first device that you want to connect select the correct port and then click the second device select the correct port and the device will be connected connect to the devices as specified in the table below here we can see devices SW a to SW B we have to connect to G 0 / 1 to G 0 / 1 and G 0 / 2 to G 0 / 2 okay here here we can see that a symbol when we click on this cable so instead of here just I am going to press escape ok then we are going to press control from keyboard so that we can do multiple connectivity so just press control then click on this copper spray through then as specified here from SWA to s WB click on SW a will connect to G 0 / 1 then on s WB g 0 / 1 also we have to connect G 0 starts - to G 0 / - redundant connections right so G 0 starts - to s WB g 0 / - next is from SW a to SW C and we can see the port FA 0 / 21 - FA 0 / 21 and FS 0 / 22 - FS 0 / 22 ok click on SWA you will connect to FA 0 / 21 and here we can see that then on SW c FS 0 / 21 again from SW a FA 0 strands 22 SW c FK 0 / 22 that means a faster third 0 / 22 then here we can see from s WB to SW see here we have to connect to FS 0 / 2 and E 3 - FS 0 / 23 then FS 0/24 - FS 0/24 so we'll go to s WB click on s WB then FS 0 / turn d3 SW c FS 0 / 23 then again from SW b FS 0/24 - SW c fa 0 slash 24 now we connected our devices now we can press escape ok coming to party - configure a third channel on each switch configure the ports that will be used in the port channels as static Chung ports okay before coming to this a third channel configuration here we can see this completion status shows a 12 percentage once we connected these devices okay now in step 1 configure a pagp a third channel follow the procedure that was used in previous activities to configure port channel 1 as a pagp Hetal channel between SW a and SW B both sides should negotiate their third channel ok we will configure this a pagp at our channel and coming to a dessert table we can see devices SW a to SW b type is a pagp and we can see port connected also we can see port channel 1 so we can do this configuration the whole we will go to yes W switch click on SW a we will go to CLI and will go to these ports that is G 0 / 1 and the G 0 starts - so we enable configure terminal be given in short confetti then we will go to those interfaces or cell range that is a G 0 / 1 - 2 that means both interfaces G 0 / 1 energy 0 / 2 and here we are going to give a speech port more desert trunk just I will expand this window okay then press Enter right now we will shut down these ports then we will create the a group it's a 1 and we will give them mode we can put a question mark and we can see different modes here yeah space then question mark so that we can see all the modes how here we have to give a desirable so enable pagp and conditionally okay will give a desirable here ok then press Enter and here we can see the message creating a poor channel interface for channel 1 then we will give in our own command then we will exit then we can go to that interface that is poor channel sure we can see just a press tab button port - channel it's a 1 ok then press enter and if we can give a support modest trunk now we will go to s WB and it will configure pagp at our channel for this port G 0 / 1 and G 0 / - coming - s WB enter enable Kunti you will go to interfaces arrange G 0 / 1 and it - so G 0 / 1 - 2 then press enter then we will give switch port or does a trunk then we will shut down these ports then we will create channel group it's a one mode desirable and here we can see creating a port channel interface port channel one okay then presenter no we will give an ocean command we will exit then we will go to interface port channel one and we will give a support modest trunk okay just will go to this SW a and we can see they are in number and after some time we can see this link become a green okay so this will go to SW a just will end and will give you the command show will give a a third channel right the third channel summary and we can see the details it's here here we can see Group 1 port channel is support channel 1 and because we can see its su protocol we use the pagp and we can see the ports in usage e 0 / 1 and G 0 / 2 and the flag is P P means here we can see its import channel it's working right also we can verify so interfaces trunk and here we can see that port channel 1 mode is on encapsulation okay then status tracking and it's in a native VLAN 1 now we will go to step to configure LACP a pair channel configure port channel 2 as an LACP channel between SW a and SW see both sides should negotiate the your channel sure we are going to configure from SW a to SW c and the type is L a CP and here we can see a poor channel too and so we can see the port connections FS 0 / 21 and FS 0 / 22 so first of all we will go to SWA kunti then we will go to those interfaces a cell range that is FA 0 / 2120 - okay then press Enter now we will give a switch port modest trunk then we will shut down these ports even we can do without shutting down but it's better to shut down and do each channel group 2 mode we'll put a question mark after more space then question mark and here we can see we will give this an active command enable LACP and conditionally so we'll give active ok then press ENTER and we can see creating a port channel interface port channel - you know we will give no on command then exit then we will go to the support channel interface port channel it's a - right and we have to give a switch port more desert trunk next we will go to SW c and we will configure LACP at our channel for ports FS 0 starts 21 and at 22 which is connecting to SW a write enable Kunti will go to interface as a range FA 0 slash 21-22 ok then we will give a switch port more desert trunk he will shut down these ports then we will create child group it's a two mode will give us active that means LACP okay so creating a poor channel interface port channel - we will give an ocean on command then we will exit then go to that interface that is a port channel - then we will give a switch port more desert trunk now we can verify the configuration you will go to SWA CLI and here we can give the show command show at our channel summary will give end then give a show a third channel summary and we can see the details group to be created for channel to protocol you can see LACP and we can see the ports we used here phase 0 / 21 and FA 0 / 22 and also we can verify a show interface as trunk command and we can see now both port channel that is poor channel 1 and for channel 2 are trunking also we will verify in this switch s WC piant show a third channel summary ok and we can see group 2 for channel 2 and the protocol is LACP and we can see the port's FS 0 / 21 and FS 0 / 22 is bundled together to form these LACP also we can give the command sure interfaces trunk and we can see the support channel 2 is a shrinking coming to the final step step 3 configure a backup LACP at our channel configure for channel 3 channel as Annaleigh CP channel between SW b and SW c in this case SW c initiates negotiation with s WB s WB does not initiate a negotiation of that channel ok we will configure on s WB and SW c and coming to this a table here we can see port channel 3 for the devices SW b and SW c and we can see port connections FS 0 / 23 + FS 0/24 here also we have to use this a type LACP here once more we will let's see the instruction c SW c initiates a negotiation with SW b and as WB does not initiate negotiation of the channel so just will go to SW c and we will configure a first we'll go to SW sivan we can do it as WB so first of all we will go to SW c that's WC okay enable kind of T expand this window and we'll go to interface as a range that is FS 0 / 23 - 24 he will give a switch port more does a trunk then we will shut down then we will create the channel group it's 3 right then mode we will give us active so we can see active after mode space active so it's enable LACP and conditionally okay so we can give that active so poor channel 3 is created now we will give an hour shutdown command just we exit and go to that interface that is port channel 3 then we will give support the model set trunk give end then we will use the show command show a third channel summary and the here we can see group of three for channel three protocol is LACP and the ports we've used also will verify show interfaces trunk and occur we can see only port channel two because we have to configure the other side also now we will configure in this switch swb and here we can see as WB does not initiate a negotiation of the channel ok so this will go to s WB enable configure we'll go to those interface and cell range that is FS 0 slash 23 and 24 then we will give a switch port modisett trunk then we will shut down all these ports then we'll create the channel group that is 3 then we will give the mode here will protect which in mark and here we can see enable LACP only if a LACP device is detected so we will give this a passive commandeer pass you then we will give no on command then we will exit will go to that interface even in order to give that anyways how we will give interface its port channel 3 then we will give a support more desert trunk ok now we will end and we will give the show command show a third channel summary and here we can see blue path 3 port channel 3 created protocol is LACP and the ports be bundled now we can verify ashore interfaces a trunk so we can see 4 channel 3 is a trunking now even we can verify in SW see also show interfaces a trunk and we can see this poor channel 3 is trunking po3 Modi's own encapsulation status trunking ok now we can see our completion status of this activity it's 100% so dear affirms in this video we sold this packet racer activity implement a third channel now dear friends if you have any doubt and inside regarding this activity please comment below and if you liked our video give it thumb and share with all your friends and also if you like to contact our team for any technical support you can visit our website link you will get from the description below stay tuned and we will meet again with the next video thank you

Channel: Tech Acad

Views: 52,786

Keywords: CISCO, CCNA, CCNAv7, CISCO Certification, Etherchannel, Channel-group, LACP, Packet Tracer

Id: uNRBV-wYI50

Length: 24min 45sec (1485 seconds)

Published: Thu Jun 25 2020