2분30초 스피드 윈도우 설치 끝 / ISO 빠른설치 VENTOY / 무료 마이그레이션

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
USB memory, card reader, or any external hard drive I will use an external hard drive for testing Check that the file is on the external drive and install Yes Be careful because all data will be erased It will be finished in about 5 to 10 seconds. Copy any iso file you want and put it in the VENTOY drive. If you have done this far, you are ready to boot with the iso file. When booting based on the msi motherboard, press F11 repeatedly = boot selection VENTOY Select the external hard drive to boot into VENTOY Keyboard arrow keys up and down ISO What if you can choose a file and want to install Windows 10? Select Windows 10 ISO and enter...Start Windows installation. The convenient point is to use VENTOY . If you do not like the drive ISO created by the VENTOY program, delete it immediately and insert a new ISO file, then you can select it from the VENTOY menu . This time, if you choose the external hard drive with VENTOY installed , you can select the iso file you just added . Yes , this will initialize the drive. So, press format and check start. This will return to normal as a single external hard drive. Here I thought that installing an external hard drive rather than a usb memory would be a little faster , and if you make an external ssd rather than an external hard drive It 'll be a little faster , so wouldn't it be faster if I make it with pcie 3.0 nvme ssd? I 'll try to make the Windows installation speed that Koreans like . Case USB 3.2 as a storage medium First, I will put my Toshiba Q300 PRO 256GB SSD into the external hard case. This is the You Green 2.5-inch external hard case (plastic material) . ... It's easy to separate, but it's simple, just put it as it is and close the lid . The external hard case is easy to combine . Next, I 'll show you the Windows installation that suits the speed of Koreans that I want. U Green M2 SSD Case USB C 3.2 Gen2 Max . It said that it supports 10Gbps , but both sides of the usb C type cable did it without damage to the usb C type cable vinyl ... is rubber...you don't have to take off the rubber for protecting the corners ...a man who didn't read the manual... there is an arrow so the aluminum part comes down . There was no need to remove the rubber. The manual just fell out like this. The specification in the manual is like this. M.2 fixing part This part is soft like rubber . After mounting, insert this part where the M.2 is fixed in the middle like this and press it into the hole below here to fix it . M.2 ssd case is available , so migration will be easier Download and run. When the window pops up, download as it is, click next, click again, click agree, then check for personal use, uncheck next , then and then complete the installation of the original ssd on the motherboard If you click the ssd name once, click Clone this disk and select the disk to clone Press the USB connected one and press Copy Adjust the capacity to match Next Next Confirm completion Here , the computer will be turned off when cloning is finished . Press after cloning and press Exit to automatically shut down the computer when cloning is complete. Auto shutdown after cloning is complete . When the PC auto-off is finished, remove the original ssd and UGREEN M2 SSD I removed the case ssd and the Windows was copied here, so I put it in the place of the SSD and turn on the computer. When I turn on the computer, it boots up as it is. I can see that all the contents are copied normally without any empty partitions . Now I start the speed test first. Crystal The DiskInfo YouGreen M2 SSD case has a maximum read/write limit of over 1GB just like USB 3.2 . Well... What do you mean by the speed of the old USB 2.0 memory? It's outdated... Accidentally, there is no video on the 2.5 inch ssd. I tried to edit it, but I did not press the record button... Humanity... The next button on the Windows 11 installation selection screen and the time measurement started at the same time I compared the time at the first screen after completing the Windows installation 2.0 Memory Late 6 minutes...The other two are less than 3 minutes One strange thing is that even USB 3.2 does not show a big difference from an external HDD HDD in Windows installation . Look , I tried copying and pasting a single file 1.65 gigabytes Oh... I'm afraid I'm finished with the words, one is already finished Copying a single file Here , USB 3.2 performance is certain. All that 's left is... an old USB 2.0 memory . .. Then, this time it is not a single file, but a 2.16 giga folder containing 4294 files . If you look at how the folder is copied, the speed is maintained differently from a single file, but after meeting a wall (?) in the middle, the speed slows down. Still, USB 3.2 The case will end first, followed by the external ssd. The remaining two files that are still being copied will pass due to time constraints. If you wait for all of this, it will take a very long time . The storage device is full... How much capacity have you collected? 8TB HDD empty slot... Fishing 8TB HDD 16TB HDD Miner Edition If this is enough, I can make many folders(?)... What kind of folder is it?
Info
Channel: playsin플레이신
Views: 329,829
Rating: undefined out of 5
Keywords:
Id: BmHx9XNa0Gw
Channel Id: undefined
Length: 8min 23sec (503 seconds)
Published: Tue Aug 30 2022
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.