2 Air lift water well pumps part 1 of 5 in elgin texas

all right here's an update on my airless pump it's been running for a couple weeks now and it's running really nice probably ten gallons per minute want to open it wide open but right now I have a bleed off valve going into the goldfish pond to aerate it I don't know if you can see that but anyway hide some leftover pipe and parts so I decided to put another airlift pump down the hole and what I did was I took some leftover stuff and I got this tee here three-quarter inch tea that has a female on the end on the inside of that tee and I threaded another 3/4 inch and I doubted it down to 1/2 inch so basically my water delivery is going to be this 3/4 inch tube this is another airlift pump just with spare parts and then the air is going to come in right here there is coming in on this half-inch it's adapted to 3/4 the air will come in here and try to shoot back up here and I made this really small with spare parts to see if I can get it to fit down my 4-inch casing here where I used to have my hand pump on this sweet tee right here this is an inch and a quarter black poly with a 1/2 inch tubing and I'm going to attempt to fish down this little bitty miniature airlift pump to see what I can get out of that compare to the other ones plus I'll have two little airless pumps in the hole and I'll set up my tee assembly here for the extra pump now I'll give you updated video to show you how it works so I will start to fish this down here I don't even know if it's going to fit I might have to go in from the top anyway I better stop the video to try to get this down the hole because this is going to take two hands alright there's an update so far I'm going to try to put two airless pumps in a four inch casing and I don't think it's going to fit but I'll try

Channel: frytvnow

Views: 337,866

Rating: 4.3795013 out of 5

Keywords: Air, lift, water, well, pumps, in, elgin, texas, hand, pump

Id: aVC-z3GyLk8

Length: 2min 9sec (129 seconds)

Published: Tue Jun 15 2010