#194 RFid Anruhoo HachanLun NFC Copy Duplicator Reader Writer iCopy

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
hello and welcome back today i'm going to play a little bit with the rfid copy machine this is the 10 in one so it can then do 10 different frag frequencies and i'm just i'm just gonna play a bit with it and show you how to copy how to connect it to the computer and how you can also use the software that is inside the machine it's kind of a usb stick and i got questions about this on my channel so that's why i decided to make a separate video for it uh also so it's this machine well here it goes okay here is the rfid copier it can do 10 frequencies and it comes with one pack of cards for 125 kilo edge and it comes with a type a and also 125 kilo edge patches any usb cable you need to put little batteries i put some cheap ones in and how does it work well it actually works really simple you switch it on you can see the version number 300 you get the disclaimer be careful what you copy okay and you have here the little back button that goes to the menu here you can select the language well english or chinese that's good you have some system information which is the serial number and the version number and well here in the back you put the card so if you have a batch you just put a on it in the middle yeah and if you have a card i have a card here you just put it like this so how does it work well this is an actual card so i will just hide a little bit the number um here you have the types of patches you can do so you can switch the telephone if you are not sure you just push the scan button instead of the read button so i don't know so i just put my card in the back i will do scan and it will automatically detect why it says it's a type a and it already found the number um then you need to know this is the type a and this is the 125 hertz here so i just get one of these because this is also type a or if you're not sure which one you need you just put it in the button you type a scan and you see it says type a this one i put in the bottom screen and it says it's a 125. and the cards that came with it are 125. only they are empty so it doesn't it it doesn't seem they work so what i do i held it a little bit in the light i can see the chip is here so with the top so probably if i read our skin it will do a failure because yeah it fails so it looks like the card is not good but it is working they are just empty so this one is also 125 so what i do is hold it in the bottom i try scan it has a coat when i put it now in the back and i put right it says successfully so if i now put it back and i do a scan it detects so they do work but they are empty so it seems you you would maybe expect that it would output a lot of zeros and say what kind of card it is but it doesn't so these are 125s and they do work here i bought another type a and another 25. these were already programmed but you can just override them so don't think your cards are broken because they're probably not so now i'm going to copy my card disclaimer yes i do scan here it is put one of my badges put the right button done and if i read i do wish again it did take oh it fails now what is it there it is so now these are the same that's how it works how you connect to the computer so the software is actually in this machine it is a bit tricky how to find it and it took me some time before i found out so what you do you just put this in your usb you put that in the computer so i will do that and then you switch it on you wait now you see this message and you don't push okay you need to wait and as you can see my computer already detected before the software and now you see it opened a memory stick so now it is open and now you can just copy it to your desktop and if you now push okay it will close automatically the usb drive then uh sometimes it says it's not connected and what i do then is just i switch it off i switch this one off then i switch it back on again push okay and then you wait and if you then start the sofa it works but you only need to the to use the computer with the software if your card is encoded but then you probably also need to think do i really want to copy this card because there is probably a reason that it is coded but let's say you still decide that you want to do that then you can use the software and i will start it so first thing you do switch it on wait for the message click okay and what now you wait like 10 seconds and you start the software and then here in the bottom you can see it's connected here in the bottom you can see it's connected and i think what you need to do is first put the card in the button and then you click the start button and then you see it is trying to decode it well this one was not coded and now it says in the display the coding successful right to the card so now i get my card or my key put it on the bottom and i do the right button card purchase please call now it says uuid right failed but the data right was successful but that makes sense because it was not coded but this is how works so like a lot of things when you know how to do it it's not that complicated and it's actually quite straightforward now i know how i was able to copy one of my cards and it was actually functional i tried it already so uh i like it it's pretty nice especially with the provided cards that was also a tricky because they seem broken but they aren't empty or not so i hope that helps thank you for watching and i hope to see you next time
Info
Channel: Tony Albus
Views: 58,492
Rating: undefined out of 5
Keywords: RFID, NFC, HanchanLun, Anruhoo, copy, icopy, OBO, smartcard, smart card, nfcpro, nfcpro2020, WildFire, Wildfire 2020
Id: 0SewclaC8Y4
Channel Id: undefined
Length: 8min 57sec (537 seconds)
Published: Fri Jul 09 2021
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.